#!/usr/bin/env python3 # # hello.ICS-43434.RP2040 # ICS-43434 RP2040 hello-world # # Neil Gershenfeld 11/4/24 # # This work may be reproduced, modified, distributed, # performed, and displayed for any purpose, but must # acknowledge this project. Copyright is retained and # must be preserved. The work is provided as is; no # warranty is provided, and users accept all liability. # ############################################################ # uncomment for desired output ############################################################ #output = "top, labels, and exterior" #output = "top, labels, and holes" #output = "top, labels, holes, and exterior" #output = "top, bottom, labels, and exterior" output = "top, bottom, labels, holes, and exterior" #output = "top traces" #output = "top traces and exterior" #output = "bottom traces" #output = "bottom traces reversed" #output = "bottom traces reversed and exterior" #output = "holes" #output = "interior" #output = "holes and interior" #output = "exterior" #output = "top solder mask" #output = "bottom solder mask" #output = "labels" #output = "labels minus top mask" ############################################################ # import ############################################################ import math,json,sys ############################################################ # define shapes and transformations ############################################################ # color(color,part) # circle(x,y,r) # cylinder(x,y,z0,z1,r) # cone(x,y,z0,z1,r) # sphere(x,y,z,r) # torus(x,y,z,r0,r1) # rectangle(x0,x1,y0,y1) # cube(x0,x1,y0,y1,z0,z1) # line(x0,y0,x1,y1,z,width) # right_triangle(x,y,h) # triangle(x0,y0,x1,y1,x2,y2) (points in clockwise order) # pyramid(x0,x1,y0,y1,z0,z1) # function(Z_of_XY) # functions(upper_Z_of_XY,lower_Z_of_XY) # add(part1,part2) # subtract(part1,part2) # intersect(part1,part2) # move(part,dx,dy) # translate(part,dx,dy,dz) # rotate(part, angle) # rotate_x(part,angle) # rotate_y(part,angle) # rotate_z(part,angle) # rotate_90(part) # rotate_180(part) # rotate_270(part) # reflect_x(part,x0) # reflect_y(part,y0) # reflect_z(part,z0) # reflect_xy(part) # reflect_xz(part) # reflect_yz(part) # scale_x(part,x0,sx) # scale_y(part,y0,sy) # scale_z(part,z0,sz) # scale_xy(part,x0,y0,sxy) # scale_xyz(part,x0,y0,z0,sxyz) # coscale_x_y(part,x0,y0,y1,angle0,angle1,amplitude,offset) # coscale_x_z(part,x0,z0 z1,angle0,angle1,amplitude,offset) # coscale_xy_z(part,x0,y0,z0,z1,angle0,angle1,amplitude,offset) # taper_x_y(part,x0,y0,y1,s0,s1) # taper_x_z(part,x0,z0,z1,s0,s1) # taper_xy_z(part,x0,y0,z0,z1,s0,s1) # shear_x_y(part,y0,y1,dx0,dx1) # shear_x_z(part,z0,z1,dx0,dx1) true = "1" false = "0" def color(color,part): part = '('+str(color)+'*(('+part+')!=0))' return part Red = (225 << 0) Green = (225 << 8) Blue = (225 << 16) Gray = (128 << 16) + (128 << 8) + (128 << 0) White = (255 << 16) + (255 << 8) + (255 << 0) Teal = (255 << 16) + (255 << 8) Pink = (255 << 16) + (255 << 0) Yellow = (255 << 8) + (255 << 0) Brown = (45 << 16) + (82 << 8) + (145 << 0) Navy = (128 << 16) + (0 << 8) + (0 << 0) Tan = (60 << 16) + (90 << 8) + (125 << 0) def circle(x0,y0,r): part = "(((X-(x0))*(X-(x0)) + (Y-(y0))*(Y-(y0))) <= (r*r))" part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('r',str(r)) return part def cylinder(x0,y0,z0,z1,r): part = "(((X-(x0))*(X-(x0)) + (Y-(y0))*(Y-(y0)) <= (r*r)) & (Z >= (z0)) & (Z <= (z1)))" part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('z0',str(z0)) part = part.replace('z1',str(z1)) part = part.replace('r',str(r)) return part def cone(x0,y0,z0,z1,r0): part = cylinder(x0, y0, z0, z1, r0) part = taper_xy_z(part, x0, y0, z0, z1, 1.0, 0.0) return part def sphere(x0,y0,z0,r): part = "(((X-(x0))*(X-(x0)) + (Y-(y0))*(Y-(y0)) + (Z-(z0))*(Z-(z0))) <= (r*r))" part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('z0',str(z0)) part = part.replace('r',str(r)) return part def torus(x0,y0,z0,r0,r1): part = "(((r0 - sqrt((X-(x0))*(X-(x0)) + (Y-(y0))*(Y-(y0))))*(r0 - sqrt((X-(x0))*(X-(x0)) + (Y-(y0))*(Y-(y0))) + (Z-(z0))*(Z-(z0))) <= (r1*r1))" part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('z0',str(z0)) part = part.replace('r0',str(r0)) part = part.replace('r1',str(r1)) return part def rectangle(x0,x1,y0,y1): part = "((X >= (x0)) & (X <= (x1)) & (Y >= (y0)) & (Y <= (y1)))" part = part.replace('x0',str(x0)) part = part.replace('x1',str(x1)) part = part.replace('y0',str(y0)) part = part.replace('y1',str(y1)) return part def cube(x0,x1,y0,y1,z0,z1): part = "((X >= (x0)) & (X <= (x1)) & (Y >= (y0)) & (Y <= (y1)) & (Z >= (z0)) & (Z <= (z1)))" part = part.replace('x0',str(x0)) part = part.replace('x1',str(x1)) part = part.replace('y0',str(y0)) part = part.replace('y1',str(y1)) part = part.replace('z0',str(z0)) part = part.replace('z1',str(z1)) return part def line(x0,y0,x1,y1,z,width): dx = x1-x0 dy = y1-y0 l = math.sqrt(dx*dx+dy*dy) nx = dx/l ny = dy/l rx = -ny ry = nx roundoff = 1e-6 part = "((((X-(x0))*(nx)+(Y-(y0))*(ny)) >= 0) & (((X-(x0))*(nx)+(Y-(y0))*(ny)) <= l) & (((X-(x0))*(rx)+(Y-(y0))*(ry)) >= (-width/2)) & (((X-(x0))*(rx)+(Y-(y0))*(ry)) <= (width/2)) & (Z > (z-roundoff)) & (Z < (z+roundoff)))" part = part.replace('x0',str(x0)) part = part.replace('x1',str(x1)) part = part.replace('y0',str(y0)) part = part.replace('y1',str(y1)) part = part.replace('nx',str(nx)) part = part.replace('ny',str(ny)) part = part.replace('rx',str(rx)) part = part.replace('ry',str(ry)) part = part.replace('l',str(l)) part = part.replace('z',str(z)) part = part.replace('roundoff',str(roundoff)) part = part.replace('width',str(width)) return part def right_triangle(x0,y0,l): part = "((X >= x0) & (X <= x0 + l - (Y-y0)) & (Y >= y0))" part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('l',str(l)) return part def triangle(x0,y0,x1,y1,x2,y2): # points in clockwise order part = "(((((y1)-(y0))*(X-(x0))-((x1)-(x0))*(Y-(y0))) >= 0) & ((((y2)-(y1))*(X-(x1))-((x2)-(x1))*(Y-(y1))) >= 0) & ((((y0)-(y2))*(X-(x2))-((x0)-(x2))*(Y-(y2))) >= 0))" part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('x1',str(x1)) part = part.replace('y1',str(y1)) part = part.replace('x2',str(x2)) part = part.replace('y2',str(y2)) return part def pyramid(x0,x1,y0,y1,z0,z1): part = cube(x0, x1, y0, y1, z0, z1) part = taper_xy_z(part, (x0+x1)/2., (y0+y1)/2., z0, z1, 1.0, 0.0) return part def function(Z_of_XY): part = '(Z <= '+Z_of_XY+')' return part def functions(upper_Z_of_XY,lower_Z_of_XY): part = '(Z <= '+upper_Z_of_XY+') & (Z >= '+lower_Z_of_XY+')' return part def add(part1,part2): part = "part1 | part2" part = part.replace('part1',part1) part = part.replace('part2',part2) return part def subtract(part1,part2): part = "(part1) & ~(part2)" part = part.replace('part1',part1) part = part.replace('part2',part2) return part def intersect(part1,part2): part = "(part1) & (part2)" part = part.replace('part1',part1) part = part.replace('part2',part2) return part def move(part,dx,dy): part = part.replace('X','(X-('+str(dx)+'))') part = part.replace('Y','(Y-('+str(dy)+'))') return part def translate(part,dx,dy,dz): part = part.replace('X','(X-('+str(dx)+'))') part = part.replace('Y','(Y-('+str(dy)+'))') part = part.replace('Z','(Z-('+str(dz)+'))') return part def rotate(part,angle): angle = angle*math.pi/180 part = part.replace('X','(math.cos(angle)*X+math.sin(angle)*y)') part = part.replace('Y','(-math.sin(angle)*X+math.cos(angle)*y)') part = part.replace('y','Y') part = part.replace('angle',str(angle)) return part def rotate_x(part,angle): angle = angle*math.pi/180 part = part.replace('Y','(math.cos(angle)*Y+math.sin(angle)*z)') part = part.replace('Z','(-math.sin(angle)*Y+math.cos(angle)*z)') part = part.replace('z','Z') part = part.replace('angle',str(angle)) return part def rotate_y(part,angle): angle = angle*math.pi/180 part = part.replace('X','(math.cos(angle)*X+math.sin(angle)*z)') part = part.replace('Z','(-math.sin(angle)*X+math.cos(angle)*z)') part = part.replace('z','Z') part = part.replace('angle',str(angle)) return part def rotate_z(part,angle): angle = angle*math.pi/180 part = part.replace('X','(math.cos(angle)*X+math.sin(angle)*y)') part = part.replace('Y','(-math.sin(angle)*X+math.cos(angle)*y)') part = part.replace('y','Y') part = part.replace('angle',str(angle)) return part def rotate_90(part): part = reflect_y(part,0) part = reflect_xy(part) return part def rotate_180(part): part = rotate_90(part) part = rotate_90(part) return part def rotate_270(part): part = rotate_90(part) part = rotate_90(part) part = rotate_90(part) return part def reflect_x(part,x0): part = part.replace('X','(x0-X)') part = part.replace('x0',str(x0)) return part def reflect_y(part,y0): part = part.replace('Y','(y0-Y)') part = part.replace('y0',str(y0)) return part def reflect_z(part,z0): part = part.replace('Z','(z0-Z)') part = part.replace('z0',str(z0)) return part def reflect_xy(part): part = part.replace('X','temp') part = part.replace('Y','X') part = part.replace('temp','Y') return part def reflect_xz(part): part = part.replace('X','temp') part = part.replace('Z','X') part = part.replace('temp','Z') return part def reflect_yz(part): part = part.replace('Y','temp') part = part.replace('Z','Y') part = part.replace('temp','Z') return part def scale_x(part,x0,sx): part = part.replace('X','((x0) + (X-(x0))/(sx))') part = part.replace('x0',str(x0)) part = part.replace('sx',str(sx)) return part def scale_y(part,y0,sy): part = part.replace('Y','((y0) + (Y-(y0))/(sy))') part = part.replace('y0',str(y0)) part = part.replace('sy',str(sy)) return part def scale_z(part,z0,sz): part = part.replace('Z','((z0) + (Z-(z0))/(sz))') part = part.replace('z0',str(z0)) part = part.replace('sz',str(sz)) return part def scale_xy(part,x0,y0,sxy): part = part.replace('X','((x0) + (X-(x0))/(sxy))') part = part.replace('Y','((y0) + (Y-(y0))/(sxy))') part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('sxy',str(sxy)) return part def scale_xyz(part,x0,y0,z0,sxyz): part = part.replace('X','((x0) + (X-(x0))/(sxyz))') part = part.replace('Y','((y0) + (Y-(y0))/(sxyz))') part = part.replace('Z','((z0) + (Z-(z0))/(sxyz))') part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('z0',str(z0)) part = part.replace('sxyz',str(sxyz)) return part def coscale_x_y(part,x0,y0,y1,angle0,angle1,amplitude,offset): phase0 = math.pi*angle0/180. phase1 = math.pi*angle1/180. part = part.replace('X','((x0) + (X-(x0))/((offset) + (amplitude)*math.cos((phase0) + ((phase1)-(phase0))*(Y-(y0))/((y1)-(y0)))))') part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('y1',str(y1)) part = part.replace('phase0',str(phase0)) part = part.replace('phase1',str(phase1)) part = part.replace('amplitude',str(amplitude)) part = part.replace('offset',str(offset)) return part def coscale_x_z(part,x0,z0,z1,angle0,angle1,amplitude,offset): phase0 = math.pi*angle0/180. phase1 = math.pi*angle1/180. part = part.replace('X','((x0) + (X-(x0))/((offset) + (amplitude)*math.cos((phase0) + ((phase1)-(phase0))*(Z-(z0))/((z1)-(z0)))))') part = part.replace('x0',str(x0)) part = part.replace('z0',str(z0)) part = part.replace('z1',str(z1)) part = part.replace('phase0',str(phase0)) part = part.replace('phase1',str(phase1)) part = part.replace('amplitude',str(amplitude)) part = part.replace('offset',str(offset)) return part def coscale_xy_z(part,x0,y0,z0,z1,angle0,angle1,amplitude,offset): phase0 = math.pi*angle0/180. phase1 = math.pi*angle1/180. part = part.replace('X','((x0) + (X-(x0))/((offset) + (amplitude)*math.cos((phase0) + ((phase1)-(phase0))*(Z-(z0))/((z1)-(z0)))))') part = part.replace('Y','((y0) + (Y-(y0))/((offset) + (amplitude)*math.cos((phase0) + ((phase1)-(phase0))*(Z-(z0))/((z1)-(z0)))))') part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('z0',str(z0)) part = part.replace('z1',str(z1)) part = part.replace('phase0',str(phase0)) part = part.replace('phase1',str(phase1)) part = part.replace('amplitude',str(amplitude)) part = part.replace('offset',str(offset)) return part def taper_x_y(part,x0,y0,y1,s0,s1): part = part.replace('X','((x0) + (X-(x0))*((y1)-(y0))/((s1)*(Y-(y0)) + (s0)*((y1)-Y)))') part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('y1',str(y1)) part = part.replace('s0',str(s0)) part = part.replace('s1',str(s1)) return part def taper_x_z(part,x0,z0,z1,s0,s1): part = part.replace('X','((x0) + (X-(x0))*((z1)-(z0))/((s1)*(Z-(z0)) + (s0)*((z1)-Z)))') part = part.replace('x0',str(x0)) part = part.replace('z0',str(z0)) part = part.replace('z1',str(z1)) part = part.replace('s0',str(s0)) part = part.replace('s1',str(s1)) return part def taper_xy_z(part,x0,y0,z0,z1,s0,s1): part = part.replace('X','((x0) + (X-(x0))*((z1)-(z0))/((s1)*(Z-(z0)) + (s0)*((z1)-Z)))') part = part.replace('Y','((y0) + (Y-(y0))*((z1)-(z0))/((s1)*(Z-(z0)) + (s0)*((z1)-Z)))') part = part.replace('x0',str(x0)) part = part.replace('y0',str(y0)) part = part.replace('z0',str(z0)) part = part.replace('z1',str(z1)) part = part.replace('s0',str(s0)) part = part.replace('s1',str(s1)) return part def shear_x_y(part,y0,y1,dx0,dx1): part = part.replace('X','(X - (dx0) - ((dx1)-(dx0))*(Y-(y0))/((y1)-(y0)))') part = part.replace('y0',str(y0)) part = part.replace('y1',str(y1)) part = part.replace('dx0',str(dx0)) part = part.replace('dx1',str(dx1)) return part def shear_x_z(part,z0,z1,dx0,dx1): part = part.replace('X','(X - (dx0) - ((dx1)-(dx0))*(Z-(z0))/((z1)-(z0)))') part = part.replace('z0',str(z0)) part = part.replace('z1',str(z1)) part = part.replace('dx0',str(dx0)) part = part.replace('dx1',str(dx1)) return part def coshear_x_z(part,z0,z1,angle0,angle1,amplitude,offset): phase0 = math.pi*angle0/180. phase1 = math.pi*angle1/180. part = part.replace('X','(X - (offset) - (amplitude)*math.cos((phase0) + ((phase1)-(phase0))*(Z-(z0))/((z1)-(z0))))') part = part.replace('z0',str(z0)) part = part.replace('z1',str(z1)) part = part.replace('phase0',str(phase0)) part = part.replace('phase1',str(phase1)) part = part.replace('amplitude',str(amplitude)) part = part.replace('offset',str(offset)) return part ############################################################ # text classes and definitions ############################################################ class text: # # text class # def __init__(self,text,x,y,z=0,line='',height='',width='',space='',align='CC',color=White,angle=0): # # parameters # if (line == ''): line = 1 if (height == ''): height = 6*line if (width == ''): width = 4*line if (space == ''): space = line/2.0 self.width = 0 self.height = 0 self.text = text # # construct shape dictionary # shapes = {} shape = triangle(0,0,width/2.0,height,width,0) cutout = triangle(0,-2.5*line,width/2.0,height-2.5*line,width,-2.5*line) cutout = subtract(cutout,rectangle(0,width,height/4-line/2,height/4+line/2)) shape = subtract(shape,cutout) shapes['A'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/4)) shape = add(shape,rectangle(width-line,width,0,height/3)) shapes['a'] = shape shape = rectangle(0,width-height/4,0,height) shape = add(shape,circle(width-height/4,height/4,height/4)) shape = add(shape,circle(width-height/4,3*height/4,height/4)) w = height/2-1.5*line shape = subtract(shape,rectangle(line,line+w/1.5,height/2+line/2,height-line)) shape = subtract(shape,circle(line+w/1.5,height/2+line/2+w/2,w/2)) shape = subtract(shape,rectangle(line,line+w/1.5,line,height/2-line/2)) shape = subtract(shape,circle(line+w/1.5,height/2-line/2-w/2,w/2)) shapes['B'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/4)) shape = add(shape,rectangle(0,line,0,height)) shapes['b'] = shape shape = circle(width/2,width/2,width/2) shape = add(shape,circle(width/2,height-width/2,width/2)) shape = add(shape,rectangle(0,width,line+w/2,height-line-w/2)) w = width-2*line shape = subtract(shape,circle(width/2,line+w/2,w/2)) shape = subtract(shape,circle(width/2,height-line-w/2,w/2)) shape = subtract(shape,rectangle(line,width,line+w/2,height-line-w/2)) shapes['C'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/4)) shape = subtract(shape,rectangle(width/2,width,width/2-line/1.5,width/2+line/1.5)) shapes['c'] = shape shape = circle(line,width-line,width-line) shape = subtract(shape,circle(line,width-line,width-2*line)) shape = subtract(shape,rectangle(-width,line,0,height)) shape = scale_y(shape,0,height/(2*(width-line))) shape = add(shape,rectangle(0,line,0,height)) shapes['D'] = shape shape = rectangle(width-line,width,0,height) shape = add(shape,circle(width/2,width/2,width/2)) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shapes['d'] = shape shape = rectangle(0,line,0,height) shape = add(shape,rectangle(0,width,height-line,height)) shape = add(shape,rectangle(0,2*width/3,height/2-line/2,height/2+line/2)) shape = add(shape,rectangle(0,width,0,line)) shapes['E'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = subtract(shape,triangle(width,0,width/2,width/2-line/2,width,width/2-line/2)) shape = add(shape,rectangle(0,width,width/2-line/2,width/2+line/2)) shapes['e'] = shape shape = rectangle(0,line,0,height) shape = add(shape,rectangle(0,width,height-line,height)) shape = add(shape,rectangle(0,2*width/3,height/2-line/2,height/2+line/2)) shapes['F'] = shape shape = circle(width-line/2,height-width/2,width/2) shape = subtract(shape,circle(width-line/2,height-width/2,width/2-line)) shape = subtract(shape,rectangle(0,width-line/2,0,height-width/2)) shape = subtract(shape,rectangle(width-line/2,2*width,0,height)) shape = add(shape,rectangle(width/2-line/2,width/2+line/2,0,height-width/2)) shape = add(shape,rectangle(width/5,4*width/5,height/2-line/2,height/2+line/2)) shapes['f'] = shape shape = circle(width/2,width/2,width/2) shape = add(shape,circle(width/2,height-width/2,width/2)) shape = add(shape,rectangle(0,width,line+w/2,height-line-w/2)) w = width-2*line shape = subtract(shape,circle(width/2,line+w/2,w/2)) shape = subtract(shape,circle(width/2,height-line-w/2,w/2)) shape = subtract(shape,rectangle(line,width,line+w/2,height-line-w/2)) shape = add(shape,rectangle(width/2,width,line+w/2,2*line+w/2)) shapes['G'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) w = height/3-width/2 shape = add(shape,rectangle(width-line,width,w,width)) shape = add(shape,subtract(subtract(circle(width/2,w,width/2),circle(width/2,w,width/2-line)),rectangle(0,width,w,height))) shapes['g'] = shape shape = rectangle(0,line,0,height) shape = add(shape,rectangle(width-line,width,0,height)) shape = add(shape,rectangle(0,width,height/2-line/2,height/2+line/2)) shapes['H'] = shape w = width/2 shape = circle(width/2,w,width/2) shape = subtract(shape,circle(width/2,w,width/2-line)) shape = subtract(shape,rectangle(0,width,0,w)) shape = add(shape,rectangle(0,line,0,height)) shape = add(shape,rectangle(width-line,width,0,w)) shapes['h'] = shape shape = rectangle(width/2-line/2,width/2+line/2,0,height) shape = add(shape,rectangle(width/5,4*width/5,0,line)) shape = add(shape,rectangle(width/5,4*width/5,height-line,height)) shapes['I'] = shape shape = rectangle(width/2-line/2,width/2+line/2,0,height/2) shape = add(shape,circle(width/2,3*height/4,.6*line)) shapes['i'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = subtract(shape,rectangle(0,width,width/2,height)) shape = add(shape,rectangle(width-line,width,width/2,height)) shapes['J'] = shape w = height/3-width/2 shape = rectangle(width/2-line/2,width/2+line/2,w,height/2) shape = add(shape,subtract(subtract(subtract(circle(width/4-line/2,w,width/2),circle(width/4-line/2,w,width/2-line)),rectangle(0,width,w,height)),rectangle(-width,width/4-line/2,-height/3,height))) shape = add(shape,circle(width/2,3*height/4,.6*line)) shapes['j'] = shape shape = rectangle(0,width,0,height) shape = subtract(shape,triangle(line,height,width-1.1*line,height,line,height/2+.5*line)) shape = subtract(shape,triangle(width,0,line+0.8*line,height/2,width,height)) shape = subtract(shape,triangle(line,0,line,height/2-.5*line,width-1.1*line,0)) shapes['K'] = shape shape = rectangle(0,width,0,height) shape = subtract(shape,rectangle(line,width,2*height/3,height)) shape = subtract(shape,triangle(line,2*height/3,width-1.3*line,2*height/3,line,height/3+.5*line)) shape = subtract(shape,triangle(width,0,line+0.8*line,height/3,width,2*height/3)) shape = subtract(shape,triangle(line,0,line,height/3-0.5*line,width-1.3*line,0)) shapes['k'] = shape shape = rectangle(0,line,0,height) shape = add(shape,rectangle(0,width,0,line)) shapes['L'] = shape shape = rectangle(width/2-line/2,width/2+line/2,0,height) shapes['l'] = shape shape = rectangle(0,width,0,height) shape = subtract(shape,triangle(line,0,line,height-3*line,width/2-line/3,0)) shape = subtract(shape,triangle(line,height,width-line,height,width/2,1.5*line)) shape = subtract(shape,triangle(width/2+line/3,0,width-line,height-3*line,width-line,0)) shapes['M'] = shape w = width/2 l = 1.3*line shape = circle(width/2,w,width/2) shape = subtract(shape,circle(width/2,w,width/2-l)) shape = subtract(shape,rectangle(0,width,0,w)) shape = add(shape,rectangle(width-l,width,0,w)) shape = add(shape,move(shape,width-l,0)) shape = add(shape,rectangle(0,l,0,width)) shape = scale_x(shape,0,width/(2*width-l)) shapes['m'] = shape shape = rectangle(0,width,0,height) shape = subtract(shape,triangle(line,height+1.5*line,width-line,height+1.5*line,width-line,1.5*line)) shape = subtract(shape,triangle(line,-1.5*line,line,height-1.5*line,width-line,-1.5*line)) shapes['N'] = shape w = width/2 shape = circle(width/2,w,width/2) shape = subtract(shape,circle(width/2,w,width/2-line)) shape = subtract(shape,rectangle(0,width,0,w)) shape = add(shape,rectangle(0,line,0,width)) shape = add(shape,rectangle(width-line,width,0,w)) shapes['n'] = shape shape = circle(width/2,width/2,width/2) shape = add(shape,circle(width/2,height-width/2,width/2)) shape = add(shape,rectangle(0,width,line+w/2,height-line-w/2)) w = width-2*line shape = subtract(shape,circle(width/2,line+w/2,w/2)) shape = subtract(shape,circle(width/2,height-line-w/2,w/2)) shape = subtract(shape,rectangle(line,width-line,line+w/2,height-line-w/2)) shapes['O'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shapes['o'] = shape shape = rectangle(0,line,0,height) w = 2*height/3 shape = add(shape,circle(width-w/2,height-w/2,w/2)) shape = add(shape,rectangle(0,width-w/2,height-w,height)) shape = subtract(shape,circle(width-w/2,height-w/2,w/2-line)) shape = subtract(shape,rectangle(line,width-w/2,height-w+line,height-line)) shapes['P'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/4)) shape = add(shape,rectangle(0,line,-height/3,width)) shapes['p'] = shape shape = subtract(circle(width/2,width/2,width/2),circle(width/2,width/2,width/2-.9*line)) shape = scale_y(shape,0,height/width) shape = add(shape,move(rotate(rectangle(-line/2,line/2,-width/4,width/4),30),3*width/4,width/4)) shapes['Q'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = add(shape,rectangle(width-line,width,-height/3,width)) shapes['q'] = shape shape = rectangle(0,line,0,height) w = 2*height/3 shape = add(shape,circle(width-w/2,height-w/2,w/2)) shape = add(shape,rectangle(0,width-w/2,height-w,height)) shape = subtract(shape,circle(width-w/2,height-w/2,w/2-line)) shape = subtract(shape,rectangle(line,width-w/2,height-w+line,height-line)) leg = triangle(line,0,line,height,width,0) leg = subtract(leg,triangle(line,-2.0*line,line,height-2.0*line,width,-2.0*line)) leg = subtract(leg,rectangle(0,width,height/3,height)) shape = add(shape,leg) shapes['R'] = shape shape = circle(width,0,width) shape = subtract(shape,circle(width,0,width-line)) shape = subtract(shape,rectangle(.8*width,2*width,-height,height)) shape = subtract(shape,rectangle(0,2*width,-height,0)) shape = add(shape,rectangle(0,line,0,width)) shapes['r'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = subtract(shape,rectangle(0,width/2,width/2,width)) shape = add(shape,move(reflect_y(reflect_x(shape,width),width),0,width-line)) shape = scale_y(shape,0,height/(2*width-line)) shapes['S'] = shape w = width/3 shape = circle(w,w,w) shape = subtract(shape,circle(w,w,w-.9*line)) shape = subtract(shape,rectangle(0,w,w,2*w)) shape = add(shape,move(reflect_y(reflect_x(shape,2*w),2*w),0,2*w-.9*line)) shape = scale_y(shape,0,(2*height/3)/(4*w-.9*line)) shape = move(shape,(width/2)-w,0) shapes['s'] = shape shape = rectangle(width/2-line/2,width/2+line/2,0,height) shape = add(shape,rectangle(0,width,height-line,height)) shapes['T'] = shape shape = circle(0,3*width/8,3*width/8) shape = subtract(shape,circle(0,3*width/8,3*width/8-line)) shape = subtract(shape,rectangle(-width,width,3*width/8,height)) shape = subtract(shape,rectangle(0,width,-height,height)) shape = move(shape,width/2-line/2+3*width/8,0) shape = add(shape,rectangle(width/2-line/2,width/2+line/2,width/4,3*height/4)) shape = add(shape,rectangle(width/5,4*width/5,height/2-line/2,height/2+line/2)) shapes['t'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = subtract(shape,rectangle(0,width,width/2,height)) shape = add(shape,rectangle(0,line,width/2,height)) shape = add(shape,rectangle(width-line,width,width/2,height)) shapes['U'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = subtract(shape,rectangle(0,width,width/2,height)) shape = add(shape,rectangle(0,line,width/2,2*height/3)) shape = add(shape,rectangle(width-line,width,0,2*height/3)) shapes['u'] = shape shape = triangle(0,height,width,height,width/2,0) shape = subtract(shape,triangle(0,height+3*line,width,height+3*line,width/2,3*line)) shapes['V'] = shape w = 2*height/3.0 shape = triangle(0,w,width,w,width/2,0) shape = subtract(shape,triangle(0,w+2*line,width,w+2*line,width/2,2*line)) shapes['v'] = shape shape = triangle(0,height,width,height,width/2,0) shape = add(shape,move(shape,.6*width,0)) cutout = triangle(0,height+4*line,width,height+4*line,width/2,4*line) cutout = add(cutout,move(cutout,.6*width,0)) shape = subtract(shape,cutout) shape = scale_x(shape,0,1/1.6) shapes['W'] = shape shape = scale_y(shapes['W'],0,width/height) shapes['w'] = shape shape = rectangle(0,width,0,height) shape = subtract(shape,triangle(0,0,0,height,width/2-.7*line,height/2)) shape = subtract(shape,triangle(width,0,width/2+.7*line,height/2,width,height)) shape = subtract(shape,triangle(1.1*line,height,width-1.1*line,height,width/2,height/2+line)) shape = subtract(shape,triangle(1.1*line,0,width/2,height/2-line,width-1.1*line,0)) shapes['X'] = shape w = 2*height/3.0 shape = rectangle(0,width,0,w) shape = subtract(shape,triangle(0,0,0,w,width/2-.75*line,w/2)) shape = subtract(shape,triangle(width,0,width/2+.75*line,w/2,width,w)) shape = subtract(shape,triangle(1.25*line,0,width/2,w/2-.75*line,width-1.25*line,0)) shape = subtract(shape,triangle(1.25*line,w,width-1.25*line,w,width/2,w/2+.75*line)) shapes['x'] = shape w = height/2 shape = rectangle(0,width,w,height) shape = subtract(shape,triangle(0,w,0,height,width/2-line/2,w)) shape = subtract(shape,triangle(width/2+line/2,w,width,height,width,w)) shape = subtract(shape,triangle(1.1*line,height,width-1.1*line,height,width/2,w+1.1*line)) shape = add(shape,rectangle(width/2-line/2,width/2+line/2,0,w)) shapes['Y'] = shape shape = rectangle(0,width,-height/3,width) shape = subtract(shape,triangle(0,-height/3,0,width,width/2-.9*line,0)) shape = subtract(shape,triangle(1.1*line,width,width-1.1*line,width,width/2-.2*line,1.6*line)) shape = subtract(shape,triangle(1.2*line,-height/3,width,width,width,-height/3)) shapes['y'] = shape shape = rectangle(0,width,0,height) shape = subtract(shape,triangle(0,line,0,height-line,width-1.4*line,height-line)) shape = subtract(shape,triangle(1.4*line,line,width,height-line,width,line)) shapes['Z'] = shape w = 2*height/3 shape = rectangle(0,width,0,w) shape = subtract(shape,triangle(0,line,0,w-line,width-1.6*line,w-line)) shape = subtract(shape,triangle(width,line,1.6*line,line,width,w-line)) shapes['z'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-.9*line)) shape = scale_y(shape,0,height/width) shapes['0'] = shape shape = rectangle(width/2-line/2,width/2+line/2,0,height) w = width/2-line/2 cutout = circle(0,height,w) shape = add(shape,rectangle(0,width/2,height-w-line,height)) shape = subtract(shape,cutout) shape = move(shape,(width/2+line/2)/4,0) shapes['1'] = shape shape = circle(width/2,height-width/2,width/2) shape = subtract(shape,circle(width/2,height-width/2,width/2-line)) shape = subtract(shape,rectangle(0,width/2,0,height-width/2)) shape = add(shape,rectangle(0,width,0,height-width/2)) shape = subtract(shape,triangle(0,line,0,height-width/2,width-line,height-width/2)) shape = subtract(shape,triangle(1.5*line,line,width,height-width/2-.5*line,width,line)) shapes['2'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = scale_y(shape,0,(height/2+line/2)/width) shape = add(shape,move(shape,0,height/2-line/2)) shape = subtract(shape,rectangle(0,width/2,height/4,3*height/4)) shapes['3'] = shape shape = rectangle(width-line,width,0,height) shape = add(shape,triangle(0,height/3,width-line,height,width-line,height/3)) shape = subtract(shape,triangle(1.75*line,height/3+line,width-line,height-1.5*line,width-line,height/3+line)) shapes['4'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = subtract(shape,rectangle(0,width/2,width/2,width)) shape = add(shape,rectangle(0,width/2,width-line,width)) shape = add(shape,rectangle(0,line,width-line,height)) shape = add(shape,rectangle(0,width,height-line,height)) shapes['5'] = shape shape = circle(width/2,height-width/2,width/2) shape = subtract(shape,circle(width/2,height-width/2,width/2-line)) shape = subtract(shape,rectangle(0,width,0,height-width/2)) shape = subtract(shape,triangle(width,height,width,height/2,width/2,height/2)) shape = add(shape,circle(width/2,width/2,width/2)) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = add(shape,rectangle(0,line,width/2,height-width/2)) shapes['6'] = shape shape = rectangle(0,width,0,height) shape = subtract(shape,triangle(0,0,0,height-line,width-line,height-line)) shape = subtract(shape,triangle(line,0,width,height-line,width,0)) shapes['7'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = scale_y(shape,0,(height/2+line/2)/width) shape = add(shape,move(shape,0,height/2-line/2)) shapes['8'] = shape shape = circle(width/2,width/2,width/2) shape = subtract(shape,circle(width/2,width/2,width/2-line)) shape = subtract(shape,rectangle(0,width,width/2,height)) shape = subtract(shape,triangle(0,0,0,height/2,width/2,height/2)) shape = add(shape,circle(width/2,height-width/2,width/2)) shape = subtract(shape,circle(width/2,height-width/2,width/2-line)) shape = add(shape,rectangle(width-line,width,width/2,height-width/2)) shapes['9'] = shape w = width/2 shape = circle(w,w,w) shape = subtract(shape,circle(w,w,w-line)) shape = subtract(shape,rectangle(w,width,0,height)) shape = scale_y(shape,0,height/width) shape = move(shape,w/2,0) shapes['('] = shape shape = reflect_x(shape,width) shapes[')'] = shape shapes[' '] = false shape = rectangle(width/2-width/3,width/2+width/3,height/2-line/2,height/2+line/2) shape = add(shape,rectangle(width/2-line/2,width/2+line/2,height/2-width/3,height/2+width/3)) shapes['+'] = shape shape = rectangle(width/2-width/3,width/2+width/3,height/2-line/2,height/2+line/2) shapes['-'] = shape shape = circle(width/2,line,.75*line) shapes['.'] = shape shape = rectangle(0,width,0,height) d = .8*line shape = subtract(shape,triangle(d,0,width,height-d,width,0)) shape = subtract(shape,triangle(0,d,0,height,width-d,height)) shapes['/'] = shape # # to be done # shapes['~'] = shape shapes['!'] = shape shapes['@'] = shape shapes['#'] = shape shapes['$'] = shape shapes['%'] = shape shapes['^'] = shape shapes['&'] = shape shapes['&'] = shape shapes['_'] = shape shapes['='] = shape shapes['['] = shape shapes['{'] = shape shapes[']'] = shape shapes['}'] = shape shapes[';'] = shape shapes[':'] = shape shapes["'"] = shape shapes['"'] = shape shapes[','] = shape shapes['<'] = shape shapes['>'] = shape shapes['?'] = shape # # add a line to text shape # def addline(lineshape): # # LR align # if (align[0] == 'C'): lineshape = move(lineshape,-self.width/2.0,0) elif (align[0] == 'R'): lineshape = move(lineshape,-self.width,0) # # add # self.shape = add(self.shape,lineshape) # # loop over chars # dx = 0 dy = -height self.width = -space self.height = height lineshape = false self.shape = false count = 0 for chr in text: if (chr == '\n'): count += 1 addline(lineshape) dx = 0 dy -= 1.5*self.height/(1+(count-1)*1.5) self.width = -space self.height += 1.5*self.height lineshape = false else: lineshape = add(lineshape,move(shapes[chr],dx,dy)) self.width += space + width dx += width + space addline(lineshape) # # UD align # if (align[1] == 'C'): self.shape = move(self.shape,0,self.height/2.0) elif (align[1] == 'B'): self.shape = move(self.shape,0,self.height) # # rotate # if (angle == 90): self.shape = rotate_90(self.shape) elif (angle == 180): self.shape = rotate_180(self.shape) elif ((angle == 270) | (angle == -90)): self.shape = rotate_270(self.shape) elif (angle != 0): self.shape = rotate(self.shape,angle) # # translate # self.shape = move(self.shape,x,y) # # color # self.shape = '('+str(color)+'*(('+self.shape+')!=0))' ############################################################ # PCB classes and definitions ############################################################ class PCB: def __init__(self,x0,y0,width,height,mask): self.width = width self.height = height self.board = false self.labels = false self.interior = rectangle(x0,x0+width,y0,y0+height) self.exterior = subtract(true,rectangle(x0,x0+width,y0,y0+height)) self.mask = false self.holes = false self.cutout = false def add(self,part): self.board = add(self.board,part) self.mask = add(self.mask,move(part,-mask,mask)) self.mask = add(self.mask,move(part,-mask,-mask)) self.mask = add(self.mask,move(part,mask,mask)) self.mask = add(self.mask,move(part,mask,-mask)) return self def panel(self,pcb,dx,dy,dz=0): self.board = add(self.board,translate(pcb.board,dx,dy,dz)) self.interior = add(self.interior,translate(pcb.interior,dx,dy,dz)) self.exterior = intersect(self.exterior,translate(pcb.exterior,dx,dy,dz)) self.mask = add(self.mask,translate(pcb.mask,dx,dy,dz)) self.holes = add(self.holes,translate(pcb.holes,dx,dy,dz)) self.width = self.width+dx self.height = self.height+dy def text(self,str,x,y,line=0.01,color=White): self.labels = add(self.labels,text('pcb.py',x+.17,V3.y,line=line,color=color).shape) class point: def __init__(self,x,y,z=0): self.x = x self.y = y self.z = z class part: class text: def __init__(self,x,y,z=0,text='',line=0.006,angle=0): self.x = x self.y = y self.z = z self.text = text self.line = line self.angle = angle def add(self,pcb,x,y,z=0,angle=0,line=0.007): self.x = x self.y = y self.z = z self.angle = angle if (angle == 90): self.shape = rotate_90(self.shape) elif (angle == 180): self.shape = rotate_180(self.shape) elif ((angle == 270) | (angle == -90)): self.shape = rotate_270(self.shape) elif (angle != 0): self.shape = rotate(self.shape,angle) self.shape = translate(self.shape,x,y,z) if hasattr(self,'holes'): if (angle == 90): self.holes = rotate_90(self.holes) elif (angle == 180): self.holes = rotate_180(self.holes) elif ((angle == 270) | (angle == -90)): self.holes = rotate_270(self.holes) elif (angle != 0): self.holes = rotate(self.holes,angle) self.holes = translate(self.holes,x,y,z) if hasattr(self,'cutout'): if (angle == 90): self.cutout = rotate_90(self.cutout) elif (angle == 180): self.cutout = rotate_180(self.cutout) elif ((angle == 270) | (angle == -90)): self.cutout = rotate_270(self.cutout) elif (angle != 0): self.cutout = rotate(self.cutout,angle) self.cutout = translate(self.cutout,x,y,z) deg_angle = angle angle = math.pi*angle/180 for i in range(len(self.pad)): xnew = math.cos(angle)*self.pad[i].x - math.sin(angle)*self.pad[i].y ynew = math.sin(angle)*self.pad[i].x + math.cos(angle)*self.pad[i].y self.pad[i].x = x + xnew self.pad[i].y = y + ynew self.pad[i].z += z pcb.labels = add(pcb.labels,text(self.value,x,y,z,line=line,color=Green).shape) for i in range(len(self.labels)): xnew = math.cos(angle)*self.labels[i].x - math.sin(angle)*self.labels[i].y ynew = math.sin(angle)*self.labels[i].x + math.cos(angle)*self.labels[i].y self.labels[i].x = x + xnew self.labels[i].y = y + ynew self.labels[i].z += z if ((-90 < deg_angle) & (deg_angle <= 90)): pcb.labels = add(pcb.labels,text(self.labels[i].text,self.labels[i].x,self.labels[i].y,self.labels[i].z,self.labels[i].line,color=Red,angle=deg_angle-self.labels[i].angle).shape) else: pcb.labels = add(pcb.labels,text(self.labels[i].text,self.labels[i].x,self.labels[i].y,self.labels[i].z,self.labels[i].line,color=Red,angle=(deg_angle-self.labels[i].angle-180)).shape) pcb = pcb.add(self.shape) if hasattr(self,'holes'): pcb.holes = add(pcb.holes,self.holes) if hasattr(self,'cutout'): pcb.interior = subtract(pcb.interior,self.cutout) pcb.exterior = add(pcb.exterior,self.cutout) return pcb def wire(pcb,width,*points): x0 = points[0].x y0 = points[0].y z0 = points[0].z roundoff = 1e-6 pcb.board = add(pcb.board,cylinder(x0,y0,z0-roundoff,z0+roundoff,width/2)) for i in range(1,len(points)): x0 = points[i-1].x y0 = points[i-1].y z0 = points[i-1].z x1 = points[i].x y1 = points[i].y z1 = points[i].z pcb.board = add(pcb.board,line(x0,y0,x1,y1,z1,width)) pcb.board = add(pcb.board,cylinder(x1,y1,z1-roundoff,z1+roundoff,width/2)) return pcb def wirer(pcb,width,*points): for i in range(1,len(points)): x0 = points[i-1].x y0 = points[i-1].y z0 = points[i-1].z x1 = points[i].x y1 = points[i].y z1 = points[i].z if (x0 < x1): pcb.board = add(pcb.board,cube(x0-width/2,x1+width/2,y0-width/2,y0+width/2,z0,z0)) elif (x1 < x0): pcb.board = add(pcb.board,cube(x1-width/2,x0+width/2,y0-width/2,y0+width/2,z0,z0)) if (y0 < y1): pcb.board = add(pcb.board,cube(x1-width/2,x1+width/2,y0-width/2,y1+width/2,z0,z0)) elif (y1 < y0): pcb.board = add(pcb.board,cube(x1-width/2,x1+width/2,y1-width/2,y0+width/2,z0,z0)) return pcb ############################################################ # PCB library ############################################################ class via(part): # # via # def __init__(self,zb,zt,rv,rp,value=''): self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = cylinder(0,0,zb,zt,rp) self.holes = cylinder(0,0,zb,zt,rv) self.pad.append(point(0,0,zt)) self.pad.append(point(0,0,zb)) class SJ(part): # # solder jumper # def __init__(self,value=''): pad_SJ = cube(-.02,.02,-.03,.03,0,0) self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = translate(pad_SJ,-.029,0,0) self.pad.append(point(-.029,0,0)) self.shape = add(self.shape,translate(pad_SJ,.029,0,0)) self.pad.append(point(.029,0,0)) ############################################################ # discretes ############################################################ class ST4EB(part): # # Nidec Copal ST4ETB103 trimpot # def __init__(self,value=''): pad1 = cube(-.032,.032,-.039,.039,0,0) pad2 = cube(-.039,.039,-.039,.039,0,0) self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = translate(pad1,-.046,-.118,0) self.pad.append(point(-.046,-.118,0)) self.shape = add(self.shape,translate(pad1,.046,-.118,0)) self.pad.append(point(.046,-.118,0)) self.shape = add(self.shape,translate(pad2,0,.118,0)) self.pad.append(point(0,.118,0)) class C_FND(part): # # Panasonic FN series, size code D # 100uF: EEE-FN1E101UL # def __init__(self,value=''): pad = cube(-.032,.032,-.06,.06,0,0) self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = translate(pad,0,.11,0) self.pad.append(point(0,.11,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'+',angle=90)) self.shape = add(self.shape,translate(pad,0,-.11,0)) self.pad.append(point(0,-.11,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-',angle=90)) pad_0402 = cube(-.0175,.0175,-.014,.014,0,0) class R_0402(part): # # 0402 resistor # def __init__(self,value=''): self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = translate(pad_0402,-.0265,0,0) self.pad.append(point(-.0265,0,0)) self.shape = add(self.shape,translate(pad_0402,.0265,0,0)) self.pad.append(point(.0265,0,0)) pad_0602 = cube(-0.9/2/25.4,0.9/2/25.4,-0.6/2/25.4,0.6/2/25.4,0,0) class R_0603(part): # # 0603 resistor # def __init__(self,value=''): dy = (0.9/2+0.6/2)/25.4 self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = translate(pad_0402,0,-dy,0) self.pad.append(point(0,-dy,0)) self.shape = add(self.shape,translate(pad_0402,0,dy,0)) self.pad.append(point(0,dy,0)) pad_1206 = cube(-.032,.032,-.034,.034,0,0) class R_1206(part): # # 1206 resistor # def __init__(self,value=''): self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = translate(pad_1206,-.06,0,0) self.pad.append(point(-.06,0,0)) self.shape = add(self.shape,translate(pad_1206,.06,0,0)) self.pad.append(point(.06,0,0)) class C_1206(part): # # 1206 capacitor # def __init__(self,value=''): self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = translate(pad_1206,-.06,0,0) self.pad.append(point(-.06,0,0)) self.shape = add(self.shape,translate(pad_1206,.06,0,0)) self.pad.append(point(.06,0,0)) pad_1210 = cube(-.032,.032,-.048,.048,0,0) class L_1210(part): # # 1210 inductor # def __init__(self,value=''): self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = translate(pad_1210,-.06,0,0) self.pad.append(point(-.06,0,0)) self.shape = add(self.shape,translate(pad_1210,.06,0,0)) self.pad.append(point(.06,0,0)) pad_choke = cube(-.06,.06,-.06,.06,0,0) class choke(part): # # Panasonic ELLCTV # def __init__(self,value=''): self.value = value self.labels = [] self.pad = [point(0,0,0)] self.shape = translate(pad_choke,-.177,-.177,0) self.pad.append(point(-.177,-.177,0)) self.shape = add(self.shape,translate(pad_choke,.177,.177,0)) self.pad.append(point(.177,.177,0)) ############################################################ # connectors ############################################################ class SMD_wire_entry(part): # # SMD wire entry # Metz Connect SM99S01VBNN05G7 # def __init__(self,value=''): pad1 = cube(-.199/2,.169/2,-.079/2,.079/2,0,0) l1 = .169 pad2 = cube(-.228/2,.258/2,-.079/2,.079/2,0,0) l2 = .228 gap = .106 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad1,-gap/2-l1/2,0,0) self.pad.append(point(-gap/2-l1/2,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad2,gap/2+l2/2,0,0)) self.pad.append(point(gap/2+l2/2,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) class hole_pad(part): # # wire solder hole pad # def __init__(self,value,zb,zt): pad_header = cylinder(0,0,zb,zt,.03) pad_hole = cylinder(0,0,zb,zt,.018) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,0,0) self.holes = translate(pad_hole,0,0,0) self.pad.append(point(0,0,0)) class header_I2C_hole(part): # # I2C through-hole # def __init__(self,value,zb,zt): pad_header = cylinder(0,0,zb,zt,.04) pad_hole = cylinder(0,0,zb,zt,.018) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.15,0) self.holes = translate(pad_hole,0,.15,0) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.holes = add(self.holes,translate(pad_hole,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.holes = add(self.holes,translate(pad_hole,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.15,0)) self.pad.append(point(0,-0.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class FFC_4x1(part): # # 4 x 1mm flat flex connector # GCT 2073-FFC3B11-04-TCT-ND # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] w = 0.6/25.4/2 # pad half width h = 1.7/25.4/2 # pad half height p = 1/25.4 # pad pitch y = (3.55-1.35/2)/25.4 # pad y l = 0.006 # text pad = cube(-w,w,-h,h,0,0) aw = 2.5/25.4/2 # anchor half width ah = 2.8/25.4/2 # anchor half height ax = p*(3/2)+2.75/25.4 # anchor x ay = ((1.7/2)-1.9-2.8/2)/25.4 # anchor y anchor = cube(-aw,aw,-ah,ah,0,0) # # pin 1 # self.shape = translate(pad,-p*3/2,0,0) self.pad.append(point(-p*3/2,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad,-p*1/2,0,0)) self.pad.append(point(-p*1/2,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) # # pin 3 # self.shape = add(self.shape,translate(pad,p*1/2,0,0)) self.pad.append(point(p*1/2,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3')) # # pin 4 # self.shape = add(self.shape,translate(pad,p*3/2,0,0)) self.pad.append(point(p*3/2,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'4')) # # anchors # self.shape = add(self.shape,translate(anchor,-ax,ay,0)) self.shape = add(self.shape,translate(anchor,ax,ay,0)) class IMU_6050(part): # # MPU-6050 IMU breakout through-hole # def __init__(self,value,zb,zt): pad_header = cylinder(0,0,zb,zt,.04) pad_hole = cylinder(0,0,zb,zt,.018) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.35,0) self.holes = translate(pad_hole,0,.35,0) self.pad.append(point(0,.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.25,0)) self.holes = add(self.holes,translate(pad_hole,0,.25,0)) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.holes = add(self.holes,translate(pad_hole,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,0.05,0)) self.holes = add(self.holes,translate(pad_hole,0,0.05,0)) self.pad.append(point(0,0.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-0.05,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.05,0)) self.pad.append(point(0,-0.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'XDA')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.15,0)) self.pad.append(point(0,-0.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'XCL')) # # pin 7 # self.shape = add(self.shape,translate(pad_header,0,-0.25,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.25,0)) self.pad.append(point(0,-0.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'AD0')) # # pin 8 # self.shape = add(self.shape,translate(pad_header,0,-0.35,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.35,0)) self.pad.append(point(0,-0.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'INT')) class IMU_4754(part): # # Adafruit 4754 IMU breakout through-hole # def __init__(self,value,zb,zt): pad_header = cylinder(0,0,zb,zt,.04) pad_hole = cylinder(0,0,zb,zt,.018) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.25,0) self.holes = translate(pad_hole,0,.25,0) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vin')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.holes = add(self.holes,translate(pad_hole,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3.3')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.holes = add(self.holes,translate(pad_hole,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.05,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.05,0)) self.pad.append(point(0,-0.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.15,0)) self.pad.append(point(0,-0.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-0.25,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.25,0)) self.pad.append(point(0,-0.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'INT')) # width = 0.982 height = 0.873 offset = 0.1 size = 0.05 self.shape = add(self.shape,cube(-offset,-offset+size,width/2-size,width/2,0,0)) self.shape = add(self.shape,cube(height-offset-size,height-offset,width/2-size,width/2,0,0)) self.shape = add(self.shape,cube(-offset,-offset+size,-width/2,-width/2+size,0,0)) self.shape = add(self.shape,cube(height-offset-size,height-offset,-width/2,-width/2+size,0,0)) class header_IMU_3463_hole(part): # # Adafruit 3463 IMU breakout through-hole # def __init__(self,value,zb,zt): pad_header = cylinder(0,0,zb,zt,.03) pad_hole = cylinder(0,0,zb,zt,.018) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.25,0) self.holes = translate(pad_hole,0,.25,0) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vin')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.holes = add(self.holes,translate(pad_hole,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3.3')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.holes = add(self.holes,translate(pad_hole,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.05,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.05,0)) self.pad.append(point(0,-0.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.15,0)) self.pad.append(point(0,-0.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-0.25,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.25,0)) self.pad.append(point(0,-0.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) class header_IMU_3463(part): # # Adafruit 3463 IMU breakout # def __init__(self,value=''): pad_header = cylinder(0,0,0,0,.03) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.25,0) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vin')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3.3')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.05,0)) self.pad.append(point(0,-0.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.pad.append(point(0,-0.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-0.25,0)) self.pad.append(point(0,-0.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) class header_IMU_2472(part): # # Adafruit 2472 BNO055 IMU breakout # def __init__(self,value=''): pad_header = cylinder(0,0,0,0,.03) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.25,0) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vin')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3.3')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.05,0)) self.pad.append(point(0,-0.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.pad.append(point(0,-0.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-0.25,0)) self.pad.append(point(0,-0.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) class USB_micro_Elektronik(part): # # micro USB # Elektronik 629105136821 # def __init__(self,value='',zb=-0.06,zt=0): w = 0.0049 # pad half width h = 1.35/25.4/2 # pad half height p = 1.3/25.4/2 # pad pitch y = (3.55-1.35/2)/25.4 # pad y l = 0.006 # text pad_header = cube(-w,w,-h,h,0,0) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,-2*p,y,0) self.pad.append(point(-2*p,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V',line=l)) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-p,y,0)) self.pad.append(point(-p,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-',line=l)) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,y,0)) self.pad.append(point(0,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'+',line=l)) # # pin 4 # self.shape = add(self.shape,translate(pad_header,p,y,0)) self.pad.append(point(p,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'I',line=l)) # # pin 5 # self.shape = add(self.shape,translate(pad_header,2*p,y,0)) self.pad.append(point(2*p,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=l)) # # feet # x = (9.8+6.2)/2/25.4/2 w = (9.8-6.2)/25.4/2/2 h = 1.9/25.4/2 pad_feet = cube(-w,w,-h,h,0,0) self.shape = add(self.shape,translate(pad_feet,-x,0,0)) self.shape = add(self.shape,translate(pad_feet,x,0,0)) # # holes # y = 2.45/25.4 x = 4.15/2/25.4 self.holes = cylinder(-x,y,zb,zt,0.017) self.holes = add(self.holes,cylinder(x,y,zb,zt,0.017)) class USB_micro_AMP(part): # # micro USB # AMP/FCI 10118194-0001LF # def __init__(self,value='',zb=-0.06,zt=0): w = 0.0049 # pad half width h = .55/25.4/2 # pad half height p = .65/25.4 # pad pitch l = 0.006 # text pad_header = cube(-w,w,-h,h,0,0) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,-2*p,0,0) self.pad.append(point(-2*p,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V',line=l)) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-p,0,0)) self.pad.append(point(-p,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-',line=l)) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,0,0)) self.pad.append(point(0,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'+',line=l)) # # pin 4 # self.shape = add(self.shape,translate(pad_header,p,0,0)) self.pad.append(point(p,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'I',line=l)) # # pin 5 # self.shape = add(self.shape,translate(pad_header,2*p,0,0)) self.pad.append(point(2*p,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=l)) # # holes # self.holes = cylinder(2.5/25.4,0,zb,zt,0.016) self.holes = add(self.holes,cylinder(-2.5/25.4,0,zb,zt,0.016)) self.holes = add(self.holes,cylinder(-3.5/25.4,-2.7/25.4,zb,zt,.9/25.4/2)) self.shape= add(self.shape,cylinder(-3.5/25.4,-2.7/25.4,zb,zt,2/25.4/2)) self.holes = add(self.holes,cylinder(3.5/25.4,-2.7/25.4,zb,zt,.9/25.4/2)) self.shape= add(self.shape,cylinder(3.5/25.4,-2.7/25.4,zb,zt,2/25.4/2)) class USB_micro_AMP_nopad(part): # # micro USB, no pad # AMP/FCI 10118194-0001LF # def __init__(self,value='',zb=-0.06,zt=0): w = 0.0049 # pad half width h = .55/25.4/2 # pad half height p = .65/25.4 # pad pitch l = 0.006 # text pad_header = cube(-w,w,-h,h,0,0) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,-2*p,0,0) self.pad.append(point(-2*p,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V',line=l)) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-p,0,0)) self.pad.append(point(-p,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-',line=l)) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,0,0)) self.pad.append(point(0,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'+',line=l)) # # pin 4 # self.shape = add(self.shape,translate(pad_header,p,0,0)) self.pad.append(point(p,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'I',line=l)) # # pin 5 # self.shape = add(self.shape,translate(pad_header,2*p,0,0)) self.pad.append(point(2*p,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=l)) # # holes # self.holes = cylinder(2.5/25.4,0,zb,zt,0.016) self.holes = add(self.holes,cylinder(-2.5/25.4,0,zb,zt,0.016)) self.holes = add(self.holes,cylinder(-3.5/25.4,-2.7/25.4,zb,zt,.9/25.4/2)) self.holes = add(self.holes,cylinder(3.5/25.4,-2.7/25.4,zb,zt,.9/25.4/2)) class header_IMU_2738(part): # # Pololu 2736 MinIMU-9 v5 IMU # def __init__(self,value=''): pad_header = cylinder(0,0,0,0,.03) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.2,0) self.pad.append(point(0,.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1SCL')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.1,0)) self.pad.append(point(0,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.0,0)) self.pad.append(point(0,.0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.1,0)) self.pad.append(point(0,-0.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIN')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-0.2,0)) self.pad.append(point(0,-0.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD')) class header_serial_M(part): # # 4x1x0.1 serial cable header # Sullins GEC36SBSN-M89 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.15,0) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.Rx')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'5V')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) class header_serial_Frev(part): # # 4x1x0.1 serial cable header # Sullins GEC36SBSN-M89 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.15,0) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.G')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'5V')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) class header_serial_F(part): # # 4x1x0.1 serial cable header # Sullins GEC36SBSN-M89 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.15,0) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.G')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'5V')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) class header_2H(part): # # 2x1x0.1 cable header # Sullins GEC36SBSN-M89 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.05,0) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) class header_3H(part): # # 3x1x0.1 cable header # Sullins GEC36SBSN-M89 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.1,0) self.pad.append(point(0,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,0,0)) self.pad.append(point(0,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3')) class header_4H(part): # # 4x1x0.1 cable header # Sullins GEC36SBSN-M89 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.15,0) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'4')) class header_NEO_6M(part): # # NEO_6M GPS module # def __init__(self,value=''): pad_header = cylinder(0,0,0,0,.03) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.2,0) self.pad.append(point(0,.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PPS')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.1,0)) self.pad.append(point(0,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TXD')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,0,0)) self.pad.append(point(0,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RXD')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-.2,0)) self.pad.append(point(0,-.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) class header_MFRC522(part): # # MFCR522 RFID module # def __init__(self,value=''): pad_header = cylinder(0,0,0,0,.03) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.35,0) self.pad.append(point(0,.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1SDA')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.25,0)) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'COPI')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,0.05,0)) self.pad.append(point(0,0.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CIPO')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IRQ')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 7 # self.shape = add(self.shape,translate(pad_header,0,-.25,0)) self.pad.append(point(0,-.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 8 # self.shape = add(self.shape,translate(pad_header,0,-.35,0)) self.pad.append(point(0,-.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3.3V')) class header_LSM6DS33_2736(part): # # LSD6DS33 carrier # Pololu 2736 # def __init__(self,value=''): pad_header = cylinder(0,0,0,0,.03) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.4,0) self.pad.append(point(0,.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1VDD')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.3,0)) self.pad.append(point(0,.3,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIN')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.2,0)) self.pad.append(point(0,.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,0.1,0)) self.pad.append(point(0,0.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,0,0)) self.pad.append(point(0,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDO')) # # pin 7 # self.shape = add(self.shape,translate(pad_header,0,-.2,0)) self.pad.append(point(0,-.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CS')) # # pin 8 # self.shape = add(self.shape,translate(pad_header,0,-.3,0)) self.pad.append(point(0,-.3,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'INT2')) # # pin 9 # self.shape = add(self.shape,translate(pad_header,0,-.4,0)) self.pad.append(point(0,-.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'INT1')) class header_VL53L1X_3415(part): # # VL53L1X carrier # Pololu 3415 # def __init__(self,value=''): pad_header = cylinder(0,0,0,0,.03) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.3,0) self.pad.append(point(0,.3,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1VDD')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.2,0)) self.pad.append(point(0,.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIN')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.1,0)) self.pad.append(point(0,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,0,0)) self.pad.append(point(0,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-.2,0)) self.pad.append(point(0,-.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'XSHUT')) # # pin 7 # self.shape = add(self.shape,translate(pad_header,0,-.3,0)) self.pad.append(point(0,-.3,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO1')) class ESP_WROOM_02D(part): # # ESP-WROOM-02D # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] pad = cube(-1/25.4,1/25.4,-.45/25.4,.45/25.4,0,0) width = 17.5/25.4 pitch = 1.5/25.4 # # pin 1 # self.shape = translate(pad,-width/2,4*pitch,0) self.shape = add(self.shape,cylinder(-width/2-.75/25.4,4*pitch,0,0,.45/25.4)) self.pad.append(point(-width/2,4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3V3')) # # pin 2 # self.shape = add(self.shape,translate(pad,-width/2,3*pitch,0)) self.pad.append(point(-width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'EN')) # # pin 3 # self.shape = add(self.shape,translate(pad,-width/2,2*pitch,0)) self.pad.append(point(-width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO14')) # # pin 4 # self.shape = add(self.shape,translate(pad,-width/2,1*pitch,0)) self.pad.append(point(-width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO12')) # # pin 5 # self.shape = add(self.shape,translate(pad,-width/2,0*pitch,0)) self.pad.append(point(-width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO13')) # # pin 6 # self.shape = add(self.shape,translate(pad,-width/2,-1*pitch,0)) self.pad.append(point(-width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO15')) # # pin 7 # self.shape = add(self.shape,translate(pad,-width/2,-2*pitch,0)) self.pad.append(point(-width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO2')) # # pin 8 # self.shape = add(self.shape,translate(pad,-width/2,-3*pitch,0)) self.pad.append(point(-width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO0')) # # pin 9 # self.shape = add(self.shape,translate(pad,-width/2,-4*pitch,0)) self.pad.append(point(-width/2,-4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 10 # self.shape = add(self.shape,translate(pad,width/2,-4*pitch,0)) self.pad.append(point(width/2,-4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO4')) # # pin 11 # self.shape = add(self.shape,translate(pad,width/2,-3*pitch,0)) self.pad.append(point(width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RXD')) # # pin 12 # self.shape = add(self.shape,translate(pad,width/2,-2*pitch,0)) self.pad.append(point(width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TXD')) # # pin 13 # self.shape = add(self.shape,translate(pad,width/2,-1*pitch,0)) self.pad.append(point(width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 14 # self.shape = add(self.shape,translate(pad,width/2,0*pitch,0)) self.pad.append(point(width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO5')) # # pin 15 # self.shape = add(self.shape,translate(pad,width/2,1*pitch,0)) self.pad.append(point(width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 16 # self.shape = add(self.shape,translate(pad,width/2,2*pitch,0)) self.pad.append(point(width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TOUT')) # # pin 17 # self.shape = add(self.shape,translate(pad,width/2,3*pitch,0)) self.pad.append(point(width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO16')) # # pin 18 # self.shape = add(self.shape,translate(pad,width/2,4*pitch,0)) self.pad.append(point(width/2,4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 19 # padg = cube(-2/25.4,2/25.4,-2/25.4,2/25.4,0,0) self.shape = add(self.shape,translate(padg,(1.5/2+7.1+2-17.5/2)/25.4,(4*1.5+7.1-20+4.29+2)/25.4,0)) self.pad.append(point((1.5/2+7.1+2-17.5/2)/25.4,(4*1.5+7.1-20+4.29+2)/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class ESP_01(part): # # ESP-01 4x2 vertical # Sullins NPTC042KFMS-RC # def __init__(self,value=''): pad_header = cube(-.075/2,.075/2,-.04/2,.04/2,0,0) d = .305/2-.07/2 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,d,.15,0) self.shape = add(self.shape,cylinder(d+.061/2,.15,0,0,.039/2)) self.pad.append(point(d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-d,.15,0)) self.pad.append(point(-d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,d,.05,0)) self.pad.append(point(d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO2')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,-d,.05,0)) self.pad.append(point(-d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'EN')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,d,-.05,0)) self.pad.append(point(d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO0')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,-d,-.05,0)) self.pad.append(point(-d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 7 # self.shape = add(self.shape,translate(pad_header,d,-.15,0)) self.pad.append(point(d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) # # pin 8 # self.shape = add(self.shape,translate(pad_header,-d,-.15,0)) self.pad.append(point(-d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) class header_serial_reverse_5V(part): # # serial cable header, reverse for female connector, 5V output # GCT BG300-06-A-L-A # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,-.25,0) self.shape = add(self.shape,cylinder(-.05,-.25,0,0,.025)) self.pad.append(point(0,-.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,-.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CTS')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'5V')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,0.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,.25,0)) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RTS')) class header_serial_reverse_3V3(part): # # serial cable header, reverse for female connector, 3.3V output # GCT BG300-06-A-L-A # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,-.25,0) self.shape = add(self.shape,cylinder(-.05,-.25,0,0,.025)) self.pad.append(point(0,-.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,-.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CTS')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3.3V')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,0.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,.25,0)) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RTS')) class TFT8x1v(part): # # TFT 8x1 vertical # 2x Sullins S5635-ND # def __init__(self,value=''): pad_header = cube(-.079/2,.079/2,-.039/2,.039/2,0,0) d = .209/2-.079/2 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,-d,-.35,0) self.pad.append(point(-d,-.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1LED')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,d,-.25,0)) self.pad.append(point(d,-.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,-d,-.15,0)) self.pad.append(point(-d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MOSI')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,d,-.05,0)) self.pad.append(point(d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DC')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,-d,.05,0)) self.pad.append(point(-d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,d,.15,0)) self.pad.append(point(d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CS')) # # pin 7 # self.shape = add(self.shape,translate(pad_header,-d,.25,0)) self.pad.append(point(-d,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 8 # self.shape = add(self.shape,translate(pad_header,d,.35,0)) self.pad.append(point(d,.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) class header_SWD_4_05(part): # # 4-pin header # Sullins GRPB022VWQS-RC 2x2x0.05" # def __init__(self,value=''): pad_header = cube(-.043,.043,-.015,.015,0,0) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,-.072,.025,0) self.shape = add(self.shape,cylinder(-.116,.025,0,0,.015)) self.pad.append(point(-.072,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CLK')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,.072,.025,0)) self.pad.append(point(.072,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIO')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,-.072,-.025,0)) self.pad.append(point(-.072,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,.072,-.025,0)) self.pad.append(point(.072,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class header_SWD_4_1(part): # # 4-pin header # FCI 95278-101a04lf Bergstik 2x2x0.1" # pad_header = cube(-.05,.05,-.025,.025,0,0) def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,-.107,.05,0) #self.shape = add(self.shape,cylinder(-.157,.05,0,0,.025)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.CLK')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIO')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,.107,-.05,0)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class header_UPDI(part): # # UPDI header # Sullins GEC36SBSN-M89 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: UPDI # self.shape = translate(pad_header,0,-.05,0) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'UPDI')) # # pin 2: GND # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class header_UPDI_reverse(part): # # UPDI header, reverse for female connector # GCT BG300-03-A-L-A # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: UPDI # self.shape = translate(pad_header,0,.05,0) self.shape = add(self.shape,cylinder(.05,.05,0,0,.025)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'UPDI')) # # pin 2: GND # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class USB_A_plug(part): # # USB type A PCB plug # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: 5V # self.shape = translate(cube(-.05,.242,-.02,.02,0,0),0,.138,0) self.pad.append(point(0,.138,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'5V')) # # pin 2: D- # self.shape = add(self.shape,translate(cube(-0.05,.202,-.02,.02,0,0),0,.039,0)) self.pad.append(point(0,.039,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'D-')) # # pin 3: D+ # self.shape = add(self.shape,translate(cube(-.05,.202,-.02,.02,0,0),0,-.039,0)) self.pad.append(point(0,-.039,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'D+')) # # pin 4: GND # self.shape = add(self.shape,translate(cube(-.05,.242,-.02,.02,0,0),0,-.138,0)) self.pad.append(point(0,-.138,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # plug cutout # self.cutout = cube(-.05,1,.24,10,zb,zt) self.cutout = add(self.cutout,cube(-.05,10,-10,-.24,zb,zt)) class header_SWD(part): # # Serial Wire Debug programming header # Amphenol 20021121-00010T1LF 2x5x0.05 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 0.077 w = 0.015 h = .047 pad = cube(-h,h,-w,w,0,0) # # pin 1: VCC # self.shape = translate(pad,d,-.1,0) self.shape = add(self.shape,cylinder(d+h,-.1,0,0,w)) self.pad.append(point(d,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 2: DIO # self.shape = add(self.shape,translate(pad,-d,-.1,0)) self.pad.append(point(-d,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIO')) # # pin 3: GND # self.shape = add(self.shape,translate(pad,d,-.05,0)) self.pad.append(point(d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4: CLK # self.shape = add(self.shape,translate(pad,-d,-.05,0)) self.pad.append(point(-d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CLK')) # # pin 5: GND # self.shape = add(self.shape,translate(pad,d,0,0)) self.pad.append(point(d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 6: SWO # self.shape = add(self.shape,translate(pad,-d,0,0)) self.pad.append(point(-d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SWO')) # # pin 7: KEY # self.shape = add(self.shape,translate(pad,d,.05,0)) self.pad.append(point(d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'KEY')) # # pin 8: NC # self.shape = add(self.shape,translate(pad,-d,.05,0)) self.pad.append(point(-d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC')) # # pin 9: GND # self.shape = add(self.shape,translate(pad,d,.1,0)) self.pad.append(point(d,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 10: nRESET # self.shape = add(self.shape,translate(pad,-d,.1,0)) self.pad.append(point(-d,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) class ESC(part): # # ESC 3x1 # Sullins S1013E-36-ND # def __init__(self,value=''): pad_header = cube(-.1,.1,-.05/2,.05/2,0,0) d = .075 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: PWM # self.shape = translate(pad_header,-d,-.1,0) self.pad.append(point(-d,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PWM')) # # pin 2: 5V # self.shape = add(self.shape,translate(pad_header,d,0,0)) self.pad.append(point(d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'5V')) # # pin 3: GND # self.shape = add(self.shape,translate(pad_header,-d,.1,0)) self.pad.append(point(-d,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class I2C4x1h(part): # # I2C 4x1 horizontal female # GCT BG300-03-A-L-A # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: SCL # self.shape = translate(pad_header,0,-.15,0) #self.shape = cylinder(.05,.15,0,0,.025) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 2: SDA # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 3: VCC # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 4: GND # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class I2C4x1v(part): # # I2C 4x1 vertical # Sullins S5635-ND # def __init__(self,value=''): pad_header = cube(-.079/2,.079/2,-.039/2,.039/2,0,0) d = .209/2-.079/2 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: VCC # self.shape = translate(pad_header,-d,-.15,0) self.pad.append(point(-d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1VCC')) # # pin 2: GND # self.shape = add(self.shape,translate(pad_header,d,-.05,0)) self.pad.append(point(d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 3: SCL # self.shape = add(self.shape,translate(pad_header,-d,.05,0)) self.pad.append(point(-d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 4: SDA # self.shape = add(self.shape,translate(pad_header,d,.15,0)) self.pad.append(point(d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) class I2C4x1i(part): # # I2C 4x1 inline # def __init__(self,value=''): pad_header = cube(-.079/2,.079/2,-.039/2,.039/2,0,0) d = 0 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: VCC # self.shape = translate(pad_header,-d,-.15,0) self.pad.append(point(-d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1VCC')) # # pin 2: GND # self.shape = add(self.shape,translate(pad_header,d,-.05,0)) self.pad.append(point(d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 3: SCL # self.shape = add(self.shape,translate(pad_header,-d,.05,0)) self.pad.append(point(-d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 4: SDA # self.shape = add(self.shape,translate(pad_header,d,.15,0)) self.pad.append(point(d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) class RCWL0516(part): # # RCWL-0516 Doppler radar # def __init__(self,value=''): pad_header = cube(-.065,.065,-.025,.025,0,0) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: 3.3V # self.shape = translate(pad_header,.107,-.2,0) self.shape = add(self.shape,cylinder(.172,-.2,0,0,.025)) self.pad.append(point(.107,-.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3.3V')) # # pin 2: GND # self.shape = add(self.shape,translate(pad_header,-.107,-.1,0)) self.pad.append(point(-.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 3: OUT # self.shape = add(self.shape,translate(pad_header,.107,0,0)) self.pad.append(point(.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'OUT')) # # pin 4: VIN # self.shape = add(self.shape,translate(pad_header,-.107,.1,0)) self.pad.append(point(-.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIN')) # # pin 5: CDS # self.shape = add(self.shape,translate(pad_header,.107,.2,0)) self.pad.append(point(.107,.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CDS')) class microSD(part): # # microSD # Amphenol 114-00841-68 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(cube(-.0138,.0138,-.034,.034,0,0),-.177+7*.0433,-.304,0) self.pad.append(point(-.177+7*.0433,-.304,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.NC',angle=90)) # # pin 2 # self.shape = add(self.shape,translate(cube(-.0138,.0138,-.034,.034,0,0),-.177+6*.0433,-.304,0)) self.pad.append(point(-.177+6*.0433,-.304,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CS',angle=90)) # # pin 3 # self.shape = add(self.shape,translate(cube(-.0138,.0138,-.034,.034,0,0),-.177+5*.0433,-.304,0)) self.pad.append(point(-.177+5*.0433,-.304,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDI',angle=90)) # # pin 4 # self.shape = add(self.shape,translate(cube(-.0138,.0138,-.034,.034,0,0),-.177+4*.0433,-.304,0)) self.pad.append(point(-.177+4*.0433,-.304,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC',angle=90)) # # pin 5 # self.shape = add(self.shape,translate(cube(-.0138,.0138,-.034,.034,0,0),-.177+3*.0433,-.304,0)) self.pad.append(point(-.177+3*.0433,-.304,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK',angle=90)) # # pin 6 # self.shape = add(self.shape,translate(cube(-.0138,.0138,-.034,.034,0,0),-.177+2*.0433,-.304,0)) self.pad.append(point(-.177+2*.0433,-.304,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',angle=90)) # # pin 7 # self.shape = add(self.shape,translate(cube(-.0138,.0138,-.034,.034,0,0),-.177+1*.0433,-.304,0)) self.pad.append(point(-.177+1*.0433,-.304,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDO',angle=90)) # # pin 8 # self.shape = add(self.shape,translate(cube(-.0138,.0138,-.034,.034,0,0),-.177+0*.0433,-.304,0)) self.pad.append(point(-.177+0*.0433,-.304,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC',angle=90)) # # feet # self.shape = add(self.shape,translate(cube(-.021,.021,-.029,.029,0,0),-.228,-.299,0)) # leave extra space for 1/64 milling self.shape = add(self.shape,translate(cube(-.029,.029,-.029,.029,0,0),.222,-.299,0)) self.shape = add(self.shape,translate(cube(-.015,.015,-.029,.025,0,0),-.232,0,0)) # leave extra space for 1/64 milling self.shape = add(self.shape,translate(cube(-.015,.015,-.029,.029,0,0),-.232+.47,.025,0)) self.shape = add(self.shape,translate(cube(-.028,.028,-.019,.019,0,0),-.221,.059,0)) self.shape = add(self.shape,translate(cube(-.019,.019,-.030,.030,0,0),.222,.121,0)) class USB_mini_CUI(part): # # USB mini # CUI UJ2-MBH-1-SMT-TR # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] p = 0.8/25.4 # pad pitch h = 2.5/25.4/2 # pad half height w = 0.0075 # pad half width y = 5.48/25.4 # pad position pad = cube(-w,w,-h,h,0,0) l = 0.006 # text # # pin 1 # self.shape = translate(pad,-2*p,y,0) self.pad.append(point(-2*p,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V',line=l)) # # pin 2 # self.shape = add(self.shape,translate(pad,-p,y,0)) self.pad.append(point(-p,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-',line=l)) # # pin 3 # self.shape = add(self.shape,translate(pad,0,y,0)) self.pad.append(point(0,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'+',line=l)) # # pin 4 # self.shape = add(self.shape,translate(pad,p,y,0)) self.pad.append(point(p,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'I',line=l)) # # pin 5 # self.shape = add(self.shape,translate(pad,2*p,y,0)) self.pad.append(point(2*p,y,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=l)) # # feet # w = 2/25.4/2 h = 2.5/25.4/2 x = (7.72/2+2/2)/25.4 pad = cube(-w,w,-h,h,0,0) self.shape = add(self.shape,translate(pad,-x,0,0)) self.shape = add(self.shape,translate(pad,x,0,0)) self.shape = add(self.shape,translate(pad,-x,y,0)) self.shape = add(self.shape,translate(pad,x,y,0)) # # holes # y = (5.94-2.97)/25.4 x = 4.4/2/25.4 self.holes = cylinder(-x,0,zb,zt,0.016) self.holes = add(self.holes,cylinder(x,0,zb,zt,0.017)) self.holes = cylinder(-x,y,zb,zt,0.016) self.holes = add(self.holes,cylinder(x,y,zb,zt,0.017)) class USB_mini_Hirose(part): # # USB mini B # Hirose UX60-MB-5ST # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] pad_USB_trace = cube(-.0075,.0075,-.04,.04,0,0) pad_USB_feet = cube(-.049,.049,-.043,.043,0,0) # # pin 1 # self.shape = translate(pad_USB_trace,-.063,.36,0) self.pad.append(point(-.063,.36,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # pin 2 # self.shape = add(self.shape,translate(pad_USB_trace,-.0315,.36,0)) self.pad.append(point(-.0315,.36,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-')) # # pin 3 # self.shape = add(self.shape,translate(pad_USB_trace,0,.36,0)) self.pad.append(point(0,.36,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'+')) # # pin 4 # self.shape = add(self.shape,translate(pad_USB_trace,.0315,.36,0)) self.pad.append(point(.0315,.36,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pin 5 # self.shape = add(self.shape,translate(pad_USB_trace,.063,.36,0)) self.pad.append(point(.063,.36,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) # # feet # self.shape = add(self.shape,translate(pad_USB_feet,.165,.33,0)) self.shape = add(self.shape,translate(pad_USB_feet,-.165,.33,0)) self.shape = add(self.shape,translate(pad_USB_feet,.165,.12,0)) self.shape = add(self.shape,translate(pad_USB_feet,-.165,.12,0)) pad_header = cube(-.05,.05,-.025,.025,0,0) class header_4(part): # # 4-pin header # fci 95278-101a04lf bergstik 2x2x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,-.107,.05,0) self.shape = add(self.shape,cylinder(-.157,.05,0,0,.025)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,.107,-.05,0)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'4')) class header_signal(part): # # signal header # FCI 95278-101A04LF Bergstik 2x2x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Gnd # self.shape = translate(pad_header,.107,-.05,0) self.shape = add(self.shape,cylinder(.157,-.05,0,0,.025)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pin 3: signal # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'signal')) # # pin 4: # self.shape = add(self.shape,translate(pad_header,-.107,.05,0)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) class header_power(part): # # power header # FCI 95278-101A04LF Bergstik 2x2x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Gnd # self.shape = translate(pad_header,.107,-.05,0) self.shape = add(self.shape,cylinder(.157,-.05,0,0,.025)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pin 3: V # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # pin 4: # self.shape = add(self.shape,translate(pad_header,-.107,.05,0)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) class header_i0(part): # # i0 header # FCI 95278-101A04LF Bergstik 2x2x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Gnd # self.shape = translate(pad_header,.107,-.05,0) self.shape = add(self.shape,cylinder(.157,-.05,0,0,.025)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2: data # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'data')) # # pin 3: V # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # pin 4: # self.shape = add(self.shape,translate(pad_header,-.107,.05,0)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) class header_serial(part): # # serial comm header # FCI 95278-101A04LF Bergstik 2x2x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Gnd # self.shape = translate(pad_header,.107,-.05,0) self.shape = add(self.shape,cylinder(.157,-.05,0,0,.025)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2:DTR # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DTR')) # # pin 3: Tx # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 4: Rx # self.shape = add(self.shape,translate(pad_header,-.107,.05,0)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) class header_bus(part): # # bus header # FCI 95278-101A04LF Bergstik 2x2x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Gnd # self.shape = translate(pad_header,.107,-.05,0) self.shape = add(self.shape,cylinder(.157,-.05,0,0,.025)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2: Tx # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 3: V # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # pin 4: Rx # self.shape = add(self.shape,translate(pad_header,-.107,.05,0)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) class header_I2C(part): # # I2C header # FCI 95278-101A04LF Bergstik 2x2x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: SCL # self.shape = translate(pad_header,.107,-.05,0) self.shape = add(self.shape,cylinder(.157,-.05,0,0,.025)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 2: G # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 3: SDA # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 4: V # self.shape = add(self.shape,translate(pad_header,-.107,.05,0)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) class header_APA(part): # # APA header # FCI 95278-101A04LF Bergstik 2x2x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Gnd # self.shape = translate(pad_header,.107,-.05,0) self.shape = add(self.shape,cylinder(.157,-.05,0,0,.025)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2: in # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'in')) # # pin 3: V # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # pin 4: out # self.shape = add(self.shape,translate(pad_header,-.107,.05,0)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'out')) class header_6(part): # # 6-pin header # FCI 95278-101A06LF Bergstik 2x3x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,.107,-.1,0) self.shape = add(self.shape,cylinder(.157,-.1,0,0,.025)) self.pad.append(point(.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-.107,-.1,0)) self.pad.append(point(-.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,.107,0,0)) self.pad.append(point(.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,-.107,0,0)) self.pad.append(point(-.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,.107,.1,0)) self.pad.append(point(.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,-.107,.1,0)) self.pad.append(point(-.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) class header_ATP(part): # # Asynchronous Token Protocol header # FCI 95278-101A06LF Bergstik 2x3x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,.107,-.1,0) self.shape = add(self.shape,cylinder(.157,-.1,0,0,.025)) self.pad.append(point(.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'BI')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-.107,-.1,0)) self.pad.append(point(-.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TI')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,.107,0,0)) self.pad.append(point(.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,-.107,0,0)) self.pad.append(point(-.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,.107,.1,0)) self.pad.append(point(.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TO')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,-.107,.1,0)) self.pad.append(point(-.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'BO')) class header_PDI(part): # # in-circuit PDI programming header # FCI 95278-101A06LF Bergstik 2x3x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Data # self.shape = translate(pad_header,.107,-.1,0) self.shape = add(self.shape,cylinder(.157,-.1,0,0,.025)) self.pad.append(point(.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DAT')) # # pin 2: VCC # self.shape = add(self.shape,translate(pad_header,-.107,-.1,0)) self.pad.append(point(-.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 3: NC # self.shape = add(self.shape,translate(pad_header,.107,0,0)) self.pad.append(point(.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC')) # # pin 4: NC # self.shape = add(self.shape,translate(pad_header,-.107,0,0)) self.pad.append(point(-.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC')) # # pin 5: Clock # self.shape = add(self.shape,translate(pad_header,.107,.1,0)) self.pad.append(point(.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CLK')) # # pin 6: GND # self.shape = add(self.shape,translate(pad_header,-.107,.1,0)) self.pad.append(point(-.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class header_ISP(part): # # in-circuit ISP programming header # FCI 95278-101A06LF Bergstik 2x3x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: MISO # self.shape = translate(pad_header,.107,-.1,0) self.shape = add(self.shape,cylinder(.157,-.1,0,0,.025)) self.pad.append(point(.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MISO')) # # pin 2: V # self.shape = add(self.shape,translate(pad_header,-.107,-.1,0)) self.pad.append(point(-.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # pin 3: SCK # self.shape = add(self.shape,translate(pad_header,.107,0,0)) self.pad.append(point(.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 4: MOSI # self.shape = add(self.shape,translate(pad_header,-.107,0,0)) self.pad.append(point(-.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MOSI')) # # pin 5: RST # self.shape = add(self.shape,translate(pad_header,.107,.1,0)) self.pad.append(point(.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 6: GND # self.shape = add(self.shape,translate(pad_header,-.107,.1,0)) self.pad.append(point(-.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class header_nRF24L01(part): # # nRF24L01 module header # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: # self.shape = translate(pad_header,.107,-.15,0) self.shape = add(self.shape,cylinder(.157,-.15,0,0,.025)) self.pad.append(point(.107,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2: # self.shape = add(self.shape,translate(pad_header,-.107,-.15,0)) self.pad.append(point(-.107,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 3: # self.shape = add(self.shape,translate(pad_header,.107,-.05,0)) self.pad.append(point(.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CE')) # # pin 4: # self.shape = add(self.shape,translate(pad_header,-.107,-.05,0)) self.pad.append(point(-.107,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CS')) # # pin 5: # self.shape = add(self.shape,translate(pad_header,.107,.05,0)) self.pad.append(point(.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 6: # self.shape = add(self.shape,translate(pad_header,-.107,.05,0)) self.pad.append(point(-.107,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MOSI')) # # pin 7: # self.shape = add(self.shape,translate(pad_header,.107,.15,0)) self.pad.append(point(.107,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MISO')) # # pin 8: # self.shape = add(self.shape,translate(pad_header,-.107,.15,0)) self.pad.append(point(-.107,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IRQ')) class header_servo(part): # # servo motor header # FCI 95278-101A06LF Bergstik 2x3x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: ground # self.shape = translate(pad_header,.107,-.1,0) self.shape = add(self.shape,cylinder(.157,-.1,0,0,.025)) self.pad.append(point(.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G/blk')) # # pin 2: ground # self.shape = add(self.shape,translate(pad_header,-.107,-.1,0)) self.pad.append(point(-.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G/blk')) # # pin 3: power # self.shape = add(self.shape,translate(pad_header,.107,0,0)) self.pad.append(point(.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V/red')) # # pin 4: power # self.shape = add(self.shape,translate(pad_header,-.107,0,0)) self.pad.append(point(-.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V/red')) # # pin 5: signal 0 # self.shape = add(self.shape,translate(pad_header,.107,.1,0)) self.pad.append(point(.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'S0/wht')) # # pin 6: signal 1 # self.shape = add(self.shape,translate(pad_header,-.107,.1,0)) self.pad.append(point(-.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'S1/wht')) class header_unipolar_stepper(part): # # unipolar stepper header # FCI 95278-101A06LF Bergstik 2x3x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,.107,-.1,0) self.shape = add(self.shape,cylinder(.157,-.1,0,0,.025)) self.pad.append(point(.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'red')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-.107,-.1,0)) self.pad.append(point(-.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'green')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,.107,0,0)) self.pad.append(point(.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'black')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,-.107,0,0)) self.pad.append(point(-.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'brown')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,.107,.1,0)) self.pad.append(point(.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'orange')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,-.107,.1,0)) self.pad.append(point(-.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'yellow')) class header_LCD(part): # # LCD interface header # FCI 95278-101A10LF Bergstik 2x3x0.1" # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: # self.shape = translate(pad_header,.107,-.2,0) self.shape = add(self.shape,cylinder(.157,-.2,0,0,.025)) self.pad.append(point(.107,-.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DB7\n14')) # # pin 2: # self.shape = add(self.shape,translate(pad_header,-.107,-.2,0)) self.pad.append(point(-.107,-.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DB6\n13')) # # pin 3: # self.shape = add(self.shape,translate(pad_header,.107,-.1,0)) self.pad.append(point(.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DB5\n12')) # # pin 4: # self.shape = add(self.shape,translate(pad_header,-.107,-.1,0)) self.pad.append(point(-.107,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DB4\n11')) # # pin 5: # self.shape = add(self.shape,translate(pad_header,.107,0,0)) self.pad.append(point(.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'E\n6')) # # pin 6: # self.shape = add(self.shape,translate(pad_header,-.107,0,0)) self.pad.append(point(-.107,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'R/W\n5')) # # pin 7: # self.shape = add(self.shape,translate(pad_header,.107,.1,0)) self.pad.append(point(.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RS\n4')) # # pin 8: # self.shape = add(self.shape,translate(pad_header,-.107,.1,0)) self.pad.append(point(-.107,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vee\n3')) # # pin 9: # self.shape = add(self.shape,translate(pad_header,.107,.2,0)) self.pad.append(point(.107,.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vcc\n2')) # # pin 10: # self.shape = add(self.shape,translate(pad_header,-.107,.2,0)) self.pad.append(point(-.107,.2,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND\n1')) class header_serial_reverse(part): # # serial cable header, reverse for female connector # GCT BG300-06-A-L-A # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: GND # self.shape = translate(pad_header,0,-.25,0) self.shape = add(self.shape,cylinder(-.05,-.25,0,0,.025)) self.pad.append(point(0,-.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2: CTS (brown) # self.shape = add(self.shape,translate(pad_header,0,-.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CTS')) # # pin 3: VCC (red) # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 4: Tx (orange) # self.shape = add(self.shape,translate(pad_header,0,0.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 5: Rx (yellow) # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) # # pin 6: RTS (green) # self.shape = add(self.shape,translate(pad_header,0,.25,0)) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RTS')) class header_FTDI(part): # # FTDI cable header # Sullins GEC36SBSN-M89 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: GND # self.shape = translate(pad_header,0,.25,0) self.shape = add(self.shape,cylinder(-.05,.25,0,0,.025)) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2: CTS (brown) # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CTS')) # # pin 3: VCC (red) # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 4: Tx (orange) # self.shape = add(self.shape,translate(pad_header,0,-0.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 5: Rx (yellow) # self.shape = add(self.shape,translate(pad_header,0,-.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) # # pin 6: RTS (green) # self.shape = add(self.shape,translate(pad_header,0,-.25,0)) self.pad.append(point(0,-.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RTS')) class HCSR04(part): # # HC-SR04 sonar header # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: GND # self.shape = translate(pad_header,0,.15,0) self.shape = add(self.shape,cylinder(-.05,.15,0,0,.025)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2: echo # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'echo')) # # pin 3: trig # self.shape = add(self.shape,translate(pad_header,0,-.05,0)) self.pad.append(point(0,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'trig')) # # pin 4: Vcc # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.pad.append(point(0,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vcc')) class HCSR501(part): # # HC-SR501 motion detector header # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Vcc # self.shape = translate(pad_header,0,.1,0) self.shape = add(self.shape,cylinder(-.05,.1,0,0,.025)) self.pad.append(point(0,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vcc')) # # pin 2: out # self.shape = add(self.shape,translate(pad_header,0,0,0)) self.pad.append(point(0,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'out')) # # pin 3: GND # self.shape = add(self.shape,translate(pad_header,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) pad_RN4871_left = cube(-0.5/25.4,1/25.4,-0.7/2/25.4,0.7/2/25.4,0,0) pad_RN4871_right = cube(-1/25.4,0.5/25.4,-0.7/2/25.4,0.7/2/25.4,0,0) pad_RN4871_bot = cube(-0.7/2/25.4,0.7/2/25.4,-0.5/25.4,1/25.4,0,0) class RN4871(part): # # RN4871 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] width = 9/25.4 height = 7.5/25.4 bottom = 1.9/25.4 left = 1.5/25.4 pitch = 1.2/25.4 size = .004 # # pin 1: # self.shape = translate(pad_RN4871_left,-width/2.0,-height+bottom+4*pitch,0) self.pad.append(point(-width/2.0,-height+bottom+4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'BT_RF',line=size)) # # pin 2: # self.shape = add(self.shape,translate(pad_RN4871_left,-width/2.0,-height+bottom+3*pitch,0)) self.pad.append(point(-width/2.0,-height+bottom+3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=size)) # # pin 3: # self.shape = add(self.shape,translate(pad_RN4871_left,-width/2.0,-height+bottom+2*pitch,0)) self.pad.append(point(-width/2.0,-height+bottom+2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P1_2',line=size)) # # pin 4: # self.shape = add(self.shape,translate(pad_RN4871_left,-width/2.0,-height+bottom+1*pitch,0)) self.pad.append(point(-width/2.0,-height+bottom+1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P1_3',line=size)) # # pin 5: # self.shape = add(self.shape,translate(pad_RN4871_left,-width/2.0,-height+bottom+0*pitch,0)) self.pad.append(point(-width/2.0,-height+bottom+0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P1_7',line=size)) # # pin 6: # self.shape = add(self.shape,translate(pad_RN4871_bot,-width/2.0+left+0*pitch,-height,0)) self.pad.append(point(-width/2.0+left+0*pitch,-height,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P1_6',line=size,angle=90)) # # pin 7: # self.shape = add(self.shape,translate(pad_RN4871_bot,-width/2.0+left+1*pitch,-height,0)) self.pad.append(point(-width/2.0+left+1*pitch,-height,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RX',line=size,angle=90)) # # pin 8: # self.shape = add(self.shape,translate(pad_RN4871_bot,-width/2.0+left+2*pitch,-height,0)) self.pad.append(point(-width/2.0+left+2*pitch,-height,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TX',line=size,angle=90)) # # pin 9: # self.shape = add(self.shape,translate(pad_RN4871_bot,-width/2.0+left+3*pitch,-height,0)) self.pad.append(point(-width/2.0+left+3*pitch,-height,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P3_6',line=size,angle=90)) # # pin 10: # self.shape = add(self.shape,translate(pad_RN4871_bot,-width/2.0+left+4*pitch,-height,0)) self.pad.append(point(-width/2.0+left+4*pitch,-height,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST_N',line=size,angle=90)) # # pin 11: # self.shape = add(self.shape,translate(pad_RN4871_bot,-width/2.0+left+5*pitch,-height,0)) self.pad.append(point(-width/2.0+left+5*pitch,-height,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P0_0',line=size,angle=90)) # # pin 12: # self.shape = add(self.shape,translate(pad_RN4871_right,width/2.0,-height+bottom+0*pitch,0)) self.pad.append(point(width/2.0,-height+bottom+0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P0_2',line=size)) # # pin 13: # self.shape = add(self.shape,translate(pad_RN4871_right,width/2.0,-height+bottom+1*pitch,0)) self.pad.append(point(width/2.0,-height+bottom+1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=size)) # # pin 14: # self.shape = add(self.shape,translate(pad_RN4871_right,width/2.0,-height+bottom+2*pitch,0)) self.pad.append(point(width/2.0,-height+bottom+2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VBAT',line=size)) # # pin 15: # self.shape = add(self.shape,translate(pad_RN4871_right,width/2.0,-height+bottom+3*pitch,0)) self.pad.append(point(width/2.0,-height+bottom+3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P2_7',line=size)) # # pin 16: # self.shape = add(self.shape,translate(pad_RN4871_right,width/2.0,-height+bottom+4*pitch,0)) self.pad.append(point(width/2.0,-height+bottom+4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P2_0',line=size)) pad_HM11 = cube(-.047,.047,-.0177,.0177,0,0) class HM11(part): # # HM-11 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] height = 18.5/25.4 width = 13.5/25.4 pitch = 1.5/25.4 bottom = 1/25.4 offset = 0 size = .004 # # pin 1: # self.shape = translate(pad_HM11,-width/2.0+offset,-height/2.0+bottom+7*pitch,0) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+7*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RTS',line=size)) # # pin 2: # self.shape = add(self.shape,translate(pad_HM11,-width/2.0+offset,-height/2.0+bottom+6*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+6*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TX',line=size)) # # pin 3: # self.shape = add(self.shape,translate(pad_HM11,-width/2.0+offset,-height/2.0+bottom+5*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+5*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CTS',line=size)) # # pin 4: # self.shape = add(self.shape,translate(pad_HM11,-width/2.0+offset,-height/2.0+bottom+4*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RX',line=size)) # # pin 5: # self.shape = add(self.shape,translate(pad_HM11,-width/2.0+offset,-height/2.0+bottom+3*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC',line=size)) # # pin 6: # self.shape = add(self.shape,translate(pad_HM11,-width/2.0+offset,-height/2.0+bottom+2*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC',line=size)) # # pin 7: # self.shape = add(self.shape,translate(pad_HM11,-width/2.0+offset,-height/2.0+bottom+1*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC',line=size)) # # pin 8: # self.shape = add(self.shape,translate(pad_HM11,-width/2.0+offset,-height/2.0+bottom+0*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC',line=size)) # # pin 9: # self.shape = add(self.shape,translate(pad_HM11,width/2.0-offset,-height/2.0+bottom+0*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC',line=size)) # # pin 10: # self.shape = add(self.shape,translate(pad_HM11,width/2.0-offset,-height/2.0+bottom+1*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC',line=size)) # # pin 11: # self.shape = add(self.shape,translate(pad_HM11,width/2.0-offset,-height/2.0+bottom+2*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST',line=size)) # # pin 12: # self.shape = add(self.shape,translate(pad_HM11,width/2.0-offset,-height/2.0+bottom+3*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=size)) # # pin 13: # self.shape = add(self.shape,translate(pad_HM11,width/2.0-offset,-height/2.0+bottom+4*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO3',line=size)) # # pin 14: # self.shape = add(self.shape,translate(pad_HM11,width/2.0-offset,-height/2.0+bottom+5*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+5*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO2',line=size)) # # pin 15: # self.shape = add(self.shape,translate(pad_HM11,width/2.0-offset,-height/2.0+bottom+6*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+6*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO1',line=size)) # # pin 16: # self.shape = add(self.shape,translate(pad_HM11,width/2.0-offset,-height/2.0+bottom+7*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+7*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO0',line=size)) class ESP32_WROOM(part): # # ESP32-WROOM # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] pad = cube(-1/25.4,1/25.4,-.4/25.4,.4/25.4,0,0) padb = cube(-.4/25.4,.4/25.4,-1/25.4,1/25.4,0,0) width = 17/25.4 height = 25.5/25.4 pitch = 1.27/25.4 # # pin 1 # self.shape = translate(pad,-width/2,6*pitch,0) self.pad.append(point(-width/2,6*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2 # self.shape = add(self.shape,translate(pad,-width/2,5*pitch,0)) self.pad.append(point(-width/2,5*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3V3')) # # pin 3 # self.shape = add(self.shape,translate(pad,-width/2,4*pitch,0)) self.pad.append(point(-width/2,4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'EN')) # # pin 4 # self.shape = add(self.shape,translate(pad,-width/2,3*pitch,0)) self.pad.append(point(-width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VP')) # # pin 5 # self.shape = add(self.shape,translate(pad,-width/2,2*pitch,0)) self.pad.append(point(-width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VN')) # # pin 6 # self.shape = add(self.shape,translate(pad,-width/2,1*pitch,0)) self.pad.append(point(-width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO34')) # # pin 7 # self.shape = add(self.shape,translate(pad,-width/2,0*pitch,0)) self.pad.append(point(-width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO35')) # # pin 8 # self.shape = add(self.shape,translate(pad,-width/2,-1*pitch,0)) self.pad.append(point(-width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO32')) # # pin 9 # self.shape = add(self.shape,translate(pad,-width/2,-2*pitch,0)) self.pad.append(point(-width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO33')) # # pin 10 # self.shape = add(self.shape,translate(pad,-width/2,-3*pitch,0)) self.pad.append(point(-width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO25')) # # pin 11 # self.shape = add(self.shape,translate(pad,-width/2,-4*pitch,0)) self.pad.append(point(-width/2,-4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO26')) # # pin 12 # self.shape = add(self.shape,translate(pad,-width/2,-5*pitch,0)) self.pad.append(point(-width/2,-5*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO27')) # # pin 13 # self.shape = add(self.shape,translate(pad,-width/2,-6*pitch,0)) self.pad.append(point(-width/2,-6*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO14')) # # pin 14 # self.shape = add(self.shape,translate(pad,-width/2,-7*pitch,0)) self.pad.append(point(-width/2,-7*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO12')) # # pin 15 # self.shape = add(self.shape,translate(padb,-4.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(-4.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',angle=90)) # # pin 16 # self.shape = add(self.shape,translate(padb,-3.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(-3.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO13',angle=90)) # # pin 17 # self.shape = add(self.shape,translate(padb,-2.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(-2.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SHD',angle=90)) # # pin 18 # self.shape = add(self.shape,translate(padb,-1.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(-1.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SWP',angle=90)) # # pin 19 # self.shape = add(self.shape,translate(padb,-0.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(-0.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCS',angle=90)) # # pin 20 # self.shape = add(self.shape,translate(padb,0.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(0.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK',angle=90)) # # pin 21 # self.shape = add(self.shape,translate(padb,1.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(1.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDO',angle=90)) # # pin 22 # self.shape = add(self.shape,translate(padb,2.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(2.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDI',angle=90)) # # pin 23 # self.shape = add(self.shape,translate(padb,3.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(3.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO15',angle=90)) # # pin 24 # self.shape = add(self.shape,translate(padb,4.5*pitch,-7*pitch-1/25.4,0)) self.pad.append(point(4.5*pitch,-7*pitch-1/25.4,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO2',angle=90)) # # pin 25 # self.shape = add(self.shape,translate(pad,width/2,-7*pitch,0)) self.pad.append(point(width/2,-7*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO0')) # # pin 26 # self.shape = add(self.shape,translate(pad,width/2,-6*pitch,0)) self.pad.append(point(width/2,-6*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO4')) # # pin 27 # self.shape = add(self.shape,translate(pad,width/2,-5*pitch,0)) self.pad.append(point(width/2,-5*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO16')) # # pin 28 # self.shape = add(self.shape,translate(pad,width/2,-4*pitch,0)) self.pad.append(point(width/2,-4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO17')) # # pin 29 # self.shape = add(self.shape,translate(pad,width/2,-3*pitch,0)) self.pad.append(point(width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO5')) # # pin 30 # self.shape = add(self.shape,translate(pad,width/2,-2*pitch,0)) self.pad.append(point(width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO18')) # # pin 31 # self.shape = add(self.shape,translate(pad,width/2,-1*pitch,0)) self.pad.append(point(width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO19')) # # pin 32 # self.shape = add(self.shape,translate(pad,width/2,0*pitch,0)) self.pad.append(point(width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC')) # # pin 33 # self.shape = add(self.shape,translate(pad,width/2,1*pitch,0)) self.pad.append(point(width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO21')) # # pin 34 # self.shape = add(self.shape,translate(pad,width/2,2*pitch,0)) self.pad.append(point(width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RX0')) # # pin 35 # self.shape = add(self.shape,translate(pad,width/2,3*pitch,0)) self.pad.append(point(width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TX0')) # # pin 36 # self.shape = add(self.shape,translate(pad,width/2,4*pitch,0)) self.pad.append(point(width/2,4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO22')) # # pin 37 # self.shape = add(self.shape,translate(pad,width/2,5*pitch,0)) self.pad.append(point(width/2,5*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO23')) # # pin 38 # self.shape = add(self.shape,translate(pad,width/2,6*pitch,0)) self.pad.append(point(width/2,6*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class ESP32_CAM(part): # # ESP32-CAM # Sullins S5635-ND # def __init__(self,value=''): pad_header = cube(-.079/2,.079/2,-.039/2,.039/2,0,0) d = .209/2-.079/2 w = 0.9 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,+d-w/2,.35,0) self.pad.append(point(+d-w/2,.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'+5V')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,-d-w/2,.25,0)) self.pad.append(point(-d-w/2,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,+d-w/2,.15,0)) self.pad.append(point(+d-w/2,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO12')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,-d-w/2,.05,0)) self.pad.append(point(-d-w/2,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO13')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,+d-w/2,-.05,0)) self.pad.append(point(+d-w/2,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO15')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,-d-w/2,-.15,0)) self.pad.append(point(-d-w/2,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO14')) # # pin 7 # self.shape = add(self.shape,translate(pad_header,+d-w/2,-.25,0)) self.pad.append(point(+d-w/2,-.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO2')) # # pin 8 # self.shape = add(self.shape,translate(pad_header,-d-w/2,-.35,0)) self.pad.append(point(-d-w/2,-.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO4')) # # pin 9 # self.shape = add(self.shape,translate(pad_header,-d+w/2,-.35,0)) self.pad.append(point(-d+w/2,-.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 10 # self.shape = add(self.shape,translate(pad_header,+d+w/2,-.25,0)) self.pad.append(point(+d+w/2,-.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'U0T')) # # pin 11 # self.shape = add(self.shape,translate(pad_header,-d+w/2,-.15,0)) self.pad.append(point(-d+w/2,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'U0R')) # # pin 12 # self.shape = add(self.shape,translate(pad_header,+d+w/2,-.05,0)) self.pad.append(point(+d+w/2,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 13 # self.shape = add(self.shape,translate(pad_header,-d+w/2,.05,0)) self.pad.append(point(-d+w/2,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 14 # self.shape = add(self.shape,translate(pad_header,+d+w/2,.15,0)) self.pad.append(point(+d+w/2,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO0')) # # pin 15 # self.shape = add(self.shape,translate(pad_header,-d+w/2,.25,0)) self.pad.append(point(-d+w/2,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO16')) # # pin 16 # self.shape = add(self.shape,translate(pad_header,+d+w/2,.35,0)) self.pad.append(point(+d+w/2,.35,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3V3')) class ESP8266_12E(part): # # ESP8266 12E # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] height = 24/25.4 width = 16/25.4 pitch = 2/25.4 bottom = 1.8/25.4 left = 3/25.4 offset = .4/25.4 - .01 size = .004 pad_ESP8266 = cube(-.0493,.0493,-.0197,.0197,0,0) pad_ESP8266_bot = cube(-.0197,.0197,-.0415,.0415,0,0) # # pin 1: # self.shape = translate(pad_ESP8266,-width/2.0+offset,-height/2.0+bottom+7*pitch,0) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+7*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST',line=size)) # # pin 2: # self.shape = add(self.shape,translate(pad_ESP8266,-width/2.0+offset,-height/2.0+bottom+6*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+6*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'ADC',line=size)) # # pin 3: # self.shape = add(self.shape,translate(pad_ESP8266,-width/2.0+offset,-height/2.0+bottom+5*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+5*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'EN',line=size)) # # pin 4: # self.shape = add(self.shape,translate(pad_ESP8266,-width/2.0+offset,-height/2.0+bottom+4*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO16',line=size)) # # pin 5: # self.shape = add(self.shape,translate(pad_ESP8266,-width/2.0+offset,-height/2.0+bottom+3*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO14',line=size)) # # pin 6: # self.shape = add(self.shape,translate(pad_ESP8266,-width/2.0+offset,-height/2.0+bottom+2*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO12',line=size)) # # pin 7: # self.shape = add(self.shape,translate(pad_ESP8266,-width/2.0+offset,-height/2.0+bottom+1*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO13',line=size)) # # pin 8: # self.shape = add(self.shape,translate(pad_ESP8266,-width/2.0+offset,-height/2.0+bottom+0*pitch,0)) self.pad.append(point(-width/2.0+offset,-height/2.0+bottom+0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD',line=size)) # # pin 9: # self.shape = add(self.shape,translate(pad_ESP8266_bot,-width/2.0+left+0*pitch,-height/2.0+offset,0)) self.pad.append(point(-width/2.0+left+0*pitch,-height/2.0+offset,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CS',line=size,angle=90)) # # pin 10: # self.shape = add(self.shape,translate(pad_ESP8266_bot,-width/2.0+left+1*pitch,-height/2.0+offset,0)) self.pad.append(point(-width/2.0+left+1*pitch,-height/2.0+offset,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MISO',line=size,angle=90)) # # pin 11: # self.shape = add(self.shape,translate(pad_ESP8266_bot,-width/2.0+left+2*pitch,-height/2.0+offset,0)) self.pad.append(point(-width/2.0+left+2*pitch,-height/2.0+offset,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO9',line=size,angle=90)) # # pin 12: # self.shape = add(self.shape,translate(pad_ESP8266_bot,-width/2.0+left+3*pitch,-height/2.0+offset,0)) self.pad.append(point(-width/2.0+left+3*pitch,-height/2.0+offset,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO10',line=size,angle=90)) # # pin 13: # self.shape = add(self.shape,translate(pad_ESP8266_bot,-width/2.0+left+4*pitch,-height/2.0+offset,0)) self.pad.append(point(-width/2.0+left+4*pitch,-height/2.0+offset,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MOSI',line=size,angle=90)) # # pin 14: # self.shape = add(self.shape,translate(pad_ESP8266_bot,-width/2.0+left+5*pitch,-height/2.0+offset,0)) self.pad.append(point(-width/2.0+left+5*pitch,-height/2.0+offset,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCLK',line=size,angle=90)) # # pin 15: # self.shape = add(self.shape,translate(pad_ESP8266,width/2.0-offset,-height/2.0+bottom+0*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+0*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=size)) # # pin 16: # self.shape = add(self.shape,translate(pad_ESP8266,width/2.0-offset,-height/2.0+bottom+1*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+1*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO15',line=size)) # # pin 17: # self.shape = add(self.shape,translate(pad_ESP8266,width/2.0-offset,-height/2.0+bottom+2*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+2*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO2',line=size)) # # pin 18: # self.shape = add(self.shape,translate(pad_ESP8266,width/2.0-offset,-height/2.0+bottom+3*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+3*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO0',line=size)) # # pin 19: # self.shape = add(self.shape,translate(pad_ESP8266,width/2.0-offset,-height/2.0+bottom+4*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+4*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO4',line=size)) # # pin 20: # self.shape = add(self.shape,translate(pad_ESP8266,width/2.0-offset,-height/2.0+bottom+5*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+5*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GPIO5',line=size)) # # pin 21: # self.shape = add(self.shape,translate(pad_ESP8266,width/2.0-offset,-height/2.0+bottom+6*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+6*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RXD',line=size)) # # pin 22: # self.shape = add(self.shape,translate(pad_ESP8266,width/2.0-offset,-height/2.0+bottom+7*pitch,0)) self.pad.append(point(width/2.0-offset,-height/2.0+bottom+7*pitch,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TXD',line=size)) pad_MTA = cube(-.021,.021,-.041,.041,0,0) pad_MTA_solder = cube(-.071,.071,-.041,.041,0,0) class MTA_2(part): # # AMP 1445121-2 # MTA .050 SMT 2-pin vertical # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_MTA,-.025,-.1,0) self.pad.append(point(-.025,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad_MTA,.025,.1,0)) self.pad.append(point(.025,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) # # solder pads # self.shape = add(self.shape,translate(pad_MTA_solder,-.187,0,0)) self.shape = add(self.shape,translate(pad_MTA_solder,.187,0,0)) class MTA_power(part): # # AMP 1445121-2 # MTA .050 SMT 2-pin vertical # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Gnd # self.shape = translate(pad_MTA,-.025,-.1,0) self.pad.append(point(-.025,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1\nGND')) # # pin 2: Vcc # self.shape = add(self.shape,translate(pad_MTA,.025,.1,0)) self.pad.append(point(.025,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vcc')) # # solder pads # self.shape = add(self.shape,translate(pad_MTA_solder,-.187,0,0)) self.shape = add(self.shape,translate(pad_MTA_solder,.187,0,0)) class MTA_3(part): # # AMP 1445121-3 # MTA .050 SMT 3-pin vertical # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: GND # self.shape = translate(pad_MTA,.05,.1,0) self.pad.append(point(.05,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2: power # self.shape = add(self.shape,translate(pad_MTA,-.05,.1,0)) self.pad.append(point(-.05,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) # # pin 3: data # self.shape = add(self.shape,translate(pad_MTA,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3')) # # solder pads # self.shape = add(self.shape,translate(pad_MTA_solder,-.212,0,0)) self.shape = add(self.shape,translate(pad_MTA_solder,.212,0,0)) class MTA_i0(part): # # AMP 1445121-3 # MTA .050 SMT 3-pin vertical # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: GND # self.shape = translate(pad_MTA,.05,.1,0) self.pad.append(point(.05,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1\nGND')) # # pin 2: power # self.shape = add(self.shape,translate(pad_MTA,-.05,.1,0)) self.pad.append(point(-.05,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # pin 3: data # self.shape = add(self.shape,translate(pad_MTA,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'data')) # # solder pads # self.shape = add(self.shape,translate(pad_MTA_solder,-.212,0,0)) self.shape = add(self.shape,translate(pad_MTA_solder,.212,0,0)) class MTA_4(part): # # AMP 1445121-4 # MTA .050 SMT 4-pin vertical # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_MTA,-.075,-.1,0) self.pad.append(point(-.075,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad_MTA,.025,-.1,0)) self.pad.append(point(.025,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) # # pin 3 # self.shape = add(self.shape,translate(pad_MTA,.075,.1,0)) self.pad.append(point(.075,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3')) # # pin 4 # self.shape = add(self.shape,translate(pad_MTA,-.025,.1,0)) self.pad.append(point(-.025,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'4')) # # solder pads # self.shape = add(self.shape,translate(pad_MTA_solder,-.237,0,0)) self.shape = add(self.shape,translate(pad_MTA_solder,.237,0,0)) class MTA_serial(part): # # AMP 1445121-4 # MTA .050 SMT 4-pin vertical # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Gnd # self.shape = translate(pad_MTA,-.075,-.1,0) self.pad.append(point(-.075,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2: Tx # self.shape = add(self.shape,translate(pad_MTA,.025,-.1,0)) self.pad.append(point(.025,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 3: Rx # self.shape = add(self.shape,translate(pad_MTA,.075,.1,0)) self.pad.append(point(.075,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) # # pin 4: DTR # self.shape = add(self.shape,translate(pad_MTA,-.025,.1,0)) self.pad.append(point(-.025,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DTR')) # # solder pads # self.shape = add(self.shape,translate(pad_MTA_solder,-.237,0,0)) self.shape = add(self.shape,translate(pad_MTA_solder,.237,0,0)) class MTA_PS2(part): # # AMP 1445121-4 # MTA .050 SMT 4-pin vertical # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: GND # self.shape = translate(pad_MTA,-.075,-.1,0) self.pad.append(point(-.075,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1\nGND')) # # pin 2: data # self.shape = add(self.shape,translate(pad_MTA,.025,-.1,0)) self.pad.append(point(.025,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'data')) # # pin 3: clock # self.shape = add(self.shape,translate(pad_MTA,.075,.1,0)) self.pad.append(point(.075,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'clock')) # # pin 4: 5V # self.shape = add(self.shape,translate(pad_MTA,-.025,.1,0)) self.pad.append(point(-.025,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'5V')) # # solder pads # self.shape = add(self.shape,translate(pad_MTA_solder,-.237,0,0)) self.shape = add(self.shape,translate(pad_MTA_solder,.237,0,0)) class MTA_5(part): # # AMP 1445121-5 # MTA .050 SMT 5-pin vertical # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_MTA,-.1,-.1,0) self.pad.append(point(-.1,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad_MTA,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) # # pin 3 # self.shape = add(self.shape,translate(pad_MTA,.1,-.1,0)) self.pad.append(point(.1,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3')) # # pin 4 # self.shape = add(self.shape,translate(pad_MTA,.05,.1,0)) self.pad.append(point(.05,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'4')) # # pin 5 # self.shape = add(self.shape,translate(pad_MTA,-.05,.1,0)) self.pad.append(point(-.05,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'5')) # # solder pads # self.shape = add(self.shape,translate(pad_MTA_solder,-.262,0,0)) self.shape = add(self.shape,translate(pad_MTA_solder,.262,0,0)) class MTA_ICP(part): # # AMP 1445121-5 # MTA .050 SMT 5-pin vertical # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: MISO # self.shape = translate(pad_MTA,-.1,-.1,0) self.pad.append(point(-.1,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MISO')) # # pin 2: GND # self.shape = add(self.shape,translate(pad_MTA,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 3: MOSI # self.shape = add(self.shape,translate(pad_MTA,.1,-.1,0)) self.pad.append(point(.1,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MOSI')) # # pin 4: -RESET # self.shape = add(self.shape,translate(pad_MTA,.05,.1,0)) self.pad.append(point(.05,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-RESET')) # # pin 5: SCK # self.shape = add(self.shape,translate(pad_MTA,-.05,.1,0)) self.pad.append(point(-.05,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK')) # # solder pads # self.shape = add(self.shape,translate(pad_MTA_solder,-.262,0,0)) self.shape = add(self.shape,translate(pad_MTA_solder,.262,0,0)) pad_screw_terminal = cylinder(0,0,0,0,.047) hole_screw_terminal = circle(0,0,.025) class screw_terminal_2(part): # # On Shore ED555/2DS # two position screw terminal # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_screw_terminal,-.069,0,0) self.pad.append(point(-.069,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1')) # # pin 2 # self.shape = add(self.shape,translate(pad_screw_terminal,.069,0,0)) self.pad.append(point(.069,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2')) # # holes # self.shape = add(self.shape,translate(hole_screw_terminal,-.069,0,0)) self.shape = add(self.shape,translate(hole_screw_terminal,.069,0,0)) class screw_terminal_power(part): # # On Shore ED555/2DS # power screw terminal # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_screw_terminal,-.069,0,0) self.pad.append(point(-.069,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 2 # self.shape = add(self.shape,translate(pad_screw_terminal,.069,0,0)) self.pad.append(point(.069,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # holes # self.shape = add(self.shape,translate(hole_screw_terminal,-.069,0,0)) self.shape = add(self.shape,translate(hole_screw_terminal,.069,0,0)) class screw_terminal_i0(part): # # On Shore ED555/3DS # i0 screw terminal # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Gnd # self.shape = translate(pad_screw_terminal,-.138,0,0) self.pad.append(point(-.138,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Gnd\n1')) # # pin 2: data # self.shape = add(self.shape,pad_screw_terminal) self.pad.append(point(0,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'data')) # # pin 3: V # self.shape = add(self.shape,translate(pad_screw_terminal,.138,0,0)) self.pad.append(point(.138,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # holes # self.shape = add(self.shape,translate(hole_screw_terminal,-.138,0,0)) self.shape = add(self.shape,hole_screw_terminal) self.shape = add(self.shape,translate(hole_screw_terminal,.138,0,0)) class power_65mm(part): # # CUI PJ1-023-SMT # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: power # self.shape = cube(.433,.512,-.047,.047,0,0) self.pad.append(point(.467,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'P')) # # pin 2: ground # self.shape = add(self.shape,cube(.285,.423,-.189,-.098,0,0)) self.pad.append(point(.354,-.144,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 3: contact # self.shape = add(self.shape,cube(.325,.463,.098,.189,0,0)) self.pad.append(point(.394,.144,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'C')) # # solder pads # self.shape = add(self.shape,cube(.108,.246,-.169,-.110,0,0)) self.shape = add(self.shape,cube(.069,.207,.110,.169,0,0)) pad_stereo_2_5mm = cube(-.03,.03,-.05,.05,0,0) class stereo_2_5mm(part): # # CUI SJ1-2533-SMT # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: base # self.shape = translate(pad_stereo_2_5mm,-.130,-.16,0) self.pad.append(point(-.130,-.149,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'base')) # # pin 2: tip # self.shape = add(self.shape,translate(pad_stereo_2_5mm,.197,.15,0)) self.pad.append(point(.197,.141,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'tip')) # # pin 3: middle # self.shape = add(self.shape,translate(pad_stereo_2_5mm,-.012,-.16,0)) self.pad.append(point(-.012,-.149,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'middle')) pad_Molex = cube(-.0155,.0155,-.0265,.0265,0,0) pad_Molex_solder = cube(-.055,.055,-.065,.065,0,0) class Molex_serial(part): # # Molex 53261-0471 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Rx # self.shape = translate(pad_Molex,-.075,.064,0) self.pad.append(point(-.075,.064,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Rx')) # # pin 2: Tx # self.shape = add(self.shape,translate(pad_Molex,-.025,.064,0)) self.pad.append(point(-.025,.064,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Tx')) # # pin 3: DTR # self.shape = add(self.shape,translate(pad_Molex,.025,.064,0)) self.pad.append(point(.025,.064,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DTR')) # # pin 4: GND # self.shape = add(self.shape,translate(pad_Molex,.075,.064,0)) self.pad.append(point(.075,.064,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # solder pads # self.shape = add(self.shape,translate(pad_Molex_solder,-.16,-.065,0)) self.shape = add(self.shape,translate(pad_Molex_solder,.16,-.065,0)) ############################################################ # switches ############################################################ class slide_switch(part): # # slide switch # C&K AYZ0102AGRLC # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] pad = cube(-.039/2,.039/2,-.047/2,.047/2,0,0) # # pad 1 # self.shape = translate(pad,-.098,.1,0) self.pad.append(point(-.098,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pad 2 # self.shape = add(self.shape,translate(pad,0,.1,0)) self.pad.append(point(0,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # pad 3 # self.shape = add(self.shape,translate(pad,.098,.1,0)) self.pad.append(point(.098,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # holes # self.holes = cylinder(-.118/2,0,zb,zt,.034/2) self.holes = add(self.holes,cylinder(.118/2,0,zb,zt,.034/2)) class button_6mm(part): # # Omron 6mm pushbutton # B3SN-3112P # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] pad_button_6mm = cube(-.04,.04,-.03,.03,0,0) # # left 1 # self.shape = translate(pad_button_6mm,-.125,.08,0) self.pad.append(point(-.125,.08,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'L1')) # # right 1 # self.shape = add(self.shape,translate(pad_button_6mm,-.125,-.08,0)) self.pad.append(point(-.125,-.08,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'R1')) # # right 2 # self.shape = add(self.shape,translate(pad_button_6mm,.125,-.08,0)) self.pad.append(point(.125,-.08,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'R2')) # # left 2 # self.shape = add(self.shape,translate(pad_button_6mm,.125,.08,0)) self.pad.append(point(.125,.08,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'L2')) ############################################################ # crystals and resonators ############################################################ pad_XTAL_EFOBM = cube(-.016,.016,-.085,.085,0,0) class XTAL_EFOBM(part): # # Panasonic EFOBM series # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # left # self.shape = translate(pad_XTAL_EFOBM,-.053,0,0) self.pad.append(point(-.053,0,0)) # # ground # self.shape = add(self.shape,translate(pad_XTAL_EFOBM,0,0,0)) self.pad.append(point(0,0,0)) # # right # self.shape = add(self.shape,translate(pad_XTAL_EFOBM,.053,0,0)) self.pad.append(point(.053,0,0)) pad_XTAL_NX5032GA = cube(-.039,.039,-.047,.047,0,0) .079 class XTAL_NX5032GA(part): # # NDK NX5032GA # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # left # self.shape = translate(pad_XTAL_NX5032GA,-.079,0,0) self.pad.append(point(-.079,0,0)) # # right # self.shape = add(self.shape,translate(pad_XTAL_NX5032GA,.079,0,0)) self.pad.append(point(.079,0,0)) pad_XTAL_CSM_7 = cube(-.108,.108,-.039,.039,0,0) class XTAL_CSM_7(part): # # ECS CSM-7 series # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # left # self.shape = translate(pad_XTAL_CSM_7,-.187,0,0) self.pad.append(point(-.187,0,0)) # # right # self.shape = add(self.shape,translate(pad_XTAL_CSM_7,.187,0,0)) self.pad.append(point(.187,0,0)) ############################################################ # diodes, transistors, regulators, sensors ############################################################ class ALS31313(part): # # Allegro ALS31313 vector magnetometer # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] l = 0.003 d = 6.4/2/25.4 p = 0.65/25.4 w = 0.01/2 h = 1.7/2/25.4 pad = cube(-h,h,-w,w,0,0) # # pin 1 # self.shape = translate(pad,-d,1.5*p,0) self.shape = add(self.shape,cylinder(-d-h,1.5*p,0,0,w)) self.pad.append(point(-d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.VCC',line=l)) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,0.5*p,0)) self.pad.append(point(-d,0.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A0',line=l)) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,-0.5*p,0)) self.pad.append(point(-d,-0.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=l)) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,-1.5*p,0)) self.pad.append(point(-d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'INT',line=l)) # # pin 5 # self.shape = add(self.shape,translate(pad,d,-1.5*p,0)) self.pad.append(point(d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC',line=l)) # # pin 6 # self.shape = add(self.shape,translate(pad,d,-0.5*p,0)) self.pad.append(point(d,-0.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A1',line=l)) # # pin 7 # self.shape = add(self.shape,translate(pad,d,0.5*p,0)) self.pad.append(point(d,0.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA',line=l)) # # pin 8 # self.shape = add(self.shape,translate(pad,d,1.5*p,0)) self.pad.append(point(d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL',line=l)) class MLX90395(part): # # Melexis MLX90395 vector magnetometer # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 0.11 w = 0.015 h = .03 pad = cube(-h,h,-w,w,0,0) # # pin 1 # self.shape = translate(pad,-d,.075,0) self.shape = add(self.shape,cylinder(-d-h,.075,0,0,w)) self.pad.append(point(-d,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.SCL')) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,.025,0)) self.pad.append(point(-d,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,-.025,0)) self.pad.append(point(-d,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MISO')) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,-.075,0)) self.pad.append(point(-d,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'INT')) # # pin 5 # self.shape = add(self.shape,translate(pad,d,-.075,0)) self.pad.append(point(d,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A0')) # # pin 6 # self.shape = add(self.shape,translate(pad,d,-.025,0)) self.pad.append(point(d,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 7 # self.shape = add(self.shape,translate(pad,d,.025,0)) self.pad.append(point(d,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD')) # # pin 8 # self.shape = add(self.shape,translate(pad,d,.075,0)) self.pad.append(point(d,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MS')) class TLE493D(part): # # Infineon TlE493D three-axis magnetometer # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 1.325/25.4 w = 0.5/25.4/2 h = 0.75/25.4/2 p = 0.95/25.4 pad = cube(-w,w,-h,h,0,0) s = 0.003 # # pin 1 # self.shape = translate(pad,-p,-d,0) self.shape = add(self.shape,cylinder(-p,-d-h,0,0,w)) self.pad.append(point(-p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.SCL',line=s,angle=90)) # # pin 2 # self.shape = add(self.shape,translate(pad,0,-d,0)) self.pad.append(point(0,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s,angle=90)) # # pin 3 # self.shape = add(self.shape,translate(pad,p,-d,0)) self.pad.append(point(p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s,angle=90)) # # pin 4 # self.shape = add(self.shape,translate(pad,p,d,0)) self.pad.append(point(p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD',line=s,angle=90)) # # pin 5 # self.shape = add(self.shape,translate(pad,0,d,0)) self.pad.append(point(0,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s,angle=90)) # # pin 6 # self.shape = add(self.shape,translate(pad,-p,d,0)) self.pad.append(point(-p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA',line=s,angle=90)) class DRV8428_HTSSOP(part): # # TI DRV8428PWPR stepper driver # HTSSOP package # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 0.12 w = 0.029 h = 0.0053 p = 0.02559 pad = cube(-w,w,-h,h,0,0) s = 0.003 # # pin 1 # self.shape = translate(pad,-d,3.5*p,0) self.shape = add(self.shape,cylinder(-d-w,3.5*p,0,0,h)) self.pad.append(point(-d,3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.VM',line=s)) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,2.5*p,0)) self.pad.append(point(-d,2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PGND',line=s)) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,1.5*p,0)) self.pad.append(point(-d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'AOUT1',line=s)) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,.5*p,0)) self.pad.append(point(-d,.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'AOUT2',line=s)) # # pin 5 # self.shape = add(self.shape,translate(pad,-d,-.5*p,0)) self.pad.append(point(-d,-.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'BOUT2',line=s)) # # pin 6 # self.shape = add(self.shape,translate(pad,-d,-1.5*p,0)) self.pad.append(point(-d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'BOUT1',line=s)) # # pin 7 # self.shape = add(self.shape,translate(pad,-d,-2.5*p,0)) self.pad.append(point(-d,-2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) # # pin 8 # self.shape = add(self.shape,translate(pad,-d,-3.5*p,0)) self.pad.append(point(-d,-3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DVDD',line=s)) # # pin 9 # self.shape = add(self.shape,translate(pad,d,-3.5*p,0)) self.pad.append(point(d,-3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VREF',line=s)) # # pin 10 # self.shape = add(self.shape,translate(pad,d,-2.5*p,0)) self.pad.append(point(d,-2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'M0',line=s)) # # pin 11 # self.shape = add(self.shape,translate(pad,d,-1.5*p,0)) self.pad.append(point(d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DECAY',line=s)) # # pin 12 # self.shape = add(self.shape,translate(pad,d,-.5*p,0)) self.pad.append(point(d,-.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'M1',line=s)) # # pin 13 # self.shape = add(self.shape,translate(pad,d,.5*p,0)) self.pad.append(point(d,.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'STEP',line=s)) # # pin 14 # self.shape = add(self.shape,translate(pad,d,1.5*p,0)) self.pad.append(point(d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIR',line=s)) # # pin 15 # self.shape = add(self.shape,translate(pad,d,2.5*p,0)) self.pad.append(point(d,2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'EN',line=s)) # # pin 16 # self.shape = add(self.shape,translate(pad,d,3.5*p,0)) self.pad.append(point(d,3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SLEEP',line=s)) # # pin 17 # self.shape = add(self.shape,translate(cube(-.06,.06,-.09,.09,0,0),0,0,0)) self.pad.append(point(0,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) class LED_3014_1100(part): # # Luminus MP-3014-1100-50-80 # def __init__(self,value=''): anode = cube(-.011,.011,-.027,.027,0,0) cathode = cube(-.036,.036,-.027,.027,0,0) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # anode # self.shape = translate(anode,-.047,0,0) self.pad.append(point(-.047,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A')) # # cathode # self.shape = add(self.shape,translate(cathode,.022,0,0)) self.pad.append(point(.022,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'C')) class CMM4030D261I2STR(part): # # CUI CMM-4030D-261-I2S-TR I2S microphone # def __init__(self,value=''): pad = cube(-.018,.018,-.011,.011,0,0) self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] s = 0.004 # # pin 1 # self.shape = translate(pad,.037,-.059,0) self.pad.append(point(.037,-.059,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND.',line=s)) # # pin 2 # self.shape = add(self.shape,translate(pad,.037,-.019,0)) self.pad.append(point(.037,-.019,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'N/C',line=s)) # # pin 3 # self.shape = add(self.shape,translate(pad,.037,.019,0)) self.pad.append(point(.037,.019,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'WS',line=s)) # # pin 4 # self.shape = add(self.shape,translate(pad,.037,.059,0)) self.pad.append(point(.037,.059,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'EN',line=s)) # # pin 5 # self.shape = add(self.shape,translate(pad,-.037,.059,0)) self.pad.append(point(-.037,.059,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'L/R',line=s)) # # pin 6 # self.shape = add(self.shape,translate(pad,-.037,.019,0)) self.pad.append(point(-.037,.019,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK',line=s)) # # pin 7 # self.shape = add(self.shape,translate(pad,-.037,-.019,0)) self.pad.append(point(-.037,-.019,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SD',line=s)) # # pin 8 # self.shape = add(self.shape,translate(pad,-.037,-.059,0)) self.pad.append(point(-.037,-.059,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD',line=s)) class SPG08P4HM4H(part): # # Knowles SPG08P4HM4H-1 PDM microphone # def __init__(self,value=''): pad = cube(-.011,.011,-.011,.011,0,0) self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] s = 0.004 # # pin 1 # self.shape = translate(pad,.023,-.037,0) self.pad.append(point(.023,-.037,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V.',line=s)) # # pin 2 # self.shape = add(self.shape,translate(pad,.023,0,0)) self.pad.append(point(.023,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=s)) # # pin 3 # self.shape = add(self.shape,translate(pad,.023,.037,0)) self.pad.append(point(.023,.037,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DAT',line=s)) # # pin 4 # self.shape = add(self.shape,translate(pad,-.023,.037,0)) self.pad.append(point(-.023,.037,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CK',line=s)) # # pin 5 # self.shape = add(self.shape,translate(pad,-.023,0,0)) self.pad.append(point(-.023,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=s)) # # pin 6 # self.shape = add(self.shape,translate(pad,-.023,-.037,0)) self.pad.append(point(-.023,-.037,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SEL',line=s)) class VEML6040(part): # # Vishay VEML6040 color sensor # def __init__(self,value=''): pad12 = cube(-.016,.019,-.006,.006,0,0) pad3 = cube(-.023,.016,-.006,.006,0,0) pad4 = cube(-.019,.016,-.006,.006,0,0) self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] s = 0.004 # # pin 1 # self.shape = translate(pad12,-.039,.014,0) self.pad.append(point(-.039,.014,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1GND',line=s)) # # pin 2 # self.shape = add(self.shape,translate(pad12,-.039,-.014,0)) self.pad.append(point(-.039,-.014,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA',line=s)) # # pin 3 # self.shape = add(self.shape,translate(pad3,.039,-.014,0)) self.pad.append(point(.039,-.014,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL',line=s)) # # pin 4 # self.shape = add(self.shape,translate(pad4,.039,.014,0)) self.pad.append(point(.039,.014,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD',line=s)) class D_1206(part): # # 1206 diode # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # anode # self.shape = translate(pad_1206,-.06,0,0) self.pad.append(point(-.055,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A')) # # cathode # self.shape = add(self.shape,translate(pad_1206,.06,0,0)) self.pad.append(point(.055,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'C')) class LED_1206(part): # # 1206 LED # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # anode # self.shape = translate(pad_1206,-.06,0,0) self.pad.append(point(-.055,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A')) # # cathode # self.shape = add(self.shape,translate(pad_1206,.06,0,0)) self.pad.append(point(.055,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'C')) pad_RGB = cube(-.02,.02,-.029,.029,0,0) class LED_RGB(part): # # CREE CLV1A-FKB # def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] dx = .029 dy = .059 # # pin 1: red # self.shape = translate(pad_RGB,-dx,-dy,0) self.shape = add(self.shape,cylinder(-dx,-dy-.029,0,0,.02)) self.pad.append(point(-dx,-dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'R')) # # pin 2: anode # self.shape = add(self.shape,translate(pad_RGB,dx,-dy,0)) self.pad.append(point(dx,-dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A')) # # pin 3: blue # self.shape = add(self.shape,translate(pad_RGB,dx,dy,0)) self.pad.append(point(dx,dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'B')) # # pin 4: green # self.shape = add(self.shape,translate(pad_RGB,-dx,dy,0)) self.pad.append(point(-dx,dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) class WS2812B(part): # # WS2812B RGB LED # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] padl = cube(-0.06,0,-0.02,0.02,0,0) padr = cube(0,0.06,-0.02,0.02,0,0) # # pin 1 # self.shape = translate(padl,-0.067,0.065,0) self.pad.append(point(-0.096,0.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.V')) # # pin 2 # self.shape = add(self.shape,translate(padl,-0.067,-0.065,0)) self.pad.append(point(-0.096,-0.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DOUT')) # # pin 3 # self.shape = add(self.shape,translate(padr,0.067,-0.065,0)) self.pad.append(point(0.096,-0.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(padr,0.067,0.065,0)) self.pad.append(point(0.096,0.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIN')) class WS2812B_vinyl(part): # # WS2812B RGB LED vinyl cutter larger pads # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] padl = cube(-0.08,0,-0.04,0.04,0,0) padr = cube(0,0.08,-0.04,0.04,0,0) # # pin 1 # self.shape = translate(padl,-0.067,0.065,0) self.pad.append(point(-0.096,0.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.V')) # # pin 2 # self.shape = add(self.shape,translate(padl,-0.067,-0.065,0)) self.pad.append(point(-0.096,-0.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DOUT')) # # pin 3 # self.shape = add(self.shape,translate(padr,0.067,-0.065,0)) self.pad.append(point(0.096,-0.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(padr,0.067,0.065,0)) self.pad.append(point(0.096,0.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIN')) class phototransistor_1206(part): # # 1206 phototransistor # OPTEK 520,521 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # collector # self.shape = translate(pad_1206,-.06,0,0) self.pad.append(point(-.055,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'C')) # # emitter # self.shape = add(self.shape,translate(pad_1206,.06,0,0)) self.pad.append(point(.055,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'E')) pad_PLCC2 = cube(-.029,.029,-.059,.059,0,0) class phototransistor_PLCC2(part): # # PLCC2 phototransistor # Optek OP580 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # collector # self.shape = translate(pad_PLCC2,-.065,0,0) self.pad.append(point(-.065,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'C')) # # emitter # self.shape = add(self.shape,translate(pad_PLCC2,.065,0,0)) self.pad.append(point(.065,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'E')) pad_SOD_123 = cube(-.02,.02,-.024,.024,0,0) class D_SOD_123(part): # # SOD-123 diode # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # anode # self.shape = translate(pad_SOD_123,-.07,0,0) self.pad.append(point(-.07,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A')) # # cathode # self.shape = add(self.shape,translate(pad_SOD_123,.07,0,0)) self.pad.append(point(.07,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'C')) pad_SOT323 = cube(-.47/2/25.4,.47/2/25.4,-.6/2/25.4,.6/2/25.4,0,0) class NMOSFET_SOT323(part): # # Diodes Incorporated DMG1012UW-7 # def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] dx = 0.65/25.4 dy = (1.3/2+0.6/2)/25.4 # # pin 1: gate # self.shape = translate(pad_SOT323,-dx,-dy,0) self.pad.append(point(-dx,-dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=0.004)) # # pin 2: source # self.shape = add(self.shape,translate(pad_SOT323,dx,-dy,0)) self.pad.append(point(dx,-dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'S',line=0.004)) # # pin 3: drain # self.shape = add(self.shape,translate(pad_SOT323,0,dy,0)) self.pad.append(point(0,dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'D',line=0.004)) pad_SOT23 = cube(-.02,.02,-.012,.012,0,0) class NMOSFET_SOT23(part): # # Fairchild NDS355AN # def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] # # pin 1: gate # self.shape = translate(pad_SOT23,.045,-.0375,0) self.pad.append(point(.045,-.0375,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 2: source # self.shape = add(self.shape,translate(pad_SOT23,.045,.0375,0)) self.pad.append(point(.045,.0375,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'S')) # # pin 3: drain # self.shape = add(self.shape,translate(pad_SOT23,-.045,0,0)) self.pad.append(point(-.045,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'D')) class PMOSFET_SOT23(part): # # Fairchild NDS356AP # def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] # # pin 1: gate # self.shape = translate(pad_SOT23,.045,-.0375,0) self.pad.append(point(.045,-.0375,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 2: source # self.shape = add(self.shape,translate(pad_SOT23,.045,.0375,0)) self.pad.append(point(.045,.0375,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'S')) # # pin 3: drain # self.shape = add(self.shape,translate(pad_SOT23,-.045,0,0)) self.pad.append(point(-.045,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'D')) class NMOSFET_TO252AA(part): # # Fairchild RFD16N05LSM # def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] # # pin 1: gate # self.shape = translate(cube(-.031,.031,-.059,.059,0,0),-.090,0,0) self.pad.append(point(-.090,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G 1')) # # pin 2: source # self.shape = add(self.shape,translate(cube(-.031,.031,-.059,.059,0,0),.090,0,0)) self.pad.append(point(.090,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'S')) # # pin 3: drain # self.shape = add(self.shape,translate(cube(-.132,.132,-.132,.132,0,0),0,.261,0)) self.pad.append(point(0,.261,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'D')) class Hall_SOT23(part): # # Allegro A1324 # def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] # # pin 1: output # self.shape = translate(pad_SOT23,-.045,.0375,0) self.pad.append(point(-.045,.0375,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vcc')) # # pin 2: input # self.shape = add(self.shape,translate(pad_SOT23,-.045,-.0375,0)) self.pad.append(point(-.045,-.0375,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'out')) # # pin 3: ground # self.shape = add(self.shape,translate(pad_SOT23,.045,0,0)) self.pad.append(point(.045,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'gnd')) class regulator_SOT23(part): # # TI LM3480IM3 # def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] # # pin 1: output # self.shape = translate(pad_SOT23,-.045,.0375,0) self.pad.append(point(-.045,.0375,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'out')) # # pin 2: input # self.shape = add(self.shape,translate(pad_SOT23,-.045,-.0375,0)) self.pad.append(point(-.045,-.0375,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'in')) # # pin 3: ground # self.shape = add(self.shape,translate(pad_SOT23,.045,0,0)) self.pad.append(point(.045,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'gnd')) class regulator_SOT223(part): # # Zetex ZLDO1117, AZ1117IH # def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] pad_SOT223 = cube(-.02,.02,-.03,.03,0,0) pad_SOT223_ground = cube(-.065,.065,-.03,.03,0,0) # # pin 1: GND # self.shape = translate(pad_SOT223,-.09,-.12,0) self.pad.append(point(-.09,-.12,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.G')) # # pin 2: output # self.shape = add(self.shape,translate(pad_SOT223,0,-.12,0)) self.pad.append(point(0,-.12,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'O')) # # pin 3: input # self.shape = add(self.shape,translate(pad_SOT223,.09,-.12,0)) self.pad.append(point(.09,-.12,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'I')) # # pin 4: output # self.shape = add(self.shape,translate(pad_SOT223_ground,0,.12,0)) self.pad.append(point(0,.12,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'out')) class A4949LJ(part): # # Allegro BLDC driver # def __init__(self,value=''): pad = cube(-1.75/25.4/2,1.75/25.4/2,-0.65/25.4/2,0.65/25.4/2,0,0) dx = 5.6/25.4/2 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad,-dx,.075,0) self.pad.append(point(-dx,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND.')) # # pin 2 # self.shape = add(self.shape,translate(pad,-dx,.025,0)) self.pad.append(point(-dx,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'OUTA')) # # pin 3 # self.shape = add(self.shape,translate(pad,-dx,-.025,0)) self.pad.append(point(-dx,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VBB')) # # pin 4 # self.shape = add(self.shape,translate(pad,-dx,-.075,0)) self.pad.append(point(-dx,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PWM')) # # pin 5 # self.shape = add(self.shape,translate(pad,dx,-.075,0)) self.pad.append(point(dx,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VREF')) # # pin 6 # self.shape = add(self.shape,translate(pad,dx,-.025,0)) self.pad.append(point(dx,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'FG')) # # pin 7 # self.shape = add(self.shape,translate(pad,dx,.025,0)) self.pad.append(point(dx,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'OUTC')) # # pin 8 # self.shape = add(self.shape,translate(pad,dx,.075,0)) self.pad.append(point(dx,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'OUTB')) # # thermal pad # self.shape = add(self.shape,cube(-2.41/25.4/2,2.41/25.4/2,-3.3/25.4/2,3.3/25.4/2,0,0)) class TB67H451A(part): def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: GND # self.shape = translate(pad_SOIC,-.11,.075,0) self.shape = add(self.shape,cylinder(-.153,.075,0,0,.015)) self.pad.append(point(-.11,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND.')) # # pin 2: IN2 # self.shape = add(self.shape,translate(pad_SOIC,-.11,.025,0)) self.pad.append(point(-.11,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IN2')) # # pin 3: IN1 # self.shape = add(self.shape,translate(pad_SOIC,-.11,-.025,0)) self.pad.append(point(-.11,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IN1')) # # pin 4: VREF # self.shape = add(self.shape,translate(pad_SOIC,-.11,-.075,0)) self.pad.append(point(-.11,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VREF')) # # pin 5: VBB # self.shape = add(self.shape,translate(pad_SOIC,.11,-.075,0)) self.pad.append(point(.11,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VBB')) # # pin 6: OUT1 # self.shape = add(self.shape,translate(pad_SOIC,.11,-.025,0)) self.pad.append(point(.11,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'OUT1')) # # pin 7: LSS # self.shape = add(self.shape,translate(pad_SOIC,.11,.025,0)) self.pad.append(point(.11,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'LSS')) # # pin 8: OUT2 # self.shape = add(self.shape,translate(pad_SOIC,.11,.075,0)) self.pad.append(point(.11,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'OUT2')) # # thermal pad # self.shape = add(self.shape,rectangle(-.04,.04,-.075,.075)) class A4953_SOICN(part): def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: GND # self.shape = translate(pad_SOIC,-.11,.075,0) self.shape = add(self.shape,cylinder(-.153,.075,0,0,.015)) self.pad.append(point(-.11,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2: IN2 # self.shape = add(self.shape,translate(pad_SOIC,-.11,.025,0)) self.pad.append(point(-.11,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IN2')) # # pin 3: IN1 # self.shape = add(self.shape,translate(pad_SOIC,-.11,-.025,0)) self.pad.append(point(-.11,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IN1')) # # pin 4: VREF # self.shape = add(self.shape,translate(pad_SOIC,-.11,-.075,0)) self.pad.append(point(-.11,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VREF')) # # pin 5: VBB # self.shape = add(self.shape,translate(pad_SOIC,.11,-.075,0)) self.pad.append(point(.11,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VBB')) # # pin 6: OUT1 # self.shape = add(self.shape,translate(pad_SOIC,.11,-.025,0)) self.pad.append(point(.11,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'OUT1')) # # pin 7: LSS # self.shape = add(self.shape,translate(pad_SOIC,.11,.025,0)) self.pad.append(point(.11,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'LSS')) # # pin 8: OUT2 # self.shape = add(self.shape,translate(pad_SOIC,.11,.075,0)) self.pad.append(point(.11,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'OUT2')) # # thermal pad # self.shape = add(self.shape,rectangle(-.04,.04,-.075,.075)) pad_SM8 = cube(-.035,.035,-.016,.016,0,0) class H_bridge_SM8(part): # # Zetex ZXMHC3A01T8 # def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] d = .13 # # pin 1: G3 (right N gate) # self.shape = translate(pad_SM8,-d,.09,0) self.shape = add(self.shape,cylinder(-d-.035,.09,0,0,.016)) self.pad.append(point(-d,.09,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GRN')) # # pin 2: S2 S3 (N source) # self.shape = add(self.shape,translate(pad_SM8,-d,.03,0)) self.pad.append(point(-d,.03,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SN')) # # pin 3: G2 (left N gate) # self.shape = add(self.shape,translate(pad_SM8,-d,-.03,0)) self.pad.append(point(-d,-.03,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GLN')) # # pin 4: G1 (left P gate) # self.shape = add(self.shape,translate(pad_SM8,-d,-.09,0)) self.pad.append(point(-d,-.09,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GLP')) # # pin 5: D1 D2 (left drain) # self.shape = add(self.shape,translate(pad_SM8,d,-.09,0)) self.pad.append(point(d,-.09,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DL')) # # pin 6: S1 S4 (P source) # self.shape = add(self.shape,translate(pad_SM8,d,-.03,0)) self.pad.append(point(d,-.03,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SP')) # # pin 7: D3 D4 (right drain) # self.shape = add(self.shape,translate(pad_SM8,d,.03,0)) self.pad.append(point(d,.03,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DR')) # # pin 8: G4 (right N gate) # self.shape = add(self.shape,translate(pad_SM8,d,.09,0)) self.pad.append(point(d,.09,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GRP')) pad_mic = cylinder(0,0,0,0,.02) class mic_SPU0414HR5H(part): # # Knowles SPU0414HR5H-SB # def __init__(self,value=''): s = 0.004 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: Vdd # self.shape = translate(pad_mic,.033,.048,0) self.pad.append(point(.033,.048,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V1',line=s)) # # pin 2: GND # self.shape = add(self.shape,translate(pad_mic,.033,-.048,0)) self.pad.append(point(.033,-.048,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) # # pin 3: gain # self.shape = add(self.shape,translate(pad_mic,-.033,-.048,0)) self.pad.append(point(-.033,-.048,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'gain',line=s)) # # pin 4: out # self.shape = add(self.shape,translate(pad_mic,-.033,.048,0)) self.pad.append(point(-.033,.048,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'out',line=s)) class mic_SPM1437(part): # # Knowles SPM1437HM4H-B # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_mic,-.046,.065,0) #self.shape = add(self.shape,cylinder(-.183,.075,0,0,.015)) self.pad.append(point(-.046,.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 2 # self.shape = add(self.shape,translate(pad_mic,-.046,0,0)) self.pad.append(point(-.046,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SEL')) # # pin 3 # self.shape = add(self.shape,translate(pad_mic,-.046,-.065,0)) self.pad.append(point(-.046,-.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 4 # self.shape = add(self.shape,translate(pad_mic,.046,-.065,0)) self.pad.append(point(.046,-.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CLK')) # # pin 5 # self.shape = add(self.shape,translate(pad_mic,.046,0,0)) self.pad.append(point(.046,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DAT')) # # pin 6 # self.shape = add(self.shape,translate(pad_mic,.046,.065,0)) self.shape = add(self.shape,translate(pad_mic,.038,.057,0)) self.pad.append(point(.046,.065,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) pad_accel = cube(-.03,.03,-.0125,.0125,0,0) pad_accel90 = cube(-.0125,.0125,-.03,.03,0,0) class accel_MXD6235M(part): # # MEMSIC MXD6235M # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_accel,-.1,.05,0) self.shape = add(self.shape,cylinder(-.13,.05,0,0,.0125)) self.pad.append(point(-.1,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD')) # # pin 2 # self.shape = add(self.shape,translate(pad_accel,-.1,0,0)) self.pad.append(point(-.1,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TP')) # # pin 3 # self.shape = add(self.shape,translate(pad_accel,-.1,-.05,0)) self.pad.append(point(-.1,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 4 # self.shape = add(self.shape,translate(pad_accel90,0,-.1,0)) self.pad.append(point(0,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC')) # # pin 5 # self.shape = add(self.shape,translate(pad_accel,.1,-.05,0)) self.pad.append(point(.1,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC')) # # pin 6 # self.shape = add(self.shape,translate(pad_accel,.1,0,0)) self.pad.append(point(.1,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Y')) # # pin 7 # self.shape = add(self.shape,translate(pad_accel,.1,.05,0)) self.pad.append(point(.1,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'X')) # # pin 8 # self.shape = add(self.shape,translate(pad_accel90,0,.1,0)) self.pad.append(point(0,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V')) # # ground plane # self.shape = add(self.shape,cube(-.05,.05,-.05,.05,0,0)) pad_cc_14_1 = cube(-.014,.014,-.0075,.0075,0,0) pad_cc_14_1_90 = cube(-.0075,.0075,-.014,.014,0,0) class ADXL343(part): # # ADI ADXL343 accelerometer # def __init__(self,value=''): d = 0.8/25.4 w = 1.01/25.4 s = 0.004 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_cc_14_1,-w,2.5*d,0) self.pad.append(point(-w,2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,"VD1",line=s)) # # pin 2 # self.shape = add(self.shape,translate(pad_cc_14_1,-w,1.5*d,0)) self.pad.append(point(-w,1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) # # pin 3 # self.shape = add(self.shape,translate(pad_cc_14_1,-w,.5*d,0)) self.pad.append(point(-w,.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RSV',line=s)) # # pin 4 # self.shape = add(self.shape,translate(pad_cc_14_1,-w,-.5*d,0)) self.pad.append(point(-w,-.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) # # pin 5 # self.shape = add(self.shape,translate(pad_cc_14_1,-w,-1.5*d,0)) self.pad.append(point(-w,-1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) # # pin 6 # self.shape = add(self.shape,translate(pad_cc_14_1,-w,-2.5*d,0)) self.pad.append(point(-w,-2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VS',line=s)) # # pin 7 # self.shape = add(self.shape,translate(pad_cc_14_1_90,0,-2.5*d,0)) self.pad.append(point(0,-2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-CS',angle=90,line=s)) # # pin 8 # self.shape = add(self.shape,translate(pad_cc_14_1,w,-2.5*d,0)) self.pad.append(point(w,-2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'INT1',line=s)) # # pin 9 # self.shape = add(self.shape,translate(pad_cc_14_1,w,-1.5*d,0)) self.pad.append(point(w,-1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'INT2',line=s)) # # pin 10 # self.shape = add(self.shape,translate(pad_cc_14_1,w,-.5*d,0)) self.pad.append(point(w,-.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC',line=s)) # # pin 11 # self.shape = add(self.shape,translate(pad_cc_14_1,w,.5*d,0)) self.pad.append(point(w,.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RSV',line=s)) # # pin 12 # self.shape = add(self.shape,translate(pad_cc_14_1,w,1.5*d,0)) self.pad.append(point(w,1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'ALT',line=s)) # # pin 13 # self.shape = add(self.shape,translate(pad_cc_14_1,w,2.5*d,0)) self.pad.append(point(w,2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA',line=s)) # # pin 14 # self.shape = add(self.shape,translate(pad_cc_14_1_90,0,2.5*d,0)) self.pad.append(point(0,2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL',angle=90,line=s)) class VL53L1X(part): # # ST VL53L1X time of flight sensor # def __init__(self,value=''): pad = cube(-.0075,.0075,-.0075,.0075,0,0) d = 0.8/25.4 w = 0.8/25.4 s = 0.004 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad,-w,-2*d,0) self.pad.append(point(-w,-2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,"1V",line=s)) # # pin 2 # self.shape = add(self.shape,translate(pad,-w,-1*d,0)) self.pad.append(point(-w,-1*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=s)) # # pin 3 # self.shape = add(self.shape,translate(pad,-w,0*d,0)) self.pad.append(point(-w,0*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=s)) # # pin 4 # self.shape = add(self.shape,translate(pad,-w,1*d,0)) self.pad.append(point(-w,1*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=s)) # # pin 5 # self.shape = add(self.shape,translate(pad,-w,2*d,0)) self.pad.append(point(-w,2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'XS',line=s)) # # pin 6 # self.shape = add(self.shape,translate(pad,0,2*d,0)) self.pad.append(point(0,2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=s)) # # pin 7 # self.shape = add(self.shape,translate(pad,w,2*d,0)) self.pad.append(point(w,2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IO',line=s)) # # pin 8 # self.shape = add(self.shape,translate(pad,w,1*d,0)) self.pad.append(point(w,1*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'NC',line=s)) # # pin 9 # self.shape = add(self.shape,translate(pad,w,0*d,0)) self.pad.append(point(w,0*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDA',line=s)) # # pin 10 # self.shape = add(self.shape,translate(pad,w,-1*d,0)) self.pad.append(point(w,-1*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCL',line=s)) # # pin 11 # self.shape = add(self.shape,translate(pad,w,-2*d,0)) self.pad.append(point(w,-2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V',line=s)) # # pin 12 # self.shape = add(self.shape,translate(pad,0,-2*d,0)) self.pad.append(point(0,-2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=s)) ############################################################ # ICs ############################################################ class ICS43434_6049(part): # # Adafruit 6049 ICS-43434 I2S microphone breakout through-hole # def __init__(self,value,zb,zt): pad_header = cylinder(0,0,zb,zt,.04) pad_hole = cylinder(0,0,zb,zt,.018) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.25,0) self.holes = translate(pad_hole,0,.25,0) self.pad.append(point(0,.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SEL')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.15,0)) self.holes = add(self.holes,translate(pad_hole,0,.15,0)) self.pad.append(point(0,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'LRCL')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.05,0)) self.holes = add(self.holes,translate(pad_hole,0,.05,0)) self.pad.append(point(0,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DOUT')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.05,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.05,0)) self.pad.append(point(0,-0.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'BCLK')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-0.15,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.15,0)) self.pad.append(point(0,-0.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-0.25,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.25,0)) self.pad.append(point(0,-0.25,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3V')) class MAX98357A_3006(part): # # Adafruit 3006 MAX98357A I2S amp breakout through-hole # def __init__(self,value,zb,zt): pad_header = cylinder(0,0,zb,zt,.04) pad_hole = cylinder(0,0,zb,zt,.018) self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1 # self.shape = translate(pad_header,0,.30,0) self.holes = translate(pad_hole,0,.30,0) self.pad.append(point(0,.30,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'LRC')) # # pin 2 # self.shape = add(self.shape,translate(pad_header,0,.20,0)) self.holes = add(self.holes,translate(pad_hole,0,.20,0)) self.pad.append(point(0,.20,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'BCLK')) # # pin 3 # self.shape = add(self.shape,translate(pad_header,0,.10,0)) self.holes = add(self.holes,translate(pad_hole,0,.10,0)) self.pad.append(point(0,.10,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIN')) # # pin 4 # self.shape = add(self.shape,translate(pad_header,0,-0.00,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.00,0)) self.pad.append(point(0,-0.00,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GAIN')) # # pin 5 # self.shape = add(self.shape,translate(pad_header,0,-0.10,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.10,0)) self.pad.append(point(0,-0.10,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SD')) # # pin 6 # self.shape = add(self.shape,translate(pad_header,0,-0.20,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.20,0)) self.pad.append(point(0,-0.20,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 7 # self.shape = add(self.shape,translate(pad_header,0,-0.30,0)) self.holes = add(self.holes,translate(pad_hole,0,-0.30,0)) self.pad.append(point(0,-0.30,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIN')) class SN74LVC3G14DCTR(part): # # triple Schmidt inverter SSOP # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] w = 1.1/25.4/2 h = 0.26/25.4/2 d = 3.8/25.4/2 p = 0.65/25.4 pad = cube(-w,w,-h,h,0,0) s = 0.003 # # pin 1 # self.shape = translate(pad,-d,1.5*p,0) self.pad.append(point(-d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.1A',line=s,angle=0)) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,0.5*p,0)) self.pad.append(point(-d,0.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3Y',line=s,angle=0)) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,-0.5*p,0)) self.pad.append(point(-d,-0.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2A',line=s,angle=0)) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,-1.5*p,0)) self.pad.append(point(-d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=s,angle=0)) # # pin 5 # self.shape = add(self.shape,translate(pad,d,-1.5*p,0)) self.pad.append(point(d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'2Y',line=s,angle=0)) # # pin 6 # self.shape = add(self.shape,translate(pad,d,-0.5*p,0)) self.pad.append(point(d,-0.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3A',line=s,angle=0)) # # pin 7 # self.shape = add(self.shape,translate(pad,d,0.5*p,0)) self.pad.append(point(d,0.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1Y',line=s,angle=0)) # # pin 8 # self.shape = add(self.shape,translate(pad,d,1.5*p,0)) self.pad.append(point(d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V',line=s,angle=0)) class TLV365DBVR(part): # # op-amp SOT-23-5 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] w = 1.1/25.4/2 h = 0.5/25.4/2 d = 2.6/25.4/2 p = 0.95/25.4 pad = cube(-w,w,-h,h,0,0) s = 0.003 # # pin 1 # self.shape = translate(pad,-d,p,0) self.pad.append(point(-d,p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Vo',line=s,angle=90)) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,0,0)) self.pad.append(point(-d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V-',line=s,angle=90)) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,-p,0)) self.pad.append(point(-d,-p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'I+',line=s,angle=90)) # # pin 4 # self.shape = add(self.shape,translate(pad,d,-p,0)) self.pad.append(point(d,-p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'I-',line=s,angle=90)) # # pin 5 # self.shape = add(self.shape,translate(pad,d,p,0)) self.pad.append(point(d,p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V+',line=s,angle=90)) class SN74LVC1G14DCKR(part): # # single Schmidt trigger inverter SOT-353 SC-70-5 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] w = 0.95/25.4/2 h = 0.25/25.4/2 d = 2.2/25.4/2 p = 0.65/25.4 pad = cube(-w,w,-h,h,0,0) s = 0.003 # # pin 1 # self.shape = translate(pad,-d,p,0) self.pad.append(point(-d,p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'N',line=s,angle=90)) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,0,0)) self.pad.append(point(-d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A',line=s,angle=90)) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,-p,0)) self.pad.append(point(-d,-p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'G',line=s,angle=90)) # # pin 4 # self.shape = add(self.shape,translate(pad,d,-p,0)) self.pad.append(point(d,-p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Y',line=s,angle=90)) # # pin 5 # self.shape = add(self.shape,translate(pad,d,p,0)) self.pad.append(point(d,p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V',line=s,angle=90)) class TLV3601DBVR(part): # # TLV3601DBVR # TI comparator SOT23-5 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 1.325/25.4 w = 0.5/25.4/2 h = 0.75/25.4/2 p = 0.95/25.4 pad = cube(-w,w,-h,h,0,0) s = 0.003 # # pin 1 # self.shape = translate(pad,-p,-d,0) self.shape = add(self.shape,cylinder(-p,-d-h,0,0,w)) self.pad.append(point(-p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'OUT',line=s,angle=90)) # # pin 2 # self.shape = add(self.shape,translate(pad,0,-d,0)) self.pad.append(point(0,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s,angle=90)) # # pin 3 # self.shape = add(self.shape,translate(pad,p,-d,0)) self.pad.append(point(p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IN+',line=s,angle=90)) # # pin 4 # self.shape = add(self.shape,translate(pad,p,d,0)) self.pad.append(point(p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IN-',line=s,angle=90)) # # pin 5 # self.shape = add(self.shape,translate(pad,-p,d,0)) self.pad.append(point(-p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC',line=s,angle=90)) class PicoW(part): # # Pico W # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] board_width = 22.58/25.4 pad_width = 3.2/25.4 pad_height = 0.08 pad_pitch = 0.1 pad_offset = pad_width/4 pad_left = cube(0,pad_width,-pad_height/2,pad_height/2,0,0) pad_right = cube(-pad_width,0,-pad_height/2,pad_height/2,0,0) label_offset = pad_width/2 self.shape = '0' # 1-10 for i in range(10): self.shape = add(self.shape,translate(pad_left,-board_width/2-pad_offset,(9.5-i)*pad_pitch,0)) self.pad.append(point(-board_width/2-pad_offset,(9.5-i)*pad_pitch)) self.labels.append(self.text(self.pad[-1].x+label_offset,self.pad[-1].y,self.pad[-1].z,str(i+1))) # 11-20 for i in range(10): self.shape = add(self.shape,translate(pad_left,-board_width/2-pad_offset,-(0.5+i)*pad_pitch,0)) self.pad.append(point(-board_width/2-pad_offset,-(0.5+i)*pad_pitch)) self.labels.append(self.text(self.pad[-1].x+label_offset,self.pad[-1].y,self.pad[-1].z,str(11+i))) # 21-30 for i in range(10): self.shape = add(self.shape,translate(pad_right,board_width/2+pad_offset,-(9.5-i)*pad_pitch,0)) self.pad.append(point(board_width/2+pad_offset,-(9.5-i)*pad_pitch)) self.labels.append(self.text(self.pad[-1].x-label_offset,self.pad[-1].y,self.pad[-1].z,str(21+i))) # 31-40 for i in range(10): self.shape = add(self.shape,translate(pad_right,board_width/2+pad_offset,(0.5+i)*pad_pitch,0)) self.pad.append(point(board_width/2+pad_offset,(0.5+i)*pad_pitch)) self.labels.append(self.text(self.pad[-1].x-label_offset,self.pad[-1].y,self.pad[-1].z,str(31+i))) class XIAO_SAMD21(part): # # XIAO SAMD21 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] padl = cube(-0.04,0.081,-0.070/2,0.070/2,0,0) padr = cube(-0.081,0.04,-0.070/2,0.070/2,0,0) pitch = 0.1 dx = 0.035 width = 0.685 length = 0.798 d = 0.015 l = 0.004 # text # # pin 1 # self.shape = translate(padl,-width/2,3*pitch,0) self.pad.append(point(-width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D0')) # # pin 2 # self.shape = add(self.shape,translate(padl,-width/2,2*pitch,0)) self.pad.append(point(-width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D1')) # # pin 3 # self.shape = add(self.shape,translate(padl,-width/2,1*pitch,0)) self.pad.append(point(-width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D2')) # # pin 4 # self.shape = add(self.shape,translate(padl,-width/2,0*pitch,0)) self.pad.append(point(-width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D3')) # # pin 5 # self.shape = add(self.shape,translate(padl,-width/2,-1*pitch,0)) self.pad.append(point(-width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 6 # self.shape = add(self.shape,translate(padl,-width/2,-2*pitch,0)) self.pad.append(point(-width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 7 # self.shape = add(self.shape,translate(padl,-width/2,-3*pitch,0)) self.pad.append(point(-width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'TX')) # # pin 8 # self.shape = add(self.shape,translate(padr,width/2,-3*pitch,0)) self.pad.append(point(width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'RX')) # # pin 9 # self.shape = add(self.shape,translate(padr,width/2,-2*pitch,0)) self.pad.append(point(width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 10 # self.shape = add(self.shape,translate(padr,width/2,-1*pitch,0)) self.pad.append(point(width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDI')) # # pin 11 # self.shape = add(self.shape,translate(padr,width/2,0*pitch,0)) self.pad.append(point(width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDO')) # # pin 12 # self.shape = add(self.shape,translate(padr,width/2,1*pitch,0)) self.pad.append(point(width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'3V3')) # # pin 13 # self.shape = add(self.shape,translate(padr,width/2,2*pitch,0)) self.pad.append(point(width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 14 # self.shape = add(self.shape,translate(padr,width/2,3*pitch,0)) self.pad.append(point(width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'5V')) # # JTAG # dw = 0.047 left = 0.27 right = 0.27 top = 0.050 bottom = 0.20 pad = cube(-dw/2,dw/2,-dw/2,dw/2,0,0) # self.shape = add(self.shape,translate(pad,-width/2+left+dw/2,length/2-bottom+dw/2,0)) self.pad.append(point(-width/2+left+dw/2,length/2-bottom+dw/2)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # self.shape = add(self.shape,translate(pad,-width/2+left+dw/2,length/2-top-dw/2,0)) self.pad.append(point(-width/2+left+dw/2,length/2-top-dw/2)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # self.shape = add(self.shape,translate(pad,width/2-right-dw/2,length/2-bottom+dw/2,0)) self.pad.append(point(width/2-right-dw/2,length/2-bottom+dw/2)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # self.shape = add(self.shape,translate(pad,width/2-right-dw/2,length/2-top-dw/2,0)) self.pad.append(point(width/2-right-dw/2,length/2-top-dw/2)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'')) # # battery # dx = 0.042 dy = 0.081 left = 0.27 right = 0.27 bottom = 0.020 pad = cube(-dx/2,dx/2,-dy/2,dy/2,0,0) # self.shape = add(self.shape,translate(pad,-width/2+left+dx/2,-length/2+bottom+dy/2,0)) self.pad.append(point(-width/2+left+dx/2,-length/2+bottom+dy/2)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIN')) # self.shape = add(self.shape,translate(pad,width/2-right-dx/2,-length/2+bottom+dy/2,0)) self.pad.append(point(width/2-right-dx/2,-length/2+bottom+dy/2)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class XIAO_ESP32S3(part): # # XIAO ESP32S3 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] padl = cube(-0.04,0.081,-0.070/2,0.070/2,0,0) padr = cube(-0.081,0.04,-0.070/2,0.070/2,0,0) pitch = 0.1 dx = 0.035 width = 0.685 length = 0.798 d = 0.015 l = 0.004 # text # # pin 1 # self.shape = translate(padl,-width/2,3*pitch,0) self.pad.append(point(-width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D0')) # # pin 2 # self.shape = add(self.shape,translate(padl,-width/2,2*pitch,0)) self.pad.append(point(-width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D1')) # # pin 3 # self.shape = add(self.shape,translate(padl,-width/2,1*pitch,0)) self.pad.append(point(-width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D2')) # # pin 4 # self.shape = add(self.shape,translate(padl,-width/2,0*pitch,0)) self.pad.append(point(-width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D3')) # # pin 5 # self.shape = add(self.shape,translate(padl,-width/2,-1*pitch,0)) self.pad.append(point(-width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 6 # self.shape = add(self.shape,translate(padl,-width/2,-2*pitch,0)) self.pad.append(point(-width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 7 # self.shape = add(self.shape,translate(padl,-width/2,-3*pitch,0)) self.pad.append(point(-width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'TX')) # # pin 8 # self.shape = add(self.shape,translate(padr,width/2,-3*pitch,0)) self.pad.append(point(width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'RX')) # # pin 9 # self.shape = add(self.shape,translate(padr,width/2,-2*pitch,0)) self.pad.append(point(width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 10 # self.shape = add(self.shape,translate(padr,width/2,-1*pitch,0)) self.pad.append(point(width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDI')) # # pin 11 # self.shape = add(self.shape,translate(padr,width/2,0*pitch,0)) self.pad.append(point(width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDO')) # # pin 12 # self.shape = add(self.shape,translate(padr,width/2,1*pitch,0)) self.pad.append(point(width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'3V3')) # # pin 13 # self.shape = add(self.shape,translate(padr,width/2,2*pitch,0)) self.pad.append(point(width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 14 # self.shape = add(self.shape,translate(padr,width/2,3*pitch,0)) self.pad.append(point(width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'5V')) # # JTAG # dw = 0.052 left = 0.297 right = 0.399 top = 0.064 dy = 0.099 pad = cube(-dw/2,dw/2,-dw/2,dw/2,0,0) # self.shape = add(self.shape,translate(pad,-width/2+left,length/2-top,0)) self.pad.append(point(-width/2+left,length/2-top)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MTDI',line=l)) # self.shape = add(self.shape,translate(pad,-width/2+right,length/2-top,0)) self.pad.append(point(-width/2+right,length/2-top)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MTDO',line=l)) # self.shape = add(self.shape,translate(pad,-width/2+left,length/2-top-dy,0)) self.pad.append(point(-width/2+left,length/2-top-dy)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'EN',line=l)) # self.shape = add(self.shape,translate(pad,-width/2+right,length/2-top-dy,0)) self.pad.append(point(-width/2+right,length/2-top-dy)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=l)) # self.shape = add(self.shape,translate(pad,-width/2+left,length/2-top-2*dy,0)) self.pad.append(point(-width/2+left,length/2-top-2*dy)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MTMS',line=l)) # self.shape = add(self.shape,translate(pad,-width/2+right,length/2-top-2*dy,0)) self.pad.append(point(-width/2+right,length/2-top-2*dy)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MTCK',line=l)) # self.shape = add(self.shape,translate(pad,-width/2+left,length/2-top-3*dy,0)) self.pad.append(point(-width/2+left,length/2-top-3*dy)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'D-',line=l)) # self.shape = add(self.shape,translate(pad,-width/2+right,length/2-top-3*dy,0)) self.pad.append(point(-width/2+right,length/2-top-3*dy)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'D+',line=l)) # # battery # dx = 0.084 dy = 0.045 left = 0.124 topm = 0.283 topp = 0.359 pad = cube(-dx/2,dx/2,-dy/2,dy/2,0,0) # self.shape = add(self.shape,translate(pad,-width/2+left+dx/2,length/2-topm-dy/2,0)) self.pad.append(point(-width/2+left+dx/2,length/2-topm-dy/2)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-')) # self.shape = add(self.shape,translate(pad,-width/2+left+dx/2,length/2-topp-dy/2,0)) self.pad.append(point(-width/2+left+dx/2,length/2-topp-dy/2)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'+')) # # thermal # left = 0.333 top = 0.429 dx = 0.108 dy = 0.100 pad = cube(-dx/2,dx/2,-dy/2,dy/2,0,0) # self.shape = add(self.shape,translate(pad,-width/2+left+dx/2,length/2-top-dy/2,0)) self.pad.append(point(-width/2+left+dx/2,length/2-top-dy/2)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'thermal',line=l)) class XIAO_ESP32C3(part): # # XIAO ESP32C3 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] padl = cube(-0.04,0.081,-0.070/2,0.070/2,0,0) padr = cube(-0.081,0.04,-0.070/2,0.070/2,0,0) pitch = 0.1 dx = 0.035 width = 0.685 length = 0.798 d = 0.015 # # pin 1 # self.shape = translate(padl,-width/2,3*pitch,0) self.pad.append(point(-width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D0')) # # pin 2 # self.shape = add(self.shape,translate(padl,-width/2,2*pitch,0)) self.pad.append(point(-width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D1')) # # pin 3 # self.shape = add(self.shape,translate(padl,-width/2,1*pitch,0)) self.pad.append(point(-width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D2')) # # pin 4 # self.shape = add(self.shape,translate(padl,-width/2,0*pitch,0)) self.pad.append(point(-width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D3')) # # pin 5 # self.shape = add(self.shape,translate(padl,-width/2,-1*pitch,0)) self.pad.append(point(-width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 6 # self.shape = add(self.shape,translate(padl,-width/2,-2*pitch,0)) self.pad.append(point(-width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 7 # self.shape = add(self.shape,translate(padl,-width/2,-3*pitch,0)) self.pad.append(point(-width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'TX')) # # pin 8 # self.shape = add(self.shape,translate(padr,width/2,-3*pitch,0)) self.pad.append(point(width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'RX')) # # pin 9 # self.shape = add(self.shape,translate(padr,width/2,-2*pitch,0)) self.pad.append(point(width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 10 # self.shape = add(self.shape,translate(padr,width/2,-1*pitch,0)) self.pad.append(point(width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDI')) # # pin 11 # self.shape = add(self.shape,translate(padr,width/2,0*pitch,0)) self.pad.append(point(width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDO')) # # pin 12 # self.shape = add(self.shape,translate(padr,width/2,1*pitch,0)) self.pad.append(point(width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'3V3')) # # pin 13 # self.shape = add(self.shape,translate(padr,width/2,2*pitch,0)) self.pad.append(point(width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 14 # self.shape = add(self.shape,translate(padr,width/2,3*pitch,0)) self.pad.append(point(width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'5V')) # # thermal # self.shape = add(self.shape,cube( width/2-.304-d, width/2-.197+d, length/2-.475-d, length/2-.369+d, 0,0)) self.pad.append(point( width/2-.197-(.304-.197)/2, length/2-.369-(.475-.369)/2, 0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'thermal')) # # + # self.shape = add(self.shape,cube( width/2-.555-d, width/2-.477+d, length/2-.402-d, length/2-.362, 0,0)) self.pad.append(point( width/2-.477-(.555-.477)/2, length/2-.362-(.402-.362)/2, 0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'+')) # # - # self.shape = add(self.shape,cube( width/2-.555-d, width/2-.477+d, length/2-.331, length/2-.291+d, 0,0)) self.pad.append(point( width/2-.477-(.555-.477)/2, length/2-.291-(.331-.291)/2, 0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-')) # # prog # self.shape = add(self.shape,cube( width/2-.312-d, width/2-.271+d, length/2-.086, length/2-.043+d, 0,0)) self.pad.append(point( width/2-.271-(.312-.271)/2, length/2-.043-(.086-.043)/2, 0)) # self.shape = add(self.shape,cube( width/2-.413-d, width/2-.368+d, length/2-.086, length/2-.043+d, 0,0)) self.pad.append(point( width/2-.368-(.413-.368)/2, length/2-.043-(.086-.043)/2, 0)) # self.shape = add(self.shape,cube( width/2-.312-d, width/2-.271+d, length/2-.186, length/2-.143+d, 0,0)) self.pad.append(point( width/2-.271-(.312-.271)/2, length/2-.143-(.186-.143)/2, 0)) # self.shape = add(self.shape,cube( width/2-.413-d, width/2-.368+d, length/2-.186, length/2-.143+d, 0,0)) self.pad.append(point( width/2-.368-(.413-.368)/2, length/2-.143-(.186-.143)/2, 0)) # self.shape = add(self.shape,cube( width/2-.312-d, width/2-.271+d, length/2-.286, length/2-.243+d, 0,0)) self.pad.append(point( width/2-.271-(.312-.271)/2, length/2-.243-(.286-.243)/2, 0)) # self.shape = add(self.shape,cube( width/2-.413-d, width/2-.368+d, length/2-.286, length/2-.243+d, 0,0)) self.pad.append(point( width/2-.368-(.413-.368)/2, length/2-.243-(.286-.243)/2, 0)) class XIAO_RP2040(part): # # XIAO RP2040 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] padl = cube(-0.04,0.081,-0.070/2,0.070/2,0,0) padr = cube(-0.081,0.04,-0.070/2,0.070/2,0,0) pitch = 0.1 dx = 0.035 width = 0.699 length = 0.818 d = 0.015 # # pin 1 # self.shape = translate(padl,-width/2,3*pitch,0) self.pad.append(point(-width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D0')) # # pin 2 # self.shape = add(self.shape,translate(padl,-width/2,2*pitch,0)) self.pad.append(point(-width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D1')) # # pin 3 # self.shape = add(self.shape,translate(padl,-width/2,1*pitch,0)) self.pad.append(point(-width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D2')) # # pin 4 # self.shape = add(self.shape,translate(padl,-width/2,0*pitch,0)) self.pad.append(point(-width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D3')) # # pin 5 # self.shape = add(self.shape,translate(padl,-width/2,-1*pitch,0)) self.pad.append(point(-width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 6 # self.shape = add(self.shape,translate(padl,-width/2,-2*pitch,0)) self.pad.append(point(-width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 7 # self.shape = add(self.shape,translate(padl,-width/2,-3*pitch,0)) self.pad.append(point(-width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'TX')) # # pin 8 # self.shape = add(self.shape,translate(padr,width/2,-3*pitch,0)) self.pad.append(point(width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'RX')) # # pin 9 # self.shape = add(self.shape,translate(padr,width/2,-2*pitch,0)) self.pad.append(point(width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 10 # self.shape = add(self.shape,translate(padr,width/2,-1*pitch,0)) self.pad.append(point(width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDI')) # # pin 11 # self.shape = add(self.shape,translate(padr,width/2,0*pitch,0)) self.pad.append(point(width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDO')) # # pin 12 # self.shape = add(self.shape,translate(padr,width/2,1*pitch,0)) self.pad.append(point(width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'3V3')) # # pin 13 # self.shape = add(self.shape,translate(padr,width/2,2*pitch,0)) self.pad.append(point(width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 14 # self.shape = add(self.shape,translate(padr,width/2,3*pitch,0)) self.pad.append(point(width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'5V')) # # VIN # self.shape = add(self.shape,cube( width/2-.418-d, width/2-.376+d, length/2-.798-d, length/2-.714+d, 0,0)) self.pad.append(point( width/2-.376-(.418-.376)/2, length/2-.714-(.798-.714)/2, 0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIN')) # # GND # self.shape = add(self.shape,cube( width/2-.317-d, width/2-.275+d, length/2-.798-d, length/2-.714+d, 0,0)) self.pad.append(point( width/2-.275-(.317-.275)/2, length/2-.714-(.798-.714)/2, 0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # prog # self.shape = add(self.shape,cube( width/2-.320-d, width/2-.276+d, length/2-.107-d, length/2-.060+d, 0,0)) self.pad.append(point( width/2-.276-(.320-.276)/2, length/2-.060-(.107-.060)/2, 0)) # self.shape = add(self.shape,cube( width/2-.424-d, width/2-.376+d, length/2-.107-d, length/2-.060+d, 0,0)) self.pad.append(point( width/2-.376-(.424-.376)/2, length/2-.060-(.107-.060)/2, 0)) self.shape = add(self.shape,cube( width/2-.424-d, width/2-.376+d, length/2-.209-d, length/2-.161+d, 0,0)) self.pad.append(point( width/2-.376-(.424-.376)/2, length/2-.161-(.209-.161)/2, 0)) # self.shape = add(self.shape,cube( width/2-.320-d, width/2-.276+d, length/2-.209-d, length/2-.161+d, 0,0)) self.pad.append(point( width/2-.276-(.320-.276)/2, length/2-.161-(.209-.161)/2, 0)) class XIAO_RP2040_vinyl(part): # # XIAO RP2040 vinyl cutter larger pads # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] padl = cube(-0.06,0.081,-0.070/2,0.070/2,0,0) padr = cube(-0.081,0.06,-0.070/2,0.070/2,0,0) pitch = 0.1 dx = 0.035 width = 0.699 length = 0.818 d = 0.015 # # pin 1 # self.shape = translate(padl,-width/2,3*pitch,0) self.pad.append(point(-width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D0')) # # pin 2 # self.shape = add(self.shape,translate(padl,-width/2,2*pitch,0)) self.pad.append(point(-width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D1')) # # pin 3 # self.shape = add(self.shape,translate(padl,-width/2,1*pitch,0)) self.pad.append(point(-width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D2')) # # pin 4 # self.shape = add(self.shape,translate(padl,-width/2,0*pitch,0)) self.pad.append(point(-width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'D3')) # # pin 5 # self.shape = add(self.shape,translate(padl,-width/2,-1*pitch,0)) self.pad.append(point(-width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SDA')) # # pin 6 # self.shape = add(self.shape,translate(padl,-width/2,-2*pitch,0)) self.pad.append(point(-width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'SCL')) # # pin 7 # self.shape = add(self.shape,translate(padl,-width/2,-3*pitch,0)) self.pad.append(point(-width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x+dx,self.pad[-1].y,self.pad[-1].z,'TX')) # # pin 8 # self.shape = add(self.shape,translate(padr,width/2,-3*pitch,0)) self.pad.append(point(width/2,-3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'RX')) # # pin 9 # self.shape = add(self.shape,translate(padr,width/2,-2*pitch,0)) self.pad.append(point(width/2,-2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 10 # self.shape = add(self.shape,translate(padr,width/2,-1*pitch,0)) self.pad.append(point(width/2,-1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDI')) # # pin 11 # self.shape = add(self.shape,translate(padr,width/2,0*pitch,0)) self.pad.append(point(width/2,0*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'SDO')) # # pin 12 # self.shape = add(self.shape,translate(padr,width/2,1*pitch,0)) self.pad.append(point(width/2,1*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'3V3')) # # pin 13 # self.shape = add(self.shape,translate(padr,width/2,2*pitch,0)) self.pad.append(point(width/2,2*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'G')) # # pin 14 # self.shape = add(self.shape,translate(padr,width/2,3*pitch,0)) self.pad.append(point(width/2,3*pitch,0)) self.labels.append(self.text(self.pad[-1].x-dx,self.pad[-1].y,self.pad[-1].z,'5V')) # # VIN # self.shape = add(self.shape,cube( width/2-.418-d, width/2-.376+d, length/2-.798-d, length/2-.714+d, 0,0)) self.pad.append(point( width/2-.376-(.418-.376)/2, length/2-.714-(.798-.714)/2, 0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIN')) # # GND # self.shape = add(self.shape,cube( width/2-.317-d, width/2-.275+d, length/2-.798-d, length/2-.714+d, 0,0)) self.pad.append(point( width/2-.275-(.317-.275)/2, length/2-.714-(.798-.714)/2, 0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # prog # self.shape = add(self.shape,cube( width/2-.320-d, width/2-.276+d, length/2-.107-d, length/2-.060+d, 0,0)) self.pad.append(point( width/2-.276-(.320-.276)/2, length/2-.060-(.107-.060)/2, 0)) # self.shape = add(self.shape,cube( width/2-.424-d, width/2-.376+d, length/2-.107-d, length/2-.060+d, 0,0)) self.pad.append(point( width/2-.376-(.424-.376)/2, length/2-.060-(.107-.060)/2, 0)) self.shape = add(self.shape,cube( width/2-.424-d, width/2-.376+d, length/2-.209-d, length/2-.161+d, 0,0)) self.pad.append(point( width/2-.376-(.424-.376)/2, length/2-.161-(.209-.161)/2, 0)) # self.shape = add(self.shape,cube( width/2-.320-d, width/2-.276+d, length/2-.209-d, length/2-.161+d, 0,0)) self.pad.append(point( width/2-.276-(.320-.276)/2, length/2-.161-(.209-.161)/2, 0)) class AVRDB28(part): # # AVR*DB28 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 9.01/2/25.4 # spacing w = 0.4/2/25.4 # width h = 1.4/2/25.4 # height p = 0.8/25.4 # pitch l = 0.004 # text pad = cube(-h,h,-w,w,0,0) padv = cube(-w,w,-h,h,0,0) # # pin 1 # self.shape = translate(pad,-d,3.5*p,0) self.shape = add(self.shape,cylinder(-d-h,3.5*p,0,0,w)) self.pad.append(point(-d,3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.PA3',line=l)) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,2.5*p,0)) self.pad.append(point(-d,2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA4',line=l)) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,1.5*p,0)) self.pad.append(point(-d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA5',line=l)) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,.5*p,0)) self.pad.append(point(-d,.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA6',line=l)) # # pin 5 # self.shape = add(self.shape,translate(pad,-d,-.5*p,0)) self.pad.append(point(-d,-.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA7',line=l)) # # pin 6 # self.shape = add(self.shape,translate(pad,-d,-1.5*p,0)) self.pad.append(point(-d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC0',line=l)) # # pin 7 # self.shape = add(self.shape,translate(pad,-d,-2.5*p,0)) self.pad.append(point(-d,-2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC1',line=l)) # # pin 8 # self.shape = add(self.shape,translate(pad,-d,-3.5*p,0)) self.pad.append(point(-d,-3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC2',line=l)) # # pin 9 # self.shape = add(self.shape,translate(padv,-3.5*p,-d,0)) self.pad.append(point(-3.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC3',line=l,angle=-90)) # # pin 10 # self.shape = add(self.shape,translate(padv,-2.5*p,-d,0)) self.pad.append(point(-2.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIO2',line=l,angle=-90)) # # pin 11 # self.shape = add(self.shape,translate(padv,-1.5*p,-d,0)) self.pad.append(point(-1.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD1',line=l,angle=-90)) # # pin 12 # self.shape = add(self.shape,translate(padv,-.5*p,-d,0)) self.pad.append(point(-.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD2',line=l,angle=-90)) # # pin 13 # self.shape = add(self.shape,translate(padv,.5*p,-d,0)) self.pad.append(point(.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD3',line=l,angle=-90)) # # pin 14 # self.shape = add(self.shape,translate(padv,1.5*p,-d,0)) self.pad.append(point(1.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD4',line=l,angle=-90)) # # pin 15 # self.shape = add(self.shape,translate(padv,2.5*p,-d,0)) self.pad.append(point(2.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD5',line=l,angle=-90)) # # pin 16 # self.shape = add(self.shape,translate(padv,3.5*p,-d,0)) self.pad.append(point(3.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD6',line=l,angle=-90)) # # pin 17 # self.shape = add(self.shape,translate(pad,d,-3.5*p,0)) self.pad.append(point(d,-3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD7',line=l)) # # pin 18 # self.shape = add(self.shape,translate(pad,d,-2.5*p,0)) self.pad.append(point(d,-2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'AVDD',line=l)) # # pin 19 # self.shape = add(self.shape,translate(pad,d,-1.5*p,0)) self.pad.append(point(d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=l)) # # pin 20 # self.shape = add(self.shape,translate(pad,d,-.5*p,0)) self.pad.append(point(d,-.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PF0',line=l)) # # pin 21 # self.shape = add(self.shape,translate(pad,d,.5*p,0)) self.pad.append(point(d,.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PF1',line=l)) # # pin 22 # self.shape = add(self.shape,translate(pad,d,1.5*p,0)) self.pad.append(point(d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PF2',line=l)) # # pin 23 # self.shape = add(self.shape,translate(pad,d,2.5*p,0)) self.pad.append(point(d,2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PF3',line=l)) # # pin 24 # self.shape = add(self.shape,translate(pad,d,3.5*p,0)) self.pad.append(point(d,3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PF4',line=l)) # # pin 25 # self.shape = add(self.shape,translate(padv,3.5*p,d,0)) self.pad.append(point(3.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PF5',line=l,angle=-90)) # # pin 26 # self.shape = add(self.shape,translate(padv,2.5*p,d,0)) self.pad.append(point(2.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PF6',line=l,angle=-90)) # # pin 27 # self.shape = add(self.shape,translate(padv,1.5*p,d,0)) self.pad.append(point(1.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'UPDI',line=l,angle=-90)) # # pin 28 # self.shape = add(self.shape,translate(padv,.5*p,d,0)) self.pad.append(point(.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD',line=l,angle=-90)) # # pin 29 # self.shape = add(self.shape,translate(padv,-.5*p,d,0)) self.pad.append(point(-.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=l,angle=-90)) # # pin 30 # self.shape = add(self.shape,translate(padv,-1.5*p,d,0)) self.pad.append(point(-1.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA0',line=l,angle=-90)) # # pin 31 # self.shape = add(self.shape,translate(padv,-2.5*p,d,0)) self.pad.append(point(-2.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA1',line=l,angle=-90)) # # pin 32 # self.shape = add(self.shape,translate(padv,-3.5*p,d,0)) self.pad.append(point(-3.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA2',line=l,angle=-90)) class ATtiny3216(part): # # SOIC-20 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 9.82/2/25.4 w = .63/2/25.4 h = 1.9/2/25.4 pad = cube(-h,h,-w,w,0,0) # # pin 1 # self.shape = translate(pad,-d,.225,0) self.shape = add(self.shape,cylinder(-d-h,.225,0,0,w)) self.pad.append(point(-d,.225,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1VCC')) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,.175,0)) self.pad.append(point(-d,.175,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA4')) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,.125,0)) self.pad.append(point(-d,.125,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA5')) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,.075,0)) self.pad.append(point(-d,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA6')) # # pin 5 # self.shape = add(self.shape,translate(pad,-d,.025,0)) self.pad.append(point(-d,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA7')) # # pin 6 # self.shape = add(self.shape,translate(pad,-d,-.025,0)) self.pad.append(point(-d,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB5')) # # pin 7 # self.shape = add(self.shape,translate(pad,-d,-.075,0)) self.pad.append(point(-d,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB4')) # # pin 8 # self.shape = add(self.shape,translate(pad,-d,-.125,0)) self.pad.append(point(-d,-.125,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB3')) # # pin 9 # self.shape = add(self.shape,translate(pad,-d,-.175,0)) self.pad.append(point(-d,-.175,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB2')) # # pin 10 # self.shape = add(self.shape,translate(pad,-d,-.225,0)) self.pad.append(point(-d,-.225,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB1')) # # pin 11 # self.shape = add(self.shape,translate(pad,d,-.225,0)) self.pad.append(point(d,-.225,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB0')) # # pin 12 # self.shape = add(self.shape,translate(pad,d,-.175,0)) self.pad.append(point(d,-.175,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC0')) # # pin 13 # self.shape = add(self.shape,translate(pad,d,-.125,0)) self.pad.append(point(d,-.125,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC1')) # # pin 14 # self.shape = add(self.shape,translate(pad,d,-.075,0)) self.pad.append(point(d,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC2')) # # pin 15 # self.shape = add(self.shape,translate(pad,d,-.025,0)) self.pad.append(point(d,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC3')) # # pin 16 # self.shape = add(self.shape,translate(pad,d,.025,0)) self.pad.append(point(d,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'UPDI')) # # pin 17 # self.shape = add(self.shape,translate(pad,d,.075,0)) self.pad.append(point(d,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA1')) # # pin 18 # self.shape = add(self.shape,translate(pad,d,.125,0)) self.pad.append(point(d,.125,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA2')) # # pin 19 # self.shape = add(self.shape,translate(pad,d,.175,0)) self.pad.append(point(d,.175,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA3')) # # pin 20 # self.shape = add(self.shape,translate(pad,d,.225,0)) self.pad.append(point(d,.225,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class SAMD21E(part): # # TQFP # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 9.01/2/25.4 # spacing w = 0.4/2/25.4 # width h = 1.4/2/25.4 # height p = 0.8/25.4 # pitch l = 0.004 # text pad = cube(-h,h,-w,w,0,0) padv = cube(-w,w,-h,h,0,0) # # pin 1 # self.shape = translate(pad,-d,3.5*p,0) self.shape = add(self.shape,cylinder(-d-h,3.5*p,0,0,w)) self.pad.append(point(-d,3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.A0',line=l)) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,2.5*p,0)) self.pad.append(point(-d,2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A01',line=l)) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,1.5*p,0)) self.pad.append(point(-d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A02',line=l)) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,.5*p,0)) self.pad.append(point(-d,.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A03',line=l)) # # pin 5 # self.shape = add(self.shape,translate(pad,-d,-.5*p,0)) self.pad.append(point(-d,-.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A04',line=l)) # # pin 6 # self.shape = add(self.shape,translate(pad,-d,-1.5*p,0)) self.pad.append(point(-d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A05',line=l)) # # pin 7 # self.shape = add(self.shape,translate(pad,-d,-2.5*p,0)) self.pad.append(point(-d,-2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A06',line=l)) # # pin 8 # self.shape = add(self.shape,translate(pad,-d,-3.5*p,0)) self.pad.append(point(-d,-3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A07',line=l)) # # pin 9 # self.shape = add(self.shape,translate(padv,-3.5*p,-d,0)) self.pad.append(point(-3.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VAN',line=l,angle=-90)) # # pin 10 # self.shape = add(self.shape,translate(padv,-2.5*p,-d,0)) self.pad.append(point(-2.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=l,angle=-90)) # # pin 11 # self.shape = add(self.shape,translate(padv,-1.5*p,-d,0)) self.pad.append(point(-1.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A08',line=l,angle=-90)) # # pin 12 # self.shape = add(self.shape,translate(padv,-.5*p,-d,0)) self.pad.append(point(-.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A09',line=l,angle=-90)) # # pin 13 # self.shape = add(self.shape,translate(padv,.5*p,-d,0)) self.pad.append(point(.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A10',line=l,angle=-90)) # # pin 14 # self.shape = add(self.shape,translate(padv,1.5*p,-d,0)) self.pad.append(point(1.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A11',line=l,angle=-90)) # # pin 15 # self.shape = add(self.shape,translate(padv,2.5*p,-d,0)) self.pad.append(point(2.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A14',line=l,angle=-90)) # # pin 16 # self.shape = add(self.shape,translate(padv,3.5*p,-d,0)) self.pad.append(point(3.5*p,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A15',line=l,angle=-90)) # # pin 17 # self.shape = add(self.shape,translate(pad,d,-3.5*p,0)) self.pad.append(point(d,-3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A16',line=l)) # # pin 18 # self.shape = add(self.shape,translate(pad,d,-2.5*p,0)) self.pad.append(point(d,-2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A17',line=l)) # # pin 19 # self.shape = add(self.shape,translate(pad,d,-1.5*p,0)) self.pad.append(point(d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A18',line=l)) # # pin 20 # self.shape = add(self.shape,translate(pad,d,-.5*p,0)) self.pad.append(point(d,-.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A19',line=l)) # # pin 21 # self.shape = add(self.shape,translate(pad,d,.5*p,0)) self.pad.append(point(d,.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A22',line=l)) # # pin 22 # self.shape = add(self.shape,translate(pad,d,1.5*p,0)) self.pad.append(point(d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A23',line=l)) # # pin 23 # self.shape = add(self.shape,translate(pad,d,2.5*p,0)) self.pad.append(point(d,2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'24-',line=l)) # # pin 24 # self.shape = add(self.shape,translate(pad,d,3.5*p,0)) self.pad.append(point(d,3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'25+',line=l)) # # pin 25 # self.shape = add(self.shape,translate(padv,3.5*p,d,0)) self.pad.append(point(3.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A27',line=l,angle=-90)) # # pin 26 # self.shape = add(self.shape,translate(padv,2.5*p,d,0)) self.pad.append(point(2.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST',line=l,angle=-90)) # # pin 27 # self.shape = add(self.shape,translate(padv,1.5*p,d,0)) self.pad.append(point(1.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A28',line=l,angle=-90)) # # pin 28 # self.shape = add(self.shape,translate(padv,.5*p,d,0)) self.pad.append(point(.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=l,angle=-90)) # # pin 29 # self.shape = add(self.shape,translate(padv,-.5*p,d,0)) self.pad.append(point(-.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCR',line=l,angle=-90)) # # pin 30 # self.shape = add(self.shape,translate(padv,-1.5*p,d,0)) self.pad.append(point(-1.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIN',line=l,angle=-90)) # # pin 31 # self.shape = add(self.shape,translate(padv,-2.5*p,d,0)) self.pad.append(point(-2.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CLK',line=l,angle=-90)) # # pin 32 # self.shape = add(self.shape,translate(padv,-3.5*p,d,0)) self.pad.append(point(-3.5*p,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIO',line=l,angle=-90)) class SAMD11D(part): # # SOIC-20 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 9.82/2/25.4 w = .63/2/25.4 h = 1.9/2/25.4 pad = cube(-h,h,-w,w,0,0) # # pin 1 # self.shape = translate(pad,-d,.225,0) self.shape = add(self.shape,cylinder(-d-h,.225,0,0,w)) self.pad.append(point(-d,.225,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1A05')) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,.175,0)) self.pad.append(point(-d,.175,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A06')) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,.125,0)) self.pad.append(point(-d,.125,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A07')) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,.075,0)) self.pad.append(point(-d,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A08')) # # pin 5 # self.shape = add(self.shape,translate(pad,-d,.025,0)) self.pad.append(point(-d,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A09')) # # pin 6 # self.shape = add(self.shape,translate(pad,-d,-.025,0)) self.pad.append(point(-d,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A14')) # # pin 7 # self.shape = add(self.shape,translate(pad,-d,-.075,0)) self.pad.append(point(-d,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A15')) # # pin 8 # self.shape = add(self.shape,translate(pad,-d,-.125,0)) self.pad.append(point(-d,-.125,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A16')) # # pin 9 # self.shape = add(self.shape,translate(pad,-d,-.175,0)) self.pad.append(point(-d,-.175,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A22')) # # pin 10 # self.shape = add(self.shape,translate(pad,-d,-.225,0)) self.pad.append(point(-d,-.225,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A23')) # # pin 11 # self.shape = add(self.shape,translate(pad,d,-.225,0)) self.pad.append(point(d,-.225,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 12 # self.shape = add(self.shape,translate(pad,d,-.175,0)) self.pad.append(point(d,-.175,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CLK')) # # pin 13 # self.shape = add(self.shape,translate(pad,d,-.125,0)) self.pad.append(point(d,-.125,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIO')) # # pin 14 # self.shape = add(self.shape,translate(pad,d,-.075,0)) self.pad.append(point(d,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'24-')) # # pin 15 # self.shape = add(self.shape,translate(pad,d,-.025,0)) self.pad.append(point(d,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'25+')) # # pin 16 # self.shape = add(self.shape,translate(pad,d,.025,0)) self.pad.append(point(d,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 17 # self.shape = add(self.shape,translate(pad,d,.075,0)) self.pad.append(point(d,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 18 # self.shape = add(self.shape,translate(pad,d,.125,0)) self.pad.append(point(d,.125,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A02')) # # pin 19 # self.shape = add(self.shape,translate(pad,d,.175,0)) self.pad.append(point(d,.175,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A03')) # # pin 20 # self.shape = add(self.shape,translate(pad,d,.225,0)) self.pad.append(point(d,.225,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A04')) class ATtiny1624_SOIC(part): # # ATtiny1624-SS # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 0.11 w = 0.015 h = .03 pad = cube(-h,h,-w,w,0,0) # # pin 1 # self.shape = translate(pad,-d,.15,0) self.shape = add(self.shape,cylinder(-d-h,.15,0,0,w)) self.pad.append(point(-d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.VCC')) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,.1,0)) self.pad.append(point(-d,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA4')) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,.050,0)) self.pad.append(point(-d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA5')) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,0,0)) self.pad.append(point(-d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA6')) # # pin 5 # self.shape = add(self.shape,translate(pad,-d,-.05,0)) self.pad.append(point(-d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA7')) # # pin 6 # self.shape = add(self.shape,translate(pad,-d,-.1,0)) self.pad.append(point(-d,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB3')) # # pin 7 # self.shape = add(self.shape,translate(pad,-d,-.15,0)) self.pad.append(point(-d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB2')) # # pin 8 # self.shape = add(self.shape,translate(pad,d,-.15,0)) self.pad.append(point(d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB1')) # # pin 9 # self.shape = add(self.shape,translate(pad,d,-.1,0)) self.pad.append(point(d,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB0')) # # pin 10 # self.shape = add(self.shape,translate(pad,d,-.05,0)) self.pad.append(point(d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'UPDI')) # # pin 11 # self.shape = add(self.shape,translate(pad,d,0,0)) self.pad.append(point(d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA1')) # # pin 12 # self.shape = add(self.shape,translate(pad,d,.050,0)) self.pad.append(point(d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA2')) # # pin 13 # self.shape = add(self.shape,translate(pad,d,.1,0)) self.pad.append(point(d,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA3')) # # pin 14 self.shape = add(self.shape,translate(pad,d,.15,0)) self.pad.append(point(d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class ATtiny1624_TSSOP(part): # # ATtiny1624-X # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] p = 0.65/25.4 d = (6.4/2+4.4/2)/2/25.4 w = 0.0099/2 h = (6.4-4.4)/2/25.4 pad = cube(-h,h,-w,w,0,0) l = 0.004 # # pin 1 # self.shape = translate(pad,-d,3*p,0) self.shape = add(self.shape,cylinder(-d-h,3*p,0,0,w)) self.pad.append(point(-d,3*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.VCC',line=l)) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,2*p,0)) self.pad.append(point(-d,2*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA4',line=l)) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,1*p,0)) self.pad.append(point(-d,1*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA5',line=l)) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,0*p,0)) self.pad.append(point(-d,0*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA6',line=l)) # # pin 5 # self.shape = add(self.shape,translate(pad,-d,-1*p,0)) self.pad.append(point(-d,-1*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA7',line=l)) # # pin 6 # self.shape = add(self.shape,translate(pad,-d,-2*p,0)) self.pad.append(point(-d,-2*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB3',line=l)) # # pin 7 # self.shape = add(self.shape,translate(pad,-d,-3*p,0)) self.pad.append(point(-d,-3*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB2',line=l)) # # pin 8 # self.shape = add(self.shape,translate(pad,d,-3*p,0)) self.pad.append(point(d,-3*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB1',line=l)) # # pin 9 # self.shape = add(self.shape,translate(pad,d,-2*p,0)) self.pad.append(point(d,-2*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB0',line=l)) # # pin 10 # self.shape = add(self.shape,translate(pad,d,-1*p,0)) self.pad.append(point(d,-1*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'UPDI',line=l)) # # pin 11 # self.shape = add(self.shape,translate(pad,d,0*p,0)) self.pad.append(point(d,0*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA1',line=l)) # # pin 12 # self.shape = add(self.shape,translate(pad,d,1*p,0)) self.pad.append(point(d,1*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA2',line=l)) # # pin 13 # self.shape = add(self.shape,translate(pad,d,2*p,0)) self.pad.append(point(d,2*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA3',line=l)) # # pin 14 self.shape = add(self.shape,translate(pad,d,3*p,0)) self.pad.append(point(d,3*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=l)) class ATtiny1614(part): # # SOIC # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 0.11 w = 0.015 h = .03 pad = cube(-h,h,-w,w,0,0) # # pin 1 # self.shape = translate(pad,-d,.15,0) self.shape = add(self.shape,cylinder(-d-h,.15,0,0,w)) self.pad.append(point(-d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.VCC')) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,.1,0)) self.pad.append(point(-d,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA4')) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,.050,0)) self.pad.append(point(-d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA5')) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,0,0)) self.pad.append(point(-d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA6')) # # pin 5 # self.shape = add(self.shape,translate(pad,-d,-.05,0)) self.pad.append(point(-d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA7')) # # pin 6 # self.shape = add(self.shape,translate(pad,-d,-.1,0)) self.pad.append(point(-d,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB3')) # # pin 7 # self.shape = add(self.shape,translate(pad,-d,-.15,0)) self.pad.append(point(-d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB2')) # # pin 8 # self.shape = add(self.shape,translate(pad,d,-.15,0)) self.pad.append(point(d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB1')) # # pin 9 # self.shape = add(self.shape,translate(pad,d,-.1,0)) self.pad.append(point(d,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB0')) # # pin 10 # self.shape = add(self.shape,translate(pad,d,-.05,0)) self.pad.append(point(d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'UPDI')) # # pin 11 # self.shape = add(self.shape,translate(pad,d,0,0)) self.pad.append(point(d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA1')) # # pin 12 # self.shape = add(self.shape,translate(pad,d,.050,0)) self.pad.append(point(d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA2')) # # pin 13 # self.shape = add(self.shape,translate(pad,d,.1,0)) self.pad.append(point(d,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA3')) # # pin 14 self.shape = add(self.shape,translate(pad,d,.15,0)) self.pad.append(point(d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class FT230XS(part): def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 0.11 w = 0.0053 h = .03 p = .65/25.4 l = 0.004 pad = cube(-h,h,-w,w,0,0) # # pin 1 # self.shape = translate(pad,-d,3.5*p,0) self.shape = add(self.shape,cylinder(-d-h,3.5*p,0,0,w)) self.pad.append(point(-d,3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1TXD',line=l)) # # pin 2 # self.shape = add(self.shape,translate(pad,-d,2.5*p,0)) self.pad.append(point(-d,2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RTS',line=l)) # # pin 3 # self.shape = add(self.shape,translate(pad,-d,1.5*p,0)) self.pad.append(point(-d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VIO',line=l)) # # pin 4 # self.shape = add(self.shape,translate(pad,-d,.5*p,0)) self.pad.append(point(-d,.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RXD',line=l)) # # pin 5 # self.shape = add(self.shape,translate(pad,-d,-.5*p,0)) self.pad.append(point(-d,-.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=l)) # # pin 6 # self.shape = add(self.shape,translate(pad,-d,-1.5*p,0)) self.pad.append(point(-d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CTS',line=l)) # # pin 7 # self.shape = add(self.shape,translate(pad,-d,-2.5*p,0)) self.pad.append(point(-d,-2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CB2',line=l)) # # pin 8 # self.shape = add(self.shape,translate(pad,-d,-3.5*p,0)) self.pad.append(point(-d,-3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'USP',line=l)) # # pin 9 # self.shape = add(self.shape,translate(pad,d,-3.5*p,0)) self.pad.append(point(d,-3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'USM',line=l)) # # pin 10 # self.shape = add(self.shape,translate(pad,d,-2.5*p,0)) self.pad.append(point(d,-2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'3V3',line=l)) # # pin 11 # self.shape = add(self.shape,translate(pad,d,-1.5*p,0)) self.pad.append(point(d,-1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST',line=l)) # # pin 12 # self.shape = add(self.shape,translate(pad,d,-.5*p,0)) self.pad.append(point(d,-.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC',line=l)) # # pin 13 # self.shape = add(self.shape,translate(pad,d,.5*p,0)) self.pad.append(point(d,.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=l)) # # pin 14 self.shape = add(self.shape,translate(pad,d,1.5*p,0)) self.pad.append(point(d,1.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CB1',line=l)) # # pin 15 # self.shape = add(self.shape,translate(pad,d,2.5*p,0)) self.pad.append(point(d,2.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CB0',line=l)) # # pin 16 self.shape = add(self.shape,translate(pad,d,3.5*p,0)) self.pad.append(point(d,3.5*p,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CB3',line=l)) class ATtiny412(part): # # SOIC150 # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 0.11 w = 0.015 h = .03 pad = cube(-h,h,-w,w,0,0) # # pin 1: VCC # self.shape = translate(pad,-d,.075,0) self.shape = add(self.shape,cylinder(-d-h,.075,0,0,w)) self.pad.append(point(-d,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 2: PA6 # self.shape = add(self.shape,translate(pad,-d,.025,0)) self.pad.append(point(-d,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA6')) # # pin 3: PA7 # self.shape = add(self.shape,translate(pad,-d,-.025,0)) self.pad.append(point(-d,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA7')) # # pin 4: PA1 # self.shape = add(self.shape,translate(pad,-d,-.075,0)) self.pad.append(point(-d,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA1')) # # pin 5: PA2 # self.shape = add(self.shape,translate(pad,d,-.075,0)) self.pad.append(point(d,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA2')) # # pin 6: UPDI # self.shape = add(self.shape,translate(pad,d,-.025,0)) self.pad.append(point(d,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'UPDI')) # # pin 7: PA3 # self.shape = add(self.shape,translate(pad,d,.025,0)) self.pad.append(point(d,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA3')) # # pin 8: GND # self.shape = add(self.shape,translate(pad,d,.075,0)) self.pad.append(point(d,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) class SAMD11C(part): # # SOIC # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] d = 0.11 w = 0.015 h = .03 pad = cube(-h,h,-w,w,0,0) # # pin 1: PA05 # self.shape = translate(pad,-d,.15,0) self.shape = add(self.shape,cylinder(-d-h,.15,0,0,w)) self.pad.append(point(-d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'.A05')) # # pin 2: PA08 # self.shape = add(self.shape,translate(pad,-d,.1,0)) self.pad.append(point(-d,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A08')) # # pin 3: PA09 # self.shape = add(self.shape,translate(pad,-d,.050,0)) self.pad.append(point(-d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A09')) # # pin 4: PA14 # self.shape = add(self.shape,translate(pad,-d,0,0)) self.pad.append(point(-d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A14')) # # pin 5: PA15 # self.shape = add(self.shape,translate(pad,-d,-.05,0)) self.pad.append(point(-d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A15')) # # pin 6: nRESET # self.shape = add(self.shape,translate(pad,-d,-.1,0)) self.pad.append(point(-d,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 7: CLK # self.shape = add(self.shape,translate(pad,-d,-.15,0)) self.pad.append(point(-d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CLK')) # # pin 8: DIO # self.shape = add(self.shape,translate(pad,d,-.15,0)) self.pad.append(point(d,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DIO')) # # pin 9: PA24/D- # self.shape = add(self.shape,translate(pad,d,-.1,0)) self.pad.append(point(d,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'24-')) # # pin 10: PA25/D+ # self.shape = add(self.shape,translate(pad,d,-.05,0)) self.pad.append(point(d,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'25+')) # # pin 11: GND # self.shape = add(self.shape,translate(pad,d,0,0)) self.pad.append(point(d,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 12: VDD # self.shape = add(self.shape,translate(pad,d,.050,0)) self.pad.append(point(d,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD')) # # pin 13: PA02 # self.shape = add(self.shape,translate(pad,d,.1,0)) self.pad.append(point(d,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A02')) # # pin 14: PA04 # self.shape = add(self.shape,translate(pad,d,.15,0)) self.pad.append(point(d,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A04')) pad_SOT23_5 = cube(-.01,.01,-.02,.02,0,0) class op_amp_SOT23_5(part): def __init__(self,value=''): self.value = value self.x = 0 self.y = 0 self.z = 0 self.pad = [point(0,0,0)] self.labels = [] # # pin 1: output # self.shape = translate(pad_SOT23_5,-.0375,-.045,0) self.pad.append(point(-.0375,-.045,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'O')) # # pin 2: V- # self.shape = add(self.shape,translate(pad_SOT23_5,0,-.045,0)) self.pad.append(point(0,-.045,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V-')) # # pin 3: I+ # self.shape = add(self.shape,translate(pad_SOT23_5,.0375,-.045,0)) self.pad.append(point(.0375,-.045,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'I+')) # # pin 4: I- # self.shape = add(self.shape,translate(pad_SOT23_5,.0375,.045,0)) self.pad.append(point(.0375,.045,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'I-')) # # pin 5: V+ # self.shape = add(self.shape,translate(pad_SOT23_5,-.0375,.045,0)) self.pad.append(point(-.0375,.045,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V+')) pad_SOICN = cube(-.035,.035,-.015,.015,0,0) class op_amp_SOICN(part): def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: A out # self.shape = translate(pad_SOICN,-.12,.075,0) self.pad.append(point(-.12,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1 Ao')) # # pin 2: A- # self.shape = add(self.shape,translate(pad_SOICN,-.12,.025,0)) self.pad.append(point(-.12,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A-')) # # pin 3: A+ # self.shape = add(self.shape,translate(pad_SOICN,-.12,-.025,0)) self.pad.append(point(-.12,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'A+')) # # pin 4: V- # self.shape = add(self.shape,translate(pad_SOICN,-.12,-.075,0)) self.pad.append(point(-.12,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V-')) # # pin 5: B+ # self.shape = add(self.shape,translate(pad_SOICN,.12,-.075,0)) self.pad.append(point(.12,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'B+')) # # pin 6: B- # self.shape = add(self.shape,translate(pad_SOICN,.12,-.025,0)) self.pad.append(point(.12,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'B-')) # # pin 7: B out # self.shape = add(self.shape,translate(pad_SOICN,.12,.025,0)) self.pad.append(point(.12,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Bo')) # # pin 8: V+ # self.shape = add(self.shape,translate(pad_SOICN,.12,.075,0)) self.pad.append(point(.12,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'V+')) TSSOP_pad_width = 0.040 TSSOP_pad_height = 0.011 TSSOP_pad_dy = 0.026 TSSOP_pad_dx = 0.120 pad_TSSOP = cube(-TSSOP_pad_width/2.0,TSSOP_pad_width/2.0,-TSSOP_pad_height/2.0,TSSOP_pad_height/2.0,0,0) class TRC102(part): # # RFM TRC102 ISM transceiver # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: SDI # self.shape = translate(pad_TSSOP,-TSSOP_pad_dx,3.5*TSSOP_pad_dy,0) self.pad.append(point(-TSSOP_pad_dx,3.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1 SDI')) # # pin 2: SCK # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,2.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,2.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 3: nCS # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,1.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,1.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'nCS')) # # pin 4: SDO # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,0.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,0.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDO')) # # pin 5: IRQ # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,-0.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,-0.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IRQ')) # # pin 6: DATA/nFSEL # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,-1.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,-1.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DATA')) # # pin 7: CR # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,-2.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,-2.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CR')) # # pin 8: CLKOUT # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,-3.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,-3.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CLKOUT')) # # pin 9: Xtal/Ref # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,-3.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,-3.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Xtal')) # # pin 10: RESET # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,-2.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,-2.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RESET')) # # pin 11: GND # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,-1.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,-1.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 12: RF_P # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,-0.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,-0.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RF_P')) # # pin 13: RF_N # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,0.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,0.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RF_N')) # # pin 14: VDD # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,1.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,1.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD')) # # pin 15: RSSIA # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,2.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,2.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RSSIA')) # # pin 16: nINT/DDET # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,3.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,3.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'nINT')) pad_SOIC = cube(-.041,.041,-.015,.015,0,0) class ATtiny45_SOIC(part): def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: PB5/dW/ADC0/-RESET/PCINT5 # self.shape = translate(pad_SOIC,-.14,.075,0) self.shape = add(self.shape,cylinder(-.183,.075,0,0,.015)) self.pad.append(point(-.14,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST')) # # pin 2: PB3/ADC3/-OC1B/CLKI/XTAL1/PCINT3 # self.shape = add(self.shape,translate(pad_SOIC,-.14,.025,0)) self.pad.append(point(-.14,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB3')) # # pin 3: PB4/ADC2/OC1B/CLKO/XTAL2/PCINT4 # self.shape = add(self.shape,translate(pad_SOIC,-.14,-.025,0)) self.pad.append(point(-.14,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB4')) # # pin 4: GND # self.shape = add(self.shape,translate(pad_SOIC,-.14,-.075,0)) self.pad.append(point(-.14,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 5: PB0/MOSI/DI/SDA/AIN0/OC0A/-OC1A/AREF/PCINT0 # self.shape = add(self.shape,translate(pad_SOIC,.14,-.075,0)) self.pad.append(point(.14,-.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB0')) # # pin 6: PB1/MISO/DO/AIN1/OC0B/OC1A/PCINT1 # self.shape = add(self.shape,translate(pad_SOIC,.14,-.025,0)) self.pad.append(point(.14,-.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB1')) # # pin 7: PB2/SCK/USCK/SCL/ADC1/T0/INT0/PCINT2 # self.shape = add(self.shape,translate(pad_SOIC,.14,.025,0)) self.pad.append(point(.14,.025,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB2')) # # pin 8: VCC # self.shape = add(self.shape,translate(pad_SOIC,.14,.075,0)) self.pad.append(point(.14,.075,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) class ATtiny44_SOICN(part): def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: VCC # self.shape = translate(pad_SOICN,-.12,.15,0) self.shape = add(self.shape,cylinder(-.155,.15,0,0,.015)) self.pad.append(point(-.12,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 2: PB0/XTAL1/PCINT8 # self.shape = add(self.shape,translate(pad_SOICN,-.12,.1,0)) self.pad.append(point(-.12,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB0')) # # pin 3: PB1/XTAL2/PCINT9 # self.shape = add(self.shape,translate(pad_SOICN,-.12,.050,0)) self.pad.append(point(-.12,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB1')) # # pin 4: PB3/dW/-RESET/PCINT11 # self.shape = add(self.shape,translate(pad_SOICN,-.12,0,0)) self.pad.append(point(-.12,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB3')) # # pin 5: PB2/CKOUT/OC0A/INT0/PCINT10 # self.shape = add(self.shape,translate(pad_SOICN,-.12,-.05,0)) self.pad.append(point(-.12,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB2')) # # pin 6: PA7/ADC7/OC0B/ICP/PCINT7 # self.shape = add(self.shape,translate(pad_SOICN,-.12,-.1,0)) self.pad.append(point(-.12,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA7')) # # pin 7: PA6/ADC6/MOSI/SDA/OC1A/PCINT6 # self.shape = add(self.shape,translate(pad_SOICN,-.12,-.15,0)) self.pad.append(point(-.12,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA6')) # # pin 8: PA5/ADC5/DO/MISO/OC1B/PCINT5 # self.shape = add(self.shape,translate(pad_SOICN,.12,-.15,0)) self.pad.append(point(.12,-.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA5')) # # pin 9: PA4/ADC4/USCK/SCL/T1/PCINT4 # self.shape = add(self.shape,translate(pad_SOICN,.12,-.1,0)) self.pad.append(point(.12,-.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA4')) # # pin 10: PA3/ADC3/T0/PCINT3 # self.shape = add(self.shape,translate(pad_SOICN,.12,-.05,0)) self.pad.append(point(.12,-.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA3')) # # pin 11: PA2/ADC2/AIN1/PCINT2 # self.shape = add(self.shape,translate(pad_SOICN,.12,0,0)) self.pad.append(point(.12,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA2')) # # pin 12: PA1/ADC1/AIN0/PCINT1 # self.shape = add(self.shape,translate(pad_SOICN,.12,.050,0)) self.pad.append(point(.12,.05,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA1')) # # pin 13: PA0/ADC0/AREF/PCINT0 # self.shape = add(self.shape,translate(pad_SOICN,.12,.1,0)) self.pad.append(point(.12,.1,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA0')) # # pin 14: GND # self.shape = add(self.shape,translate(pad_SOICN,.12,.15,0)) self.pad.append(point(.12,.15,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) pad_TQFP_h = cube(-.025,.025,-.007,.007,0,0) pad_TQFP_v = cube(-.007,.007,-.025,.025,0,0) class ATxmegaE5_TQFP(part): def __init__(self,value=''): c = .18 d = 0.8/25.4 s = 0.004 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: GND # self.shape = translate(pad_TQFP_h,-c,3.5*d,0) self.pad.append(point(-c,3.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1 GND',line=s)) # # pin 2: PA4 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,2.5*d,0)) self.pad.append(point(-c,2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA4',line=s)) # # pin 3: PA3 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,1.5*d,0)) self.pad.append(point(-c,1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA3',line=s)) # # pin 4: PA2 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,.5*d,0)) self.pad.append(point(-c,.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA2',line=s)) # # pin 5: PA1 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-.5*d,0)) self.pad.append(point(-c,-.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA1',line=s)) # # pin 6: PA0 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-1.5*d,0)) self.pad.append(point(-c,-1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA0',line=s)) # # pin 7: PDI/DATA # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-2.5*d,0)) self.pad.append(point(-c,-2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PDI/DATA',line=s)) # # pin 8: RST/CLOCK # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-3.5*d,0)) self.pad.append(point(-c,-3.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RST/CLOCK',line=s)) # # pin 9: PC7 # self.shape = add(self.shape,translate(pad_TQFP_v,-3.5*d,-c,0)) self.pad.append(point(-3.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC7',angle=90,line=s)) # # pin 10: PC6 # self.shape = add(self.shape,translate(pad_TQFP_v,-2.5*d,-c,0)) self.pad.append(point(-2.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC6',angle=90,line=s)) # # pin 11: PC5 # self.shape = add(self.shape,translate(pad_TQFP_v,-1.5*d,-c,0)) self.pad.append(point(-1.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC5',angle=90,line=s)) # # pin 12: PC4 # self.shape = add(self.shape,translate(pad_TQFP_v,-.5*d,-c,0)) self.pad.append(point(-.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC4',angle=90,line=s)) # # pin 13: PC3 # self.shape = add(self.shape,translate(pad_TQFP_v,.5*d,-c,0)) self.pad.append(point(.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC3',angle=90,line=s)) # # pin 14: PC2 # self.shape = add(self.shape,translate(pad_TQFP_v,1.5*d,-c,0)) self.pad.append(point(1.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC2',angle=90,line=s)) # # pin 15: PC1 # self.shape = add(self.shape,translate(pad_TQFP_v,2.5*d,-c,0)) self.pad.append(point(2.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC1',angle=90,line=s)) # # pin 16: PC0 # self.shape = add(self.shape,translate(pad_TQFP_v,3.5*d,-c,0)) self.pad.append(point(3.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC0',angle=90,line=s)) # # pin 17: VCC # self.shape = add(self.shape,translate(pad_TQFP_h,c,-3.5*d,0)) self.pad.append(point(c,-3.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC',line=s)) # # pin 18: GND # self.shape = add(self.shape,translate(pad_TQFP_h,c,-2.5*d,0)) self.pad.append(point(c,-2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) # # pin 19: PR1 # self.shape = add(self.shape,translate(pad_TQFP_h,c,-1.5*d,0)) self.pad.append(point(c,-1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PR1',line=s)) # # pin 20: PR0 # self.shape = add(self.shape,translate(pad_TQFP_h,c,-.5*d,0)) self.pad.append(point(c,-.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PR0',line=s)) # # pin 21: PD7 # self.shape = add(self.shape,translate(pad_TQFP_h,c,.5*d,0)) self.pad.append(point(c,.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD7',line=s)) # # pin 22: PD6 # self.shape = add(self.shape,translate(pad_TQFP_h,c,1.5*d,0)) self.pad.append(point(c,1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD6',line=s)) # # pin 23: PD5 # self.shape = add(self.shape,translate(pad_TQFP_h,c,2.5*d,0)) self.pad.append(point(c,2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD5',line=s)) # # pin 24: PD4 # self.shape = add(self.shape,translate(pad_TQFP_h,c,3.5*d,0)) self.pad.append(point(c,3.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD4',line=s)) # # pin 25: PD3 # self.shape = add(self.shape,translate(pad_TQFP_v,3.5*d,c,0)) self.pad.append(point(3.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD3',angle=90,line=s)) # # pin 26: PD2 # self.shape = add(self.shape,translate(pad_TQFP_v,2.5*d,c,0)) self.pad.append(point(2.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD2',angle=90,line=s)) # # pin 27: PD1 # self.shape = add(self.shape,translate(pad_TQFP_v,1.5*d,c,0)) self.pad.append(point(1.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD1',angle=90,line=s)) # # pin 28: PD0 # self.shape = add(self.shape,translate(pad_TQFP_v,.5*d,c,0)) self.pad.append(point(.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD0',angle=90,line=s)) # # pin 29: PA7 # self.shape = add(self.shape,translate(pad_TQFP_v,-.5*d,c,0)) self.pad.append(point(-.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA7',angle=90,line=s)) # # pin 30: PA6 # self.shape = add(self.shape,translate(pad_TQFP_v,-1.5*d,c,0)) self.pad.append(point(-1.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA6',angle=90,line=s)) # # pin 31: PA5 # self.shape = add(self.shape,translate(pad_TQFP_v,-2.5*d,c,0)) self.pad.append(point(-2.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA5',angle=90,line=s)) # # pin 32: AVCC # self.shape = add(self.shape,translate(pad_TQFP_v,-3.5*d,c,0)) self.pad.append(point(-3.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'AVCC',angle=90,line=s)) class ATmega88_TQFP(part): def __init__(self,value=''): c = .18 d = .031 s = 0.004 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: PD3/PCINT19/OC2B/INT1 # self.shape = translate(pad_TQFP_h,-c,3.5*d,0) self.pad.append(point(-c,3.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1 PD3',line=s)) # # pin 2: PD4/PCINT20/XCK/T0 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,2.5*d,0)) self.pad.append(point(-c,2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD4',line=s)) # # pin 3: GND # self.shape = add(self.shape,translate(pad_TQFP_h,-c,1.5*d,0)) self.pad.append(point(-c,1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) # # pin 4: VCC # self.shape = add(self.shape,translate(pad_TQFP_h,-c,.5*d,0)) self.pad.append(point(-c,.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC',line=s)) # # pin 5: GND # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-.5*d,0)) self.pad.append(point(-c,-.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) # # pin 6: VCC # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-1.5*d,0)) self.pad.append(point(-c,-1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC',line=s)) # # pin 7: PB6/PCINT6/XTAL1/TOSC1 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-2.5*d,0)) self.pad.append(point(-c,-2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB6',line=s)) # # pin 8: PB7/PCINT7/XTAL2/TOSC2 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-3.5*d,0)) self.pad.append(point(-c,-3.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB7',line=s)) # # pin 9: PD5/PCINT21/OC0B/T1 # self.shape = add(self.shape,translate(pad_TQFP_v,-3.5*d,-c,0)) self.pad.append(point(-3.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD5',angle=90,line=s)) # # pin 10: PD6/PCINT22/OC0A/AIN0 # self.shape = add(self.shape,translate(pad_TQFP_v,-2.5*d,-c,0)) self.pad.append(point(-2.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD6',angle=90,line=s)) # # pin 11: PD7/PCINT23/AIN1 # self.shape = add(self.shape,translate(pad_TQFP_v,-1.5*d,-c,0)) self.pad.append(point(-1.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD7',angle=90,line=s)) # # pin 12: PB0/PCINT0/CLKO/ICP1 # self.shape = add(self.shape,translate(pad_TQFP_v,-.5*d,-c,0)) self.pad.append(point(-.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB0',angle=90,line=s)) # # pin 13: PB1/PCINT1/OC1A # self.shape = add(self.shape,translate(pad_TQFP_v,.5*d,-c,0)) self.pad.append(point(.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB1',angle=90,line=s)) # # pin 14: PB2/PCINT2/-SS/OC1B # self.shape = add(self.shape,translate(pad_TQFP_v,1.5*d,-c,0)) self.pad.append(point(1.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB2',angle=90,line=s)) # # pin 15: PB3/PCINT3/OC2A/MOSI # self.shape = add(self.shape,translate(pad_TQFP_v,2.5*d,-c,0)) self.pad.append(point(2.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB3',angle=90,line=s)) # # pin 16: PB4/PCINT4/MISO # self.shape = add(self.shape,translate(pad_TQFP_v,3.5*d,-c,0)) self.pad.append(point(3.5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB4',angle=90,line=s)) # # pin 17: PB5/SCK/PCINT5 # self.shape = add(self.shape,translate(pad_TQFP_h,c,-3.5*d,0)) self.pad.append(point(c,-3.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB5',line=s)) # # pin 18: AVCC # self.shape = add(self.shape,translate(pad_TQFP_h,c,-2.5*d,0)) self.pad.append(point(c,-2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'AVCC',line=s)) # # pin 19: ADC6 # self.shape = add(self.shape,translate(pad_TQFP_h,c,-1.5*d,0)) self.pad.append(point(c,-1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'ADC6',line=s)) # # pin 20: AREF # self.shape = add(self.shape,translate(pad_TQFP_h,c,-.5*d,0)) self.pad.append(point(c,-.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'AREF',line=s)) # # pin 21: GND # self.shape = add(self.shape,translate(pad_TQFP_h,c,.5*d,0)) self.pad.append(point(c,.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND',line=s)) # # pin 22: ADC7 # self.shape = add(self.shape,translate(pad_TQFP_h,c,1.5*d,0)) self.pad.append(point(c,1.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'ADC7',line=s)) # # pin 23: PC0/ADC0/PCINT8 # self.shape = add(self.shape,translate(pad_TQFP_h,c,2.5*d,0)) self.pad.append(point(c,2.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC0',line=s)) # # pin 24: PC1/ADC1/PCINT9 # self.shape = add(self.shape,translate(pad_TQFP_h,c,3.5*d,0)) self.pad.append(point(c,3.5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC1',line=s)) # # pin 25: PC2/ADC2/PCINT10 # self.shape = add(self.shape,translate(pad_TQFP_v,3.5*d,c,0)) self.pad.append(point(3.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC2',angle=90,line=s)) # # pin 26: PC3/ADC3/PCINT11 # self.shape = add(self.shape,translate(pad_TQFP_v,2.5*d,c,0)) self.pad.append(point(2.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC3',angle=90,line=s)) # # pin 27: PC4/ADC4/SDA/PCINT12 # self.shape = add(self.shape,translate(pad_TQFP_v,1.5*d,c,0)) self.pad.append(point(1.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC4',angle=90,line=s)) # # pin 28: PC5/ADC5/SCL/PCINT13 # self.shape = add(self.shape,translate(pad_TQFP_v,.5*d,c,0)) self.pad.append(point(.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC5',angle=90,line=s)) # # pin 29: PC6/-RESET/PCINT14 # self.shape = add(self.shape,translate(pad_TQFP_v,-.5*d,c,0)) self.pad.append(point(-.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC6',angle=90,line=s)) # # pin 30: PD0/RXD/PCINT16 # self.shape = add(self.shape,translate(pad_TQFP_v,-1.5*d,c,0)) self.pad.append(point(-1.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD0',angle=90,line=s)) # # pin 31: PD1/TXD/PCINT17 # self.shape = add(self.shape,translate(pad_TQFP_v,-2.5*d,c,0)) self.pad.append(point(-2.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD1',angle=90,line=s)) # # pin 32: PD2/INT0/PCINT18 # self.shape = add(self.shape,translate(pad_TQFP_v,-3.5*d,c,0)) self.pad.append(point(-3.5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD2',angle=90,line=s)) class ATmega644_TQFP(part): def __init__(self,value=''): c = .235 d = .031 self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: PB5/PCINT13/MOSI # self.shape = translate(pad_TQFP_h,-c,5*d,0) self.pad.append(point(-c,5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'*MOSI (1)')) # # pin 2: PB6/PCINT14/MISO # self.shape = add(self.shape,translate(pad_TQFP_h,-c,4*d,0)) self.pad.append(point(-c,4*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'MISO')) # # pin 3: PB7/PCINT15/SCK # self.shape = add(self.shape,translate(pad_TQFP_h,-c,3*d,0)) self.pad.append(point(-c,3*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 4: -RESET # self.shape = add(self.shape,translate(pad_TQFP_h,-c,2*d,0)) self.pad.append(point(-c,2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'-RESET')) # # pin 5: VCC # self.shape = add(self.shape,translate(pad_TQFP_h,-c,d,0)) self.pad.append(point(-c,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 6: GND # self.shape = add(self.shape,translate(pad_TQFP_h,-c,0,0)) self.pad.append(point(-c,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 7: XTAL2 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-d,0)) self.pad.append(point(-c,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'XTAL2')) # # pin 8: XTAL1 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-2*d,0)) self.pad.append(point(-c,-2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'XTAL1')) # # pin 9: PD0/PCINT24/RXD0 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-3*d,0)) self.pad.append(point(-c,-3*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RXD0')) # # pin 10: PD1/PCINT25/TXD0 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-4*d,0)) self.pad.append(point(-c,-4*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'TXD0')) # # pin 11: PD2/PCINT26/INT0 # self.shape = add(self.shape,translate(pad_TQFP_h,-c,-5*d,0)) self.pad.append(point(-c,-5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD2')) # # pin 12: PD3/PCINT27/INT1 # self.shape = add(self.shape,translate(pad_TQFP_v,-5*d,-c,0)) self.pad.append(point(-5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD3')) # # pin 13: PD4/PCINT28/OC1B # self.shape = add(self.shape,translate(pad_TQFP_v,-4*d,-c,0)) self.pad.append(point(-4*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD4')) # # pin 14: PD5/PCINT28/OC1A # self.shape = add(self.shape,translate(pad_TQFP_v,-3*d,-c,0)) self.pad.append(point(-3*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD5')) # # pin 15: PD6/PCINT30/OC2B/ICP # self.shape = add(self.shape,translate(pad_TQFP_v,-2*d,-c,0)) self.pad.append(point(-2*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD6')) # # pin 16: PD7/PCINT31/OC2A # self.shape = add(self.shape,translate(pad_TQFP_v,-d,-c,0)) self.pad.append(point(-d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PD7')) # # pin 17: VCC # self.shape = add(self.shape,translate(pad_TQFP_v,0,-c,0)) self.pad.append(point(0,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 18: GND # self.shape = add(self.shape,translate(pad_TQFP_v,d,-c,0)) self.pad.append(point(d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 19: PC0/PCINT16/SCL # self.shape = add(self.shape,translate(pad_TQFP_v,2*d,-c,0)) self.pad.append(point(2*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC0')) # # pin 20: PC1/PCINT17/SDA # self.shape = add(self.shape,translate(pad_TQFP_v,3*d,-c,0)) self.pad.append(point(3*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC1')) # # pin 21: PC2/PCINT18/TCK # self.shape = add(self.shape,translate(pad_TQFP_v,4*d,-c,0)) self.pad.append(point(4*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC2')) # # pin 22: PC3/PCINT19/TMS # self.shape = add(self.shape,translate(pad_TQFP_v,5*d,-c,0)) self.pad.append(point(5*d,-c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC3')) # # pin 23: PC4/TDO/PCINT20 # self.shape = add(self.shape,translate(pad_TQFP_h,c,-5*d,0)) self.pad.append(point(c,-5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC4')) # # pin 24: PC5/TDI/PCINT21 # self.shape = add(self.shape,translate(pad_TQFP_h,c,-4*d,0)) self.pad.append(point(c,-4*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC5')) # # pin 25: PC6/TOSC1/PCINT22 # self.shape = add(self.shape,translate(pad_TQFP_h,c,-3*d,0)) self.pad.append(point(c,-3*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC6')) # # pin 26: PC7/TOSC2/PCINT23 # self.shape = add(self.shape,translate(pad_TQFP_h,c,-2*d,0)) self.pad.append(point(c,-2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PC7')) # # pin 27: AVCC # self.shape = add(self.shape,translate(pad_TQFP_h,c,-d,0)) self.pad.append(point(c,-d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'AVCC')) # # pin 28: GND # self.shape = add(self.shape,translate(pad_TQFP_h,c,0,0)) self.pad.append(point(c,0,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 29: AREF # self.shape = add(self.shape,translate(pad_TQFP_h,c,d,0)) self.pad.append(point(c,d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'AREF')) # # pin 30: PA7/ADC7/PCINT7 # self.shape = add(self.shape,translate(pad_TQFP_h,c,2*d,0)) self.pad.append(point(c,2*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA7')) # # pin 31: PA6/ADC6/PCINT6 # self.shape = add(self.shape,translate(pad_TQFP_h,c,3*d,0)) self.pad.append(point(c,3*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA6')) # # pin 32: PA5/ADC5/PCINT5 # self.shape = add(self.shape,translate(pad_TQFP_h,c,4*d,0)) self.pad.append(point(c,4*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA5')) # # pin 33: PA4/ADC4/PCINT4 # self.shape = add(self.shape,translate(pad_TQFP_h,c,5*d,0)) self.pad.append(point(c,5*d,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA4')) # # pin 34: PA3/ADC3/PCINT3 # self.shape = add(self.shape,translate(pad_TQFP_v,5*d,c,0)) self.pad.append(point(5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA3')) # # pin 35: PA2/ADC2/PCINT2 # self.shape = add(self.shape,translate(pad_TQFP_v,4*d,c,0)) self.pad.append(point(4*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA2')) # # pin 36: PA1/ADC1/PCINT1 # self.shape = add(self.shape,translate(pad_TQFP_v,3*d,c,0)) self.pad.append(point(3*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA1')) # # pin 37: PA0/ADC0/PCINT0 # self.shape = add(self.shape,translate(pad_TQFP_v,2*d,c,0)) self.pad.append(point(2*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PA0')) # # pin 38: VCC # self.shape = add(self.shape,translate(pad_TQFP_v,d,c,0)) self.pad.append(point(d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VCC')) # # pin 39: GND # self.shape = add(self.shape,translate(pad_TQFP_v,0,c,0)) self.pad.append(point(0,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 40: PB0/XCK0/T0/PCINT8 # self.shape = add(self.shape,translate(pad_TQFP_v,-d,c,0)) self.pad.append(point(-d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB0')) # # pin 41: PB1/T1/CLKO/PCINT9 # self.shape = add(self.shape,translate(pad_TQFP_v,-2*d,c,0)) self.pad.append(point(-2*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB1')) # # pin 42: PB2/AIN0/INT2/PCINT10 # self.shape = add(self.shape,translate(pad_TQFP_v,-3*d,c,0)) self.pad.append(point(-3*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB2')) # # pin 43: PB3/AIN1/OC0A/PCINT11 # self.shape = add(self.shape,translate(pad_TQFP_v,-4*d,c,0)) self.pad.append(point(-4*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB2')) # # pin 44: PB4/-SS/OC0B/PCINT12 # self.shape = add(self.shape,translate(pad_TQFP_v,-5*d,c,0)) self.pad.append(point(-5*d,c,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'PB4')) TSSOP_pad_width = 0.040 TSSOP_pad_height = 0.011 TSSOP_pad_dy = 0.026 TSSOP_pad_dx = 0.120 pad_TSSOP = cube(-TSSOP_pad_width/2.0,TSSOP_pad_width/2.0,-TSSOP_pad_height/2.0,TSSOP_pad_height/2.0,0,0) class TRC102(part): # # RFM TRC102 ISM transceiver # def __init__(self,value=''): self.value = value self.pad = [point(0,0,0)] self.labels = [] # # pin 1: SDI # self.shape = translate(pad_TSSOP,-TSSOP_pad_dx,3.5*TSSOP_pad_dy,0) self.pad.append(point(-TSSOP_pad_dx,3.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'1 SDI')) # # pin 2: SCK # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,2.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,2.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SCK')) # # pin 3: nCS # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,1.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,1.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'nCS')) # # pin 4: SDO # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,0.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,0.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'SDO')) # # pin 5: IRQ # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,-0.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,-0.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'IRQ')) # # pin 6: DATA/nFSEL # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,-1.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,-1.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'DATA')) # # pin 7: CR # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,-2.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,-2.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CR')) # # pin 8: CLKOUT # self.shape = add(self.shape,translate(pad_TSSOP,-TSSOP_pad_dx,-3.5*TSSOP_pad_dy,0)) self.pad.append(point(-TSSOP_pad_dx,-3.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'CLKOUT')) # # pin 9: Xtal/Ref # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,-3.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,-3.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'Xtal')) # # pin 10: RESET # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,-2.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,-2.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RESET')) # # pin 11: GND # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,-1.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,-1.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'GND')) # # pin 12: RF_P # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,-0.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,-0.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RF_P')) # # pin 13: RF_N # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,0.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,0.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RF_N')) # # pin 14: VDD # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,1.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,1.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'VDD')) # # pin 15: RSSIA # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,2.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,2.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'RSSIA')) # # pin 16: nINT/DDET # self.shape = add(self.shape,translate(pad_TSSOP,TSSOP_pad_dx,3.5*TSSOP_pad_dy,0)) self.pad.append(point(TSSOP_pad_dx,3.5*TSSOP_pad_dy,0)) self.labels.append(self.text(self.pad[-1].x,self.pad[-1].y,self.pad[-1].z,'nINT')) class CBA(part): # # CBA logo # def __init__(self,r=.02): self.value = '' self.pad = [point(0,0,0)] self.labels = [] d = 3*r self.shape = cylinder(0,0,0,0,r) self.shape = add(self.shape,translate(cylinder(0,0,0,0,r),-d,d,0)) self.shape = add(self.shape,translate(cube(-r,r,-r,r,0,0),-d,0,0)) self.shape = add(self.shape,translate(cube(-r,r,-r,r,0,0),-d,-d,0)) self.shape = add(self.shape,translate(cube(-r,r,-r,r,0,0),0,-d,0)) self.shape = add(self.shape,translate(cube(-r,r,-r,r,0,0),d,-d,0)) self.shape = add(self.shape,translate(cube(-r,r,-r,r,0,0),d,0,0)) self.shape = add(self.shape,translate(cube(-r,r,-r,r,0,0),d,d,0)) self.shape = add(self.shape,translate(cube(-r,r,-r,r,0,0),0,d,0)) class fab(part): def __init__(self,r=.05): self.value = '' self.pad = [point(0,0,0)] self.labels = [] d = 1.8*r l = 3.5*r h = r/2. self.shape = rectangle(-d,d,-d,d) self.shape = subtract(self.shape,circle(0,0,r)) self.shape = subtract(self.shape,rectangle(-l,0,-h,h)) self.shape = add(self.shape,rectangle(d,l,-h,h)) self.shape = add(self.shape,circle(l,0,r)) self.shape = add(self.shape,circle(-l,0,r)) ############################################################ # define board ############################################################ width = 0.94 # board width height = 1.15 # board height x = 1 # x origin y = 1 # y origin zt = 0 # top z zb = -0.06 # bottom z rv = 0.007 # via radius rp = 0.014 # via pad radius vt = 0.004 # via text size w = .015 # wire width w1 = .01 # fine wire width mask = .004 # solder mask size pcb = PCB(x,y,width,height,mask) IC1 = XIAO_RP2040('IC1\nXIAO\nRP2040') pcb = IC1.add(pcb,x+.4,y+height-0.42) IC2 = ICS43434_6049('IC2\nICS-43434',zb,zt) pcb = IC2.add(pcb,IC1.x,IC1.pad[7].y-.24,angle=-90) pcb = wire(pcb,w, IC2.pad[2], point(IC2.pad[2].x,IC2.pad[2].y-.08), point(IC1.pad[9].x+.08,IC2.pad[2].y-.08), point(IC1.pad[9].x+.08,IC1.pad[9].y), IC1.pad[9]) pcb = wire(pcb,w, IC2.pad[3], point(IC2.pad[3].x,IC2.pad[3].y-.11), point(IC1.pad[10].x+.11,IC2.pad[3].y-.11), point(IC1.pad[10].x+.11,IC1.pad[10].y), IC1.pad[10]) pcb = wire(pcb,w, IC2.pad[4], point(IC2.pad[4].x,IC2.pad[4].y+.08), point(IC1.pad[8].x,IC2.pad[4].y+.08), IC1.pad[8]) pcb = wire(pcb,w, IC2.pad[5], point(IC2.pad[5].x,IC2.pad[5].y+.08), point(IC2.pad[6].x-.1,IC2.pad[5].y+.08), point(IC2.pad[6].x-.1,IC2.pad[5].y-.17), point(IC1.pad[13].x+.17,IC2.pad[5].y-.17), point(IC1.pad[13].x+.17,IC1.pad[13].y), IC1.pad[13]) pcb = wire(pcb,w, IC2.pad[6], point(IC2.pad[6].x,IC2.pad[6].y-.14), point(IC1.pad[12].x+.14,IC2.pad[6].y-.14), point(IC1.pad[12].x+.14,IC1.pad[12].y), IC1.pad[12]) ############################################################ # select output ############################################################ outputs = {} if (output == "top, labels, and exterior"): outputs["function"] = add(add(color(Tan,pcb.board),pcb.labels), color(White,pcb.exterior)) outputs["layers"] = [zt] elif (output == "top, labels, holes, and exterior"): outputs["function"] = add(add(color(Tan,pcb.board),pcb.labels), add(color(White,pcb.exterior),color(Blue,pcb.holes))) outputs["layers"] = [zt] elif (output == "top, bottom, labels, and exterior"): outputs["function"] = add(add(color(Tan,pcb.board),pcb.labels), color(White,pcb.exterior)) outputs["layers"] = [zb,zt] elif (output == "top, bottom, labels, holes, and exterior"): outputs["function"] = add(add(color(Tan,pcb.board),pcb.labels), add(color(White,pcb.exterior),color(Blue,pcb.holes))) outputs["layers"] = [zb,zt] elif (output == "top traces"): outputs["function"] = color(White,pcb.board) outputs["layers"] = [zt] elif (output == "top traces and exterior"): outputs["function"] = color(White,add(pcb.board,pcb.exterior)) outputs["layers"] = [zt] elif (output == "bottom traces"): outputs["function"] = color(White,pcb.board) outputs["layers"] = [zb] elif (output == "bottom traces reversed"): outputs["function"] = color(White, reflect_x(pcb.board,2*x+width)) outputs["layers"] = [zb] elif (output == "bottom traces reversed and exterior"): outputs["function"] = color(White, reflect_x(add(pcb.board,pcb.exterior),2*x+width)) outputs["layers"] = [zb] elif (output == "interior"): outputs["function"] = color(White,pcb.interior) outputs["layers"] = [zt] elif (output == "exterior"): outputs["function"] = color(White,pcb.exterior) outputs["layers"] = [zt] elif (output == "holes"): outputs["function"] = color(White, subtract(add(pcb.exterior,pcb.interior),pcb.holes)) outputs["layers"] = [zb] elif (output == "holes and interior"): outputs["function"] = color(White, subtract(pcb.interior,pcb.holes)) outputs["layers"] = [zb] elif (output == "top solder mask"): outputs["function"] = color(White,pcb.mask) outputs["layers"] = [zt] elif (output == "bottom solder mask"): outputs["function"] = color(White,pcb.mask) outputs["layers"] = [zb] else: print("oops -- don't recognize output") ############################################################ # set limits and parameters ############################################################ border = 0.05 outputs["xmin"] = x-border # min x to render outputs["xmax"] = x+width+border # max x to render outputs["ymin"] = y-border # min y to render outputs["ymax"] = y+height+border # max y to render outputs["mm_per_unit"] = 25.4 # use inch units outputs["type"] = "RGB" # use RGB color ############################################################ # send output ############################################################ json.dump(outputs,sys.stdout)